What blade did you EDC today?

[Cereal_killer]

Today I’m carying one of my CMFTW customs. This one of my own design (though right up his alley design wise)
4.5”
CPM D2 hardened to 60-61
OD Micarta

Pic not from today, this tree is [thankfully] much fuller and healthier now!

[isti242]

@MascaratumB

I do have one question: does this knife open easily on a pocket? That may be the only drawback, in case it does open easily!
Thanks for the review

It hasn’t opened in my pocket yet. Since it has a tip up carry pocket clip and a sheepfoot blade without a tip which will sit in your pocket against the rim of the pocket it’s not likely it’ll cause any problem.

[MascaratumB]

@isti242

@MascaratumB

I do have one question: does this knife open easily on a pocket? That may be the only drawback, in case it does open easily!
Thanks for the review

It hasn’t opened in my pocket yet. Since it has a tip up carry pocket clip and a sheepfoot blade without a tip which will sit in your pocket against the rim of the pocket it’s not likely it’ll cause any problem.

Thank you once again for answering my questions I will definitely get one of these Just have to decide where from :money_mouth_face:

[BrightKen]

The postman dropped off 2 knives from KnifeCenter.

The Schrade SCHA5BR and the Kershaw Natrix both knives cost me $47.90.

[DB_Custom (Dale)]

Carrying my Randy Larsen Custom Damascus today with the burl mesquite scales. Use this pretty much strictly for food purposes… had it over 3 years already, time flies!

[lumenzilla]

@DB Custom

Carrying my Randy Larsen Custom Damascus today with the burl mesquite scales. Use this pretty much strictly for food purposes… had it over 3 years already, time flies!

Beautiful looking blade :+1:

[isti242]

Fura Gear “Shrapnel” (review here):

[xatu]

@isti242

@xatu

It would be fastastic to see some land-sanrenmu knives with frame lock with disc, replaceable frame lock, ball bearings and… a flipper
A step more.

A couple of new full sized frame-lock Sanrenmu flippers arrived to GB with Sandvik 12C27 blade and Beta Lock safety switch / lock-bar limiter. As I know they also run on bearings. So the only thing you will miss is the lock-bar insert.

Yes, i know the new models from Sanrenmu, i like for example the 9002 model. And it’s from Sanrenmu, not Land.

[MascaratumB]

Carried my Sanrenmu (w/ slightly moded clip)

[strayz]

@DB Custom

Carrying my Randy Larsen Custom Damascus today with the burl mesquite scales. Use this pretty much strictly for food purposes… had it over 3 years already, time flies!

3 years and still looking good, I remember seeing a picture of that a while back.

[isti242]

Ganzo FB7621 (review here) this weekend:

[isti242]

Y-Start titanium flipper:

[Adahn]

TwoSun calles it the “Curve”, I call it The Chef’s Folder.

[DB_Custom (Dale)]

I wanted a small box-cutter that wouldn’t rust, Blade HQ helped me out with the Stedemon Knives Mini-01, a Titanium frame lock with CTS 204-P blade steel that is thick, has a nice point on it, and should hold a great edge.

Very unique flipper, with the flipper mechanism on the end of the knife where it doesn’t exactly show itself for what it is. Pretty clever, nicely made, ceramic bearings and ball detent. Quick and easy to use, small and unobtrusive in the pocket.

[weklund]

[isti242]

Compact titanium flipper with D2 blade:

[Thedishdoc]

What make and model is that? Do you have a link to it? I’d like to own one of those.

[isti242]

@Thedishdoc

What make and model is that? Do you have a link to it? I’d like to own one of those.

It’s a non-branded folder which you can find in different versions on Aliexpress here or here .

[Thedishdoc]

What model number is that Ganzo?

[alchemi]

Spyderco Roadie. UK knife laws restrict general carry to non-locking blades under 3 inches