Interested. XHP70.2, CW, silver. Thank you.
Does anyone know what the supplied lanyard is? Braided black white or the classic olive green Haikelite?
I am interested in what the price will be.
Thank you for your support!
Can anyone advise where to find the stepdown time and sustainable lumes output after the stepdown?
Olive green
I’m interested, XHP70.2 NW
70.2 NW
There is no step down time, the MT09R is set to temperature step down.
And I think there is not a real sustainable level after one step down. It is so hot you better switch it off.
My lamp steps down after 35 to 40 seconds in Turbo.
Notice also: the top of the ramp is 50% output.
This should give a bit more time.
I am not quite sure but I think I had a play time in Turbo for about 15 minutes and the batteries (30Q) where at 3.7V. It eats batteries like nothing.
I think it is mentioned before, but this lamp doesn’t do 24 klm. 17 to 18 klm was measured by other users.
I don’t mind, this lamp is sick and a lot of fun.
It’s the first light I am a bit scared of it. When I transport in a bag I remove the batteries before.
It is a very nice light.
Interested (XHP70.2 NW).
Ordered XHP35 silver. Thanks!
In for XHP35 Silver
In for the 70.2 NW
Ordered a 70.2
Interested in the 70.2 ver
Interested. XHP70.2 
Very interested!
Put me down for a silver 70.2 MT09R in CW.
Have any samples of this new factory version been tested yet?
I’m hoping they stuck to TA’s driver design and didn’t tinker with it.
It’s been awhile since I read it in Terry’s thread but I vaguely recall TA’s driver not fully lighting up the LED of the on/off switch. If I am recalling that correctly then I do hope the factory driver lives up to TA’s specs and the switch is properly lit. Maybe TA can confirm or correct me if he see’s this.
Interested in price as well.
The Switch LED should work fine, although only 1 of them can be lit up since they are different colors. They are using the green LED IIRC but I have not gotten a sample to test for myself.
Ordered silver 70.2 NW yesterday.