jmm244
(jmm244)
September 26, 2018, 1:29am
10
I tried to visit www.reylight.cn to get a better idea of what the different body and clip finish options looked like but the site has apparently been hacked.
Rey, if it’s going to take a while to get it up again, can you post some more pictures here?
When you say the head holds 9 or 15 trits, are there two different drilling patterns, or are they all drilled for 15 and some only loaded with 9?
Also, the internal BLF link to the driver info in post #4 above isn’t working for me.
ReyLight
(ReyLight)
September 26, 2018, 5:07am
11
Maybe we can find more driver info here .
ReyLight
(ReyLight)
September 26, 2018, 5:08am
12
Won’t happen again, haha, I will make a list.
ReyLight
(ReyLight)
September 26, 2018, 5:10am
14
SKV89:
Rey, I have several of your lights and I love them. The Ti Lan is absolutely my favorite AA light. I want to ask for this one, is the head mcpcb swappable with a noctigon triple mcpcb? Also do you plan on making copper version? I think for 18650, the heat might be a bit much for TI and copper would be perfect.
It is same size as noctigon triple mcpcb, 20mm dia. Copper version, not sure yet, might be a very future plan.
ReyLight
(ReyLight)
September 26, 2018, 5:14am
16
jmm244:
I tried to visit www.reylight.cn to get a better idea of what the different body and clip finish options looked like but the site has apparently been hacked.
Rey, if it’s going to take a while to get it up again, can you post some more pictures here?
When you say the head holds 9 or 15 trits, are there two different drilling patterns, or are they all drilled for 15 and some only loaded with 9?
Also, the internal BLF link to the driver info in post #4 above isn’t working for me.
Yes, I will post more pics.
15 trits, slots around head are drill more closely then the 9 trits.
post #4 link revised, thanks.
hatman
(hatman)
September 26, 2018, 6:09am
18
Is it possible to get one with a simple UI for those who don’t want to have to program their lights — low/medium/high, for example?
ReyLight
(ReyLight)
September 26, 2018, 6:40am
19
The UI default is 3 mode. LMH.
hatman
(hatman)
September 26, 2018, 6:50am
20
Thanks!
How about some photos that label which finish is which, please?
djozz
(djozz)
September 26, 2018, 1:22pm
22
yes it has thermal protection
jimmy_yang
(jimmy yang)
September 26, 2018, 1:29pm
23
If you can only pick two, in addition to machined, who should choose? :person_facepalming:
Looking forward to more data and detailed photos.
Agro
(Agro)
September 26, 2018, 3:00pm
26
I really like the extension instead of separate tubes. Looks very natural.
contactcr
(contactcr)
September 26, 2018, 4:10pm
27
Except for the added complexity of making them line up.
MascaratumB
(MascaratumB)
September 26, 2018, 4:23pm
28
The 18350 version is cute
Oldmototech
(Oldmototech)
September 26, 2018, 5:16pm
29
New to forum. New flashaholic. Electronics pro in the past. Love that new upcoming light in ti. Like the machines finnish.Getting one. Like to see the Damascus clips.Regards D.E.