FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public

Put me down for 1.

Sorry, you say you have one like that? :expressionless:
Are you referring to the FW3A or other flashlight or thing?

You name is already in the list pepinfaxera:

See #1312 and #1313!

Post #1 is not updated!

TK, any possibility to do that so that it keeps being updated ?
Thanks :wink:

hanoilighting208 is not on the list.
I think he’s asking to be included,
that says: Put me down for 1.
.
Problem with translators
hanoilighting208 is from Viet Nam.

AHHH, I also thought about that, the possibility of him being being requesting to be put in the list! (I have one like that >>> I want one like that :wink: )
It makes more sense now!

But as sometimes there are “leaks” from manufacturers, I considered the possibility that a sample might have been released! Hopefully it is not the case :wink:
Thanks again pepinfaxera :wink:

Please put me down for 1. Thank you so much for taking the time to do all of this. I try to check back as often as possible just to make sure I didn’t miss an email notification. Thanks!

Thank you!

damn ,haven’t been on BLF for quite awhile due to my service but its nice to see the FW3A is moving along nicely , could i please get another light added to my current position at 185 to a total of 2 fw3a’s. Thank you :smiley:

It’s moving along? Did I miss something?

Yeah, you missed “haven’t been on BLF for quite awhile due to my service” :stuck_out_tongue:

Emitter and temp polls were completed a while ago and there has been discussion with the manufacturer about them IIRC.

Another post 2 or 3 weeks ago said things are starting to wrap up from the sound of it.

I jest, still can’t believe after 15 months they haven’t sent out a prototype for approval yet :stuck_out_tongue:

They’ve sent 2 different ones so far. IIRC

I must have missed that, were there problems? If not, why aren’t these being mass produced?
We only just decided via polls the popular tints and LED’s, have they done a prototype since then?

All this info is in post 1.

First proto was just before Xmas last year. Be nice to have this in production before this Xmas :weary: :person_facepalming:

There’s much more to releasing a product like this than simply having a prototype. Not to mention, they just got the results from the polls like you said, and there will be work testing, deciding on and sourcing the emitters.

They’re trying to do something about wear on the inner tube which could result in the button input becoming constantly in the pressed state.

Please put me down for 1 light

1 light please and thanks.