Sorry, you say you have one like that? .
Are you referring to the FW3A or other flashlight or thing?
hanoilighting208 is not on the list.
I think he’s asking to be included,
that says: Put me down for 1.
.
Problem with translators
hanoilighting208 is from Vietnam.
AHHH, I also thought about that, the possibility of him being being requesting to be put in the list! (I have one like that >>> I want one like that )
It makes more sense now!
But as sometimes there are “leaks” from manufacturers, I considered the possibility that a sample might have been released! Hopefully it is not the case
Thanks again pepinfaxera
Please put me down for 1. Thank you so much for taking the time to do all of this. I try to check back as often as possible just to make sure I didn’t miss an email notification. Thanks!
damn ,haven’t been on BLF for quite awhile due to my service but its nice to see the FW3A is moving along nicely , could i please get another light added to my current position at 185 to a total of 2 fw3a’s. Thank you
damn ,haven’t been on BLF for quite awhile due to my service but its nice to see the FW3A is moving along nicely , could i please get another light added to my current position at 185 to a total of 2 fw3a’s. Thank you
damn ,haven’t been on BLF for quite awhile due to my service but its nice to see the FW3A is moving along nicely , could i please get another light added to my current position at 185 to a total of 2 fw3a’s. Thank you
It’s moving along? Did I miss something?????
Yeah, you missed “haven’t been on BLF for quite awhile due to my service”
—
The Cycle of Goodness: “No one prospers without rendering benefit to others”
- The YKK Philosophy
damn ,haven’t been on BLF for quite awhile due to my service but its nice to see the FW3A is moving along nicely , could i please get another light added to my current position at 185 to a total of 2 fw3a’s. Thank you
It’s moving along? Did I miss something?????
Emitter and temp polls were completed a while ago and there has been discussion with the manufacturer about them IIRC.
Another post 2 or 3 weeks ago said things are starting to wrap up from the sound of it.
I jest, still can’t believe after 15 months they haven’t sent out a prototype for approval yet
They’ve sent 2 different ones so far. IIRC
I must have missed that, were there problems? If not, why aren’t these being mass produced?
We only just decided via polls the popular tints and LED’s, have they done a prototype since then?
I jest, still can’t believe after 15 months they haven’t sent out a prototype for approval yet
They’ve sent 2 different ones so far. IIRC
I must have missed that, were there problems? If not, why aren’t these being mass produced?
We only just decided via polls the popular tints and LED’s, have they done a prototype since then?
There’s much more to releasing a product like this than simply having a prototype. Not to mention, they just got the results from the polls like you said, and there will be work testing, deciding on and sourcing the emitters.
Oh, hey, haven’t seen you around for ages. I hope things have been going well.
I’m way behind on the interest list, but hopefully I can update the main list soon. Pepinfaxera is doing most of the work there, which is very helpful.
Oh, hey, haven’t seen you around for ages. I hope things have been going well.
I’m way behind on the interest list, but hopefully I can update the main list soon. Pepinfaxera is doing most of the work there, which is very helpful.
I’m pleased you even remember me. I’m back and still craving the impossible. As for the wait, it’s not a problem and I appreciate the heads-up.
—
"Those who hammer their guns into plows will plow for those who do not."
Speaking of which, here’s what the aforementioned light did to my neutral-density filter in just three seconds when I tried to attenuate the output for measurement purposes. It left a lasting impression too:
I am new to posting on this BLF forum. I’ve posted I’d like to buy 1 of these with the LH351D but I haven’t made it on to the list yet. Sorry to be a pain, I think what you all are doing is really awesome!
I am new to posting on this BLF forum. I’ve posted I’d like to buy 1 of these with the LH351D but I haven’t made it on to the list yet. Sorry to be a pain, I think what you all are doing is really awesome!
Speaking of which, here’s what the aforementioned light did to my neutral-density filter in just three seconds when I tried to attenuate the output for measurement purposes. It left a lasting impression too
Ouch. At least from now on you’ll always put the filter on the meter.
AHHH, I also thought about that, the possibility of him being being requesting to be put in the list! (I have one like that >>> I want one like that
)
It makes more sense now!
But as sometimes there are “leaks” from manufacturers, I considered the possibility that a sample might have been released! Hopefully it is not the case
Thanks again pepinfaxera
[REVIEWS] AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 /// SOFIRN: SF14 & SP10A / SP32A / SP10B /// NITEFOX: UT20 / ES10K / K3 /// ODEPRO: KL52 / B108 /// ACEBEAM: H20 /// BLITZWOLF: BW-ET1 /// DQG: AA Slim Ti /// HC-LIGHTS: SS AAA /// XTAR: PB2 Charger /// OLIGHT: M2R Warrior /// WUBEN: TO10R / E05 / T70 / E10 /// ON THE ROAD: M1 / i3 / M3 Pro /// ROVYVON: A2 & A5R / E300S / A8 /// KLARUS: XT1C /// LUMINTOP: Tool AA V2.0 & Tool 25
Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 /// TIR Lenses:1 / 2 /// Others: Biscotti 3 & 1*7135 / Triple TIR & XP-G2 ///// My Collection ///// My Review's Blog (PT)
GIVEAWAY: 1
Please put me down for 1. Thank you so much for taking the time to do all of this. I try to check back as often as possible just to make sure I didn’t miss an email notification. Thanks!
Thank you!
damn ,haven’t been on BLF for quite awhile due to my service but its nice to see the FW3A is moving along nicely , could i please get another light added to my current position at 185 to a total of 2 fw3a’s. Thank you
People actually read these??? Hi there.
It’s moving along? Did I miss something?????
Yeah, you missed “haven’t been on BLF for quite awhile due to my service”
The Cycle of Goodness: “No one prospers without rendering benefit to others”
- The YKK Philosophy
Emitter and temp polls were completed a while ago and there has been discussion with the manufacturer about them IIRC.
Another post 2 or 3 weeks ago said things are starting to wrap up from the sound of it.
I jest, still can’t believe after 15 months they haven’t sent out a prototype for approval yet
They’ve sent 2 different ones so far. IIRC
KSGER STM32 2.1S Soldering Station Videos
Convoy L6 thread XHP70.2, TA FET driver, lighted side switch. - Supfire L5-S thread XHP70.2, TA FET driver, lighted side switch. Mini L6! - Thorfire S70S MTN FET driver, custom lighted side switch. - 10 NarsilM user videos for BLF Q8, GT, GT70, GT Mini, GT Micro, Astrolux S43(S) and ROT66
Texas_Ace BLF Calibrated Lumen tube and Maukka Calibration Lights for DIY Lumen Measuring Devices - List of Actively Cooled Lights - Headlight List with prices, specs and features - Jaxmnve M1 Stainless 10180 Keychain light Review - Lumintop ODF30 Review - Sofirn C8F 21700 Teardown and Review, Sofirn SP33 v2 XHP50.2 Review - My Sofirn Q8 Results - Astrolux S43S 219C Test Results - Lumintop GT Mini Test Results - Lumintop GT Micro Test Results - FW3A 3D Test Results
I must have missed that, were there problems? If not, why aren’t these being mass produced?
We only just decided via polls the popular tints and LED’s, have they done a prototype since then?
All this info is in post 1.
KSGER STM32 2.1S Soldering Station Videos
Convoy L6 thread XHP70.2, TA FET driver, lighted side switch. - Supfire L5-S thread XHP70.2, TA FET driver, lighted side switch. Mini L6! - Thorfire S70S MTN FET driver, custom lighted side switch. - 10 NarsilM user videos for BLF Q8, GT, GT70, GT Mini, GT Micro, Astrolux S43(S) and ROT66
Texas_Ace BLF Calibrated Lumen tube and Maukka Calibration Lights for DIY Lumen Measuring Devices - List of Actively Cooled Lights - Headlight List with prices, specs and features - Jaxmnve M1 Stainless 10180 Keychain light Review - Lumintop ODF30 Review - Sofirn C8F 21700 Teardown and Review, Sofirn SP33 v2 XHP50.2 Review - My Sofirn Q8 Results - Astrolux S43S 219C Test Results - Lumintop GT Mini Test Results - Lumintop GT Micro Test Results - FW3A 3D Test Results
First proto was just before Xmas last year. Be nice to have this in production before this Xmas
Vape conversion #4 -- UF2100 Makeover -- Ti-mo -- 6th O-L comp entry -- Titanium Build -- Hunting Light -- 21700 Tube Light -- Stripey mtg2 Light -- UV Light -- Colour V4A Light -- Copper 26650 Light -- Quad xhp35 Light -- Finger Sizzler -- Mechanical Mod Light
There’s much more to releasing a product like this than simply having a prototype. Not to mention, they just got the results from the polls like you said, and there will be work testing, deciding on and sourcing the emitters.
They’re trying to do something about wear on the inner tube which could result in the button input becoming constantly in the pressed state.
Card Carrying CRI baby
Please put me down for 1 light
1 light please and thanks.
Please put me down for one, thank you!
Put me down for one please.
"Those who hammer their guns into plows will plow for those who do not."
Oh, hey, haven’t seen you around for ages. I hope things have been going well.
I’m way behind on the interest list, but hopefully I can update the main list soon. Pepinfaxera is doing most of the work there, which is very helpful.
Count me in for 2, please. Thanks!
edit: count me in for++
I’m pleased you even remember me. I’m back and still craving the impossible. As for the wait, it’s not a problem and I appreciate the heads-up.
"Those who hammer their guns into plows will plow for those who do not."
Put me down for 2.
LOL, you showed me what not to do with a Sinner Cypreus FET triple. It left a lasting impression.
Speaking of which, here’s what the aforementioned light did to my neutral-density filter in just three seconds when I tried to attenuate the output for measurement purposes. It left a lasting impression too:
I am new to posting on this BLF forum. I’ve posted I’d like to buy 1 of these with the LH351D but I haven’t made it on to the list yet. Sorry to be a pain, I think what you all are doing is really awesome!
One for me, please
Hey mate! you are number
1336 – # Post . lew123
http://budgetlightforum.com/comment/1329701#comment-1329701
When you have a doubt about that, use the “Search within thread functions” to find names or words
Welcome and enjoy your time here
[REVIEWS] AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 /// SOFIRN: SF14 & SP10A / SP32A / SP10B /// NITEFOX: UT20 / ES10K / K3 /// ODEPRO: KL52 / B108 /// ACEBEAM: H20 /// BLITZWOLF: BW-ET1 /// DQG: AA Slim Ti /// HC-LIGHTS: SS AAA /// XTAR: PB2 Charger /// OLIGHT: M2R Warrior /// WUBEN: TO10R / E05 / T70 / E10 /// ON THE ROAD: M1 / i3 / M3 Pro /// ROVYVON: A2 & A5R / E300S / A8 /// KLARUS: XT1C /// LUMINTOP: Tool AA V2.0 & Tool 25
Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 /// TIR Lenses:1 / 2 /// Others: Biscotti 3 & 1*7135 / Triple TIR & XP-G2 ///// My Collection ///// My Review's Blog (PT)
GIVEAWAY: 1
Awesome thank you! I’m excited!!
Ouch. At least from now on you’ll always put the filter on the meter.
@MascaratumB
I do not see my name on the list. My “interest” post was #4379.
Pages