Emisar D4S review

First time ordering frim intl-outdoor… ordered a gray xpl hi 5000k with magnetic tail cap…

Ordered! Green 5000k xpl hi. Ended up ordering a could Shockli 5500 batteries instead. Very excited!

Im not allowed to get one because saving for vacation……and i just ordered one, but to my work address to avoid wife agro. 4000k XP-L :slight_smile:

Black XPL-Hi 5000k. Can’t wait to get it! Thank you!

Ordered, Grey XP-L HI V2 5D, 4000K - just could not wait - budget in flames - :weary:

Ordered, Grey XP-L HI V2 3A, 5000K with magnetic tail cap!

Ordered
Nichia in green

Ordered Grey, Neutral White - XP-G2 S4 3D, 4885K, magnetic tailcap.

I got my 33mm Quad boards with the optics yesterday. I put 4 of the new Samsung LH351D in 5000K tint at 80CRI on one of them and tested it outside of a light, connected directly to a cell via 18ga leads. On an LG HE4 it made some 4200 lumens, but on an iJoy 21700 it did 5500 lumens at 16.3A. This was the MCPCB with emitters and the optic, two leads coming off it.

Pretty nice beam profile, nice color. Will make a really good light. :smiley:

Edit: I found the color tint to be similar to that of an egg from the Salmon Faverolle chicken…

That’s a nice rosy tint on that Salmon Faverolle egg. :+1:

Mallard eggs are a beautiful color, but not for a flashlight tint. :smiley:

can someone measure the MCPCB screw hole distance?
Are those M2.5mm?

Green 5000k xpl hi version w/both tails. Hope the green is closer to the drake’s head than his offspring. :confounded:

(I wish for a smooth green D1S to complete my set)

Do you guys think it’s better if I wait out for a while to buy the d4s? Kind of like the d4 originally shipped with the v1 and only later with the v2 software?

Goshdogit! My old HD2010 is a Mallard Egg! :stuck_out_tongue:

Stu, the development of the D4 was a new venture, so yes some improvements were made. This is a more seasoned venture and TK has tweaked the firmware for Hank yet more so I would bet it’d be safe to go with the D4S straightaway. If I hadn’t just spent a hundred bucks on other things I’d be all over this, you can bank on that!

Just pre-ordered at mtn electronics…XP-L HI 3A | Green…weeeee!

Magnetic tail cap option from Mtn Electronics?

Reading this thread and saw the pre order available. Got excited and jumped over to Mtn Electronics and ordered one with XPL 5000K even though I shouldn’t spend that money now.

I forgot about the magnetic tail cap.

Went back and read through order options many times.

Where am I missing option to order magnetic tailcap?

Thanks

Is that going to be with the switch powered off that has the secondary lights on sub moon mode (Locator lights?)?

I also feel your pain about just buying lights. I managed to get this one in even thought I had just bought 3 Olight PL Mini Valkyries during the Olight sale.

I think only int outdoors has the magnet option.

Anyone know if Mtnelectronics would swap in some LH351D’s for an added fee? Really want to order one of these but would prefer it with those LEDs.