Hi Ban, could you please check if it's possible to buy the driver only (see quote/link above)? Thank you!
10mm will be great! Now I can use your emitters for my AA and AAA lights. I hope you stock some quad mcpcb too!
^ :+1:
(not listed yetā¦)
Hi friends
KDLITKER 3535-10 DTP Copper MCPCB is available now.
KDLITKER 3535-10 DTP Copper MCPCB for Cree XP Series / Nichia 219 Series / 3535 LEDs ( 2 pcs )
Thank you
Ban
Checkout does not work, I got āInternal Server Errorā message in javascript alert box. Works now.
Hi friends
KDLITKER 3535-10 DTP Copper MCPCB is available now.
KDLITKER 3535-10 DTP Copper MCPCB for Cree XP Series / Nichia 219 Series / 3535 LEDs ( 2 pcs )
Thank you
Ban
cool :sunglasses:
A bit expensive but they are difficult to find elsewhere so that is fair enough from a sellerās point of view
Hi friends
KDLITKER 3535-10 DTP Copper MCPCB is available now.
KDLITKER 3535-10 DTP Copper MCPCB for Cree XP Series / Nichia 219 Series / 3535 LEDs ( 2 pcs )
Thank you
Ban
:+1: Too bad I already made a few big purchases from you already. Iāll wait for my next purchase to get these and woukd be great if you add these to the soldering options along with the 16mm, 20mm, and triple mcpcb. LHopefully you get some new emitters like more 95cri sst-20 with no green tint
Thanks Ban!
Order is placed (10mm boards are a bit expensive so i ordered a few less than initially planned but still happy to have the option to get them now from you!).
Two for $2.98 isnāt bad. Iāve added some to my cart for my next order.
Site seems to be down with (500) Internal server error.
Site seems to be down with (500) Internal server error.
That's what I'm seeing on my end as well.
Hi
I am doing some minor fixing.
Please try to go again.
Thank you
Ban
Lux-Perpetua:Hi Ban, Can you please tell me if thereās any chance to buy only the driver of the KDLITKER P6-TRI dropin? If not, do you know where to get the single driver or is it a special driver made by Kaidomain? http://kaidomain.com/Flashlight-DIY-and-Tools/led-drop-in/KDLITKER-P6-TRI-Cree-XP-E2-Triple-Color-P60-LED-Drop-in Thanks a lot! Cheers, Thomas
Hi Ban, could you please check if it's possible to buy the driver only (see quote/link above)? Thank you!
Hi Ban, sorry to bug you again but did you already have a chance to find something out or even offer for sale? Thank you!
Hi Lux
I am sorry that i forget to post the link.
I will post the link within 1 to 2 days.
Ban
Thank you Ban! :+1:
Hi Lux
I had posted the P60-TRI driver board on KD.
P2500 20mm 3V - 9V 2.8A 1 cell or 2 cells 5-Mode Driver Circuit Board for KDLITKER P6-TRI
P2500 is for parallel configuration
I3N is three led individual channel (3 negative shared). You need to have the LED PCB that is supported.
If you have any question, please feel free to contact me.
Thank you
Ban
I had not seen those separately operable triple P60ās yet, and with full choice for all 3 leds, pretty cool
Yeah, we had launched a new triple P60 drop-in in recent.
KDLITKER P6-TRI Cree XP-E2 Triple Color P60 LED Drop-in
And we get a BLF member to help to review on that.
The dropin was sent to me by Kaidomain for review. Here's the product's link: KDLITKER P6-TRI The product comes in a simple film canister. [image] The dropin is packaged in a resealable plastic bag. [image] The dropin is quite unique. It comes with an all brass construction and a triple TIR optic. The manufacturer allows the user to individually select the installed XP-E emitters (White / Neutral White / Warm White / Red / Green / Blue / Amber / Royal Blue). [image] Overaā¦
Enjoy
Thank you very much Ban! :-)
Can you please check the picture of this driver?
It says 2.8A max. Is that correct? So with 9V I could use 3x CR123?
Hi Lux
Sorry for careless mistake on the photo.
This driver board is designed for Cree XP-E2 led, the max . current is around 1500mA
I will correct it tonight.
Thank you
Ban