The BLF GT70 "Giggle Monster" is here! 7,500lumens, 1,500m throw! Group buy Closed!

[Texas_Ace]

Very impressive, they look like ready made marketing shots. :+1:

I added them to the OP if that is ok.

[Rockjunkie15]

@Texas_Ace

Very impressive, they look like ready made marketing shots. :+1:

I added them to the OP if that is ok.

Of course!

[teacher]

Great pictures Rockjunkie15!!! :+1:

All Photos by Rockjunkie15

BLF GT70 dedomed beamshots

Beam profile

1128 meter beamshot:

BLF GT70 (Left) vs Acebeam X65vn (Right)

….
Photos by Rockjunkie15

[cccpull]

Very nice beam shots, too bad there wasn't a BLF GT comparison. :THUMBS-UP:

[Far_Thrower]

@JasonWW

@Far Thrower

The switch wires could have been a bit longer as they have to be cut and soldered back in again.

Why didn’t the new switch fit through the switch hole? Was it thicker?

I could not get the switch to go though the hole from the inside, so I fitted it from the outside.

I found the switch wires too short to install the switch from the inside.

Was I missing something?

[the4ds9]

I am happy to report that my Lumintop BLF GT70 beam profile feels even brighter and tighter in hand. This is the best flashlight since the Olight SR90!

[Brainsick67]

@the4ds9

I am happy to report that my Lumintop BLF GT70 beam profile feels even brighter and tighter in hand. This is the best flashlight since the Olight SR90!

Thats great man, never had the SR90.

[JasonWW]

@Far Thrower

@JasonWW

@Far Thrower

The switch wires could have been a bit longer as they have to be cut and soldered back in again.

Why didn’t the new switch fit through the switch hole? Was it thicker?

I could not get the switch to go though the hole from the inside, so I fitted it from the outside.

I found the switch wires too short to install the switch from the inside.

Was I missing something?

I assumed people would not have to solder the switch wires.

[Pöbel]

Received my kit, installation went flawlessly, button went in without issues.

thanks a bunch, I now have to wait for darkness to compare with my GT

[JasonWW]

@Pöbel

Received my kit, installation went flawlessly, button went in without issues.

thanks a bunch, I now have to wait for darkness to compare with my GT

[teacher]

@Far Thrower

@JasonWW

@Far Thrower

The switch wires could have been a bit longer as they have to be cut and soldered back in again.

Why didn’t the new switch fit through the switch hole? Was it thicker?

I could not get the switch to go though the hole from the inside, so I fitted it from the outside.

I found the switch wires too short to install the switch from the inside.

Was I missing something?

Did your GT have the two slots ??

If so, you should have been able to turn the switch sideways & insert it from the inside without unsoldering the wires.
.

[JasonWW]

Here’s another pic.

.

[teacher]

Yours is a much better pic to show the ‘slots’ Jason. Thanks for posting it. . :+1:

[yclongthrow]

Anyone in the US receive their conversion kit yet? I ordered early September I believe.

[teacher]

Still waiting here.

[species8472]

Still waiting here, too.

It shouldn't be much longer though.

[the4ds9]

The World is Not Enough, but two Lumintop BLF GT70 is…
:heart_eyes: Johnny English Rules!

[yclongthrow]

@teacher

Still waiting here.

Ok. I’m in no rush, just had some issues with the website recording the wrong address initially so I was a little worried.

[teacher]

@yclongthrow

@teacher

Still waiting here.

Ok. I’m in no rush, just had some issues with the website recording the wrong address initially so I was a little worried.

:+1: … I don’t blame you, I’d be concerned too if I had problems with my address. Hopefully that got straightened out for you though and we will all start getting our Conversion Kits real soon. .

[Alkron]

Hello, new to forum, I realize I missed the group buy, I was just wondering if they happened regularly, or when another might be planned.