Sofirn SP70 Alone $50, PM for AMZ US CODE(LIMITED)

[BlueSwordM]

Depends.

If they use a 1.1mm thick spring at 10mm height with BeCu C17500 45% IACS, it should be about as good as a 22AWG wire bypass, with a gold plating.

[JasonWW]

@Dioda

Not only side switch bezel but the whole side switch to be metallic, i dont like white buttons that much.

The rubber button cover will be translucent like on the Q8. This way you can see the leds under it.

@PBWilson

Question: Has a price range been set for this or will that only come towards the end once all the details are ironed out?

They have told be the price they are aiming at. It is very good! But they may be waiting until more details are ironed out before they publicly announce it.

[JasonWW]

I’m gonna repost these pics on each page so I can find them easily. I hate having to hunt for stuff. Lol

.

[JasonWW]

@Dioda

Nope, Im all in for the “stacked”, design 1 look. Maximum heat transfer is not everything. That plunger look is a no-no in my design book Will see how it turns out in the end.

All signs point to number 1 and 4 as the most favorite. It’s also what Sofirn prefers, so they will probably go with that. Sorry plunger. (I was rooting for the plunger because I carry it by the head, never the battery tube. I just hope the stepped design does not hurt my hand or feel awkward)

@Dioda

This is getting more interesting every minute. Is there any rough estimate by when first prototypes are ready?

I have not heard anything about when exactly. They are moving quite fast if you ask me. Some lights take a year or more to go from start to finish. Look at the Q8, GT and FW3A. So we just have to be patient.

@Texas_Ace

I would really like to see a cross section of the light.

I don’t have that, yet. I assume they will go with the stepped head 1 and 4 design. So maybe now they will focus more detail on how it needs to be machined, etc…

[Manheim69]

Man the stuff I come across on this website is awesome, I’d totally dig on one of these

[LessDark]

1+ for SMO reflector.
And please make room for protected batteries as well so we have many options for different 26650 cells.

[Yokiamy]

As said earlier, personally i prefer the Kronos K70 prototype head (without the lengthwise cutouts) or the S70 style head with plain straight finning and without crenelations.
The cleaner, the better.

After all this thread is based on the Kronos K70

It depends on the price, but for now i wouldn’t buy one.
I care about aesthetics

[teacher]

Yokiamy, have you got a picture of, or a link to; the Kronos K70 prototype head?

I can’t seem to locate it.

Thanks in advance…… :+1:

[Yokiamy]

@teacher

Yokiamy, have you got a picture of, or a link to; the Kronos K70 prototype head?

I can’t seem to locate it.

Thanks in advance…… :+1:

Yep, page 1 of the Kronos K70 thread (scroll down all names)

Update: 10-22-17. KRONOS K70 GB. $50. 243 on list!

10/22/2017 List is updated. The new driver is indeed outperforming the older version…over 10 amps with AWC batteries! The lumen output is not there though…~4600 lumens. I’m thinking it should be more than that. JohnnyMac has yet to test his…so we’ll see what is going on with his sample…hopefully soon. 9/25/17 List is updated. A BIG goes out to The Miller for keeping the K70 list updated for these past few weeks. I know he and I have clashed at times in the p…

[teacher]

@Yokiamy

@teacher

Yokiamy, have you got a picture of, or a link to; the Kronos K70 prototype head?

I can’t seem to locate it.

Thanks in advance…… :+1:

Yep, page 1 of the Kronos K70 thread (scroll down all names)

Update: 10-22-17. KRONOS K70 GB. $50. 243 on list!

Thank you!!
That looks good. I really like that battery tube too……

[JasonWW]

@Yokiamy

After all, this thread is based on the Kronos K70.

This is a misconception. Sofirn has nothing to do with Kronos. From the beginning they wanted their own unique design.

You might be thinking it was related to the Kronos because they posted in that thread. This was simply because they saw an already assembled group of people who where wanting a particular style of light (L6, S70 K70, EE X9, etc…). That’s all.

[JasonWW]

@Yokiamy

K70

I definitely see some “inspiration” from this light in the Sofirn design. The tail cap shape for sure. The lanyard ring right above the switch. The bottom of the head from the switch to the battery tube has the same shape.

I just hope the Sofirn light has a thinner tail cap. The K70 one seems too fat.

[teacher]

Totally agree about the thinner tail cap. To me, #3 in the picture below looks perfect.

[Yokiamy]

@JasonWW

@Yokiamy

After all, this thread is based on the Kronos K70.

This is a misconception. Sofirn has nothing to do with Kronos. From the beginning they wanted their own unique design.

You might be thinking it was related to the Kronos because they posted in that thread. This was simply because they saw an already assembled group of people who where wanting a particular style of light (L6, S70 K70, EE X9, etc…). That’s all.

Correct, they have nothing to do with Kronos, but they are willing to assemble this kind of light because they saw interest.

I totally like the design of Sofirn, except the shape of the head, it should be more ‘solid’

Just my 2 cents

[lostheplot]

I like no4 all black ,
may be interested depending on final price

[kntx]

@Yokiamy

@Dioda

@PBWilson

I like how this is coming along. I do prefer the stepped head look over the rounded “toilet plunger” look but as it was said a number of times before: form follows function.

I believe that many of us are more demanding than just “form follows function” and the overall aesthetics play an important role. While the stepped design looks really high-end and gets my wallet ready, I would probably skip the cheapo “toilet-plunger” look.

If we were only after form, why not to mill just a hole in a thick slab of aluminium for best heat transfer?

Because you need fins to create more surface area to exchange the heat.

But i feel with you, i prefer the S70 head look.

At first, i thought the X5/X6 style would be nice, but that looks don’t work on this light.

If you make deeper fins on the S70 style light, it would be a beast since it can be made with thick aluminium and much surface area which equals better cooling.

I would really like this look for this light

[JasonWW]

@kntx

@Yokiamy

@Dioda

@PBWilson

I like how this is coming along. I do prefer the stepped head look over the rounded “toilet plunger” look but as it was said a number of times before: form follows function.

I believe that many of us are more demanding than just “form follows function” and the overall aesthetics play an important role. While the stepped design looks really high-end and gets my wallet ready, I would probably skip the cheapo “toilet-plunger” look.

If we were only after form, why not to mill just a hole in a thick slab of aluminium for best heat transfer?

Because you need fins to create more surface area to exchange the heat.

But i feel with you, i prefer the S70 head look.

At first, i thought the X5/X6 style would be nice, but that looks don’t work on this light.

If you make deeper fins on the S70 style light, it would be a beast since it can be made with thick aluminium and much surface area which equals better cooling.

I would really like this look for this light

Just making the picture show.

[Sofirn (Sofirnlight)]

Final design, please check it.

[Man_Without_Shadow]

Impressive! Good job, Sofirn!

[ZozzV6]

Just two suggestions for better heatsinking. I made changes on the bottom half of picture. It doesn’t cost more to not remove material at some places.