Sofirn Q8 group buy (gb closed, but try PM to Sofirn for discount)

[CJ_Avlis]

In for 1 please…Amazon US.

[eas]

@JasonWW

@eas

is there anyone who wants to buy a Q8 MCPCB with four CW XP-L HI to retrofit an old BLF Q8?

Are you saying you have one that you’d like to sale?

Or am I misunderstanding you?

I can be a little obtuse sometimes.

I’m saying that if I order one of these Sofirn Q8s lights, I’m going to mod it to replace the CW emitters with something else, and since I don’t have anything else to do with them, I’d sell them and the MCPCB as a unit so someone who already has a Q8 and likes CW, so they can have an easy mod and I can cover some of the cost of a new MCPCB and whatever emitters I go with.

[JasonWW]

@eas

@JasonWW

@eas

is there anyone who wants to buy a Q8 MCPCB with four CW XP-L HI to retrofit an old BLF Q8?

Are you saying you have one that you’d like to sale?

Or am I misunderstanding you?

I can be a little obtuse sometimes.

I’m saying that if I order one of these Sofirn Q8s lights, I’m going to mod it to replace the CW emitters with something else, and since I don’t have anything else to do with them, I’d sell them and the MCPCB as a unit so someone who already has a Q8 and likes CW, so they can have an easy mod and I can cover some of the cost of a new MCPCB and whatever emitters I go with.

Okay, now I understand.

[Andybibbville]

+1 for amazon US please.

[Unloco]

@huey18

I can’t seem to find the thread, but I remember someone else pointed out that another company used a white plastic ring around the contact point to allow button tops and flat tops.

Are you referring to this contraption?

Roche M170 Review: Roche M170 XML-T6-3C from FastTech AND FancyFlashlights.

[T18]

Djozz could you please put my two requested as Amazon please, shipping would be very fast.
Thank You

[RobertB]

@JasonWW

Astrolux uses a really nice white plastic ring that is just tall enough to prevent the negative end of a cell from touching, but still allow the flat positive end to touch. I just mentioned this on a ROT66 thread. Getting these tolerances are hard, though. Sofirn may just suggest button tops in the carrier like the current Q8. If you don’t have button tops, solder blob them.

This setup is super common in the Vape industry, and works extremely well. Nobody uses button tops. Barry just needs to get with some Vape companies in Shenzhen.

Excuse the dirt in this 3yr old mod. Ready to replace it, but it won’t die. This one is made by Wismec

[JasonWW]

@Unloco

@huey18

I can’t seem to find the thread, but I remember someone else pointed out that another company used a white plastic ring around the contact point to allow button tops and flat tops.

Are you referring to this contraption?

Roche M170 Review: Roche M170 XML-T6-3C from FastTech AND FancyFlashlights.

I think he’s refering to this:

.

[shirnask]

Reuleaux?

[BlueSwordM]

@FlashPilot, well, I was the one who spoke about the new Sofirn Q8 first since I had talked about it a few months ago:

(BLF) Sofirn Q8 V1.5: The XPL HI monster, DIY parts + Extended 8x18650 tubes GB Interest List

So, we all love the BLF Q8 right? WE love modifying it, making it brighter, more customized, better, and cetera. First off, we have Sofirn which now sells the BLF Q8 MCPCB, the reflector, and the switch for anybody who wants to modify their light and easily swap parts, or make something completely, like a lantern https://www.aliexpress.com/item/BLF-Q8-Accessories-lighted-switch-assembly-Copper-DTP-MCPCB-Reflector-for-Q8/32879434650.html?spm=a2g0s.9042311.0.0.52b34c4dp3XU0f Second,…

I actually found out by accident that they would be making an updated version of the light by asking for a battery tube to be made available:

And no problem! I understand your concern for wanting a response from djozz. He is more knowledgeable than I am.

[RobertB]

@shirnask

Reuleaux?

Yes, with DNA 200 chipset

[JasonWW]

@FlashPilot

@BlueSwordM

The MCPCB is of course DTP. It would not make sense to not use a DTP MCPCB since the BLF Q8 features it already, and most lights already do. Therefore, the Sofirn Q8 will feature one of course.

AR lens? Depends on where they source it. Some AR lens are just bad in terms of tint, like in the prototype AR lens for the Q8, and the Kaidomain AR lens.

If they can get a similar one to the Kaidomain AR lens, that would be great.

NOT TRUE! Im not at all interested in your guesses and false assumptions. If you dont have definitive facts about the actual build specs for this light, then dont guess at the answers for someone extremely knowledgeable on the subject who will get them directly from the manufacturer.

The questions are for djozz and for the record, so I will kindly await his replies.

Geez. You can wait for a different person to answer without attacking those who are only trying to help. :person_facepalming:

[shirnask]

Thought it looked familiar

[T18]

Evolv Have a brand new DNA 200 in it’s box if anyone is interested in buying it, ha ha…

[vincebdx]

Hello, i’m interested for one by aliexpress.

Thanks!

[L4M4]

I’m In
Amazon DE

[teacher]

Please put me down for two (2).
Amazon USA

[ToyKeeper]

@pc_light

On further reflection, as much as the Q8 is a BLF classic. 4x18650 cells really are more battery than I want/need which is what has kept me from getting one up to now, it would just sit un-used.

Totally understandable. I don’t use my soda can lights much. They come in really handy sometimes as extra lighting for photography and video, and they’re nice as lanterns or candles due to the wide stable base and long runtime, but I don’t use them much for regular flashlight purposes.

However, that said, I use my Q8 quite a lot as a candle.

[warzi1975]

I’m in.

Robert

[gkushev]

Hello, I’m interested for one by aliexpress.

Thanks!