Hello my friends!
this is the discussion thread for the
LUMINTOP GT MICRO
the new member of the GT family
14500
Cree XP-L HI
groupbuy price $29.99 (start soon)
€dit got the
Specifications
Emitter: Cree XP-L High Intensity, neutral white or cold white, mounted on copper DTP MCPCB
Flux: ~1000 lm
Throw: ~400 m & ~50Kcd
Firmware: Tom E’s open-source GPL NarsilM v1.3 adapted by Texas_Ace
User interface:
[1] By default the GT micro is set to use the very intuitive Narsil smooth RAMPING UI. Instant access to a 2.5 A TURBO mode is also provided.
[2] A more conventional discrete level MODE-SET UI is available as an alternative. Any one of 12 predefined mode-sets can be selected.
[3] MOMENTARY mode is useful for signaling purposes or rapidly/briefly lighting up targets.
Battery: One 14500. Cell is not included.
Driver: Texas Avenger FET driver
Reflector: 29 mm ID, aluminum, smooth finish
Lens: Glass with anti-reflective coating
Body: Aluminum with Type III hard-coat anodizing
Button: Tactile with back-lit rubber boot
Ingress rating: Equivalent to IP65, do not immerse in liquids
Weight: Approximately 70g without cells
Dimensions: 36 mm Ø head x 105mm length
Link to the groupbuy: https://m4dm4x.com/lumintop-gt-micro-interest-list/
the Firmware is under open GPL - find it here:
http://pballandmore.com/Download/2019/NarsilMulti_1.3_Mini_GT.rar
Here is the manual for the GT micro. As I wrote it I had no numbers for lumens and throw. So the printed manual from Lumintop can differ on that and the logo, the rest should be the same. I hope that helps the first buyers https://drive.google.com/file/d/1gasmR8hXjyFKTRAYjOhWIn1zcnv_hWQ2/view?u... (2019-03-21)
already member of M4DM4X.com ?
the best deals are waiting for YOU!
BIG THANKS for helping me by using my REFLinks
before you buy elsewhere mail me: MARTIN@M4DM4X.COM - i will try to save you money!
already member of M4DM4X.com ?
the best deals are waiting for YOU!
BIG THANKS for helping me by using my REFLinks
before you buy elsewhere mail me: MARTIN@M4DM4X.COM - i will try to save you money!
Looks nice, but the X5 is nice too, I do not neccessarily need a e-side-switch for a light like this.
For me it depends on: is it direct drive on 14500, and low resistance like the X5, in other words, can I drive the KW CSLNM1.TG to 4.5A in this light with its driver? NiMh compatibility is a bonus, but however good the boost function is, it will destroy the throw capability of this light.
link to djozz tests
This seems to be the first AA/14500 light with NarsilM.
yup!
the preproduction samples are tested atm for real numbers
ready to order end of the year I think
already member of M4DM4X.com ?
the best deals are waiting for YOU!
BIG THANKS for helping me by using my REFLinks
before you buy elsewhere mail me: MARTIN@M4DM4X.COM - i will try to save you money!
Wow sweet! Interested! With a White Flat, it should throw as far as the Mini. Any idea what the mcpcb diameter is?
Looks great. How about Nano?
Or a midi with 21700 or 26650 and the head size of a Convoy L2 or L6
Reviews: Sofirn SP40, YLP Panda 3R and Unicorn, Armytek Prime C1 Pro, Acebeam M50, Imalent MS18, Convoy M3, Nitecore TIP2, Imalent RT70, Wuben T70, Sofirn SP32A, Thorfire VG15S, Thorfire VG10S, Thorfire TG06S
Mods: Astrolux MF01-20K, Small sun T08 MT-G2, Eagle eye X6 triple XPL, Ultrafire F13 MT-G2, Convoy C8 XHP70, Solarstorm T3 triple XP-L HI
Big flashlight measurement and beamshot collection
3D printing stuff for flashlights
My flashlight related Instagram
My Flashlight related Youtube channel called Zozzlights
My Patreon page to support my reviews and mods
Dang, Martin. Are you trying to ruin my abstinence?
I have fallen off the wagon so many times, I should get hazard pay.
No kidding. Did not like the GT Mini. I have tons of C8’s for that.
But in the field of 14500’s, my only thrower is the X5.
What is the size of the reflector/lens of this Micro?
You are a flashaholic if you are forced to come out of the closet, to make room for more flashlights.
At l(e)ast we got the guy who runs the GB for this, right, Martin?
Looks nice, I am in.
I think Lumintop are reserving the name BLF NANO for the AAA version that’s coming (you heard it first)
G'day mate, ow ya garn?
Yeah, nah good mate
I like AA light
Nico -.-
I haven’t heard about it. Just noticed that there’s a place for it. Maybe Lumintop will decide to go that route….or maybe not.
I would go for a Nano version
And I’m not sure I will be able to skip this one
I don’t have the GT, nor the GT Mini, so…I’ll have to see if this will have a nice throwing beam able to stand out comparing to the other lights I have! We’ll be looking for some beamshots Martin
[REVIEWS] AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 /// SOFIRN: SF14 + SP10A / SP32A / SP10B /// NITEFOX: UT20 / ES10K / K3 /// ODEPRO: KL52 / B108 /// ACEBEAM: H20 / TK16 /// BLITZWOLF: BW-ET1 /// DQG: AA Slim Ti /// HC-LIGHTS: SS AAA /// XTAR: PB2 Charger /// OLIGHT: M2R Warrior /// WUBEN: TO10R / E05 / T70 / E10 /// ON THE ROAD: M1 / i3 / M3 Pro /// ROVYVON: A2 + A5R / E300S / A8 /// KLARUS: XT1C /// LUMINTOP: Tool AA V2.0 + Tool 25 /// LIVARNOLUX: 314791 /// SKILHUNT: M150
Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 /// TIR Lenses: 1 / 2 /// Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 ///// My Collection ///// My Review's Blog (PT)
GIVEAWAY: 1
Think about Nano with a shorty tube.
Hum would it be smaller than an Emisar D1 with short tube? Slimmer, for sure!
I’m liking these ideas, I like small lights
[REVIEWS] AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 /// SOFIRN: SF14 + SP10A / SP32A / SP10B /// NITEFOX: UT20 / ES10K / K3 /// ODEPRO: KL52 / B108 /// ACEBEAM: H20 / TK16 /// BLITZWOLF: BW-ET1 /// DQG: AA Slim Ti /// HC-LIGHTS: SS AAA /// XTAR: PB2 Charger /// OLIGHT: M2R Warrior /// WUBEN: TO10R / E05 / T70 / E10 /// ON THE ROAD: M1 / i3 / M3 Pro /// ROVYVON: A2 + A5R / E300S / A8 /// KLARUS: XT1C /// LUMINTOP: Tool AA V2.0 + Tool 25 /// LIVARNOLUX: 314791 /// SKILHUNT: M150
Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 /// TIR Lenses: 1 / 2 /// Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 ///// My Collection ///// My Review's Blog (PT)
GIVEAWAY: 1
That one looks good!
Interested!
definitely interested!
Oh did I mention ….it’s a yes from me
It’s too cute not to be interested in
G'day mate, ow ya garn?
Yeah, nah good mate
I’m keen for one of these,
Would also like a nano version if that ever eventuates
Do you know the Dimensions?
I’d rather see BLF Jr. with two 3 cell carriers & a reflector about 3/4 the size of the original. That would be a much handier beast.
lenght 10.6cm
I’m pretty excited about this light, but I’m unreasonably excited about that driver…
Find all my reviews of flashlights and more gear at www.bmengineer.com
Sorry GT micro. I stay with Emisar D1 as pocket thrower with 10,5mm length. I think the head is also nearly the same size but the 18650 capacity completely win this.
Reviews: Sofirn SP40, YLP Panda 3R and Unicorn, Armytek Prime C1 Pro, Acebeam M50, Imalent MS18, Convoy M3, Nitecore TIP2, Imalent RT70, Wuben T70, Sofirn SP32A, Thorfire VG15S, Thorfire VG10S, Thorfire TG06S
Mods: Astrolux MF01-20K, Small sun T08 MT-G2, Eagle eye X6 triple XPL, Ultrafire F13 MT-G2, Convoy C8 XHP70, Solarstorm T3 triple XP-L HI
Big flashlight measurement and beamshot collection
3D printing stuff for flashlights
My flashlight related Instagram
My Flashlight related Youtube channel called Zozzlights
My Patreon page to support my reviews and mods
I’m in!
It’s awesome short by awesome thin! I’m in!
Nokoff..still Made in China 山寨主義
I'm in
link to djozz tests
This is what I was thinking.
Having the 14500 capability to make the body smaller is great and all but you still need a semi thrower head.
Ill be curious to see if the candela ratings beat out the D1 because the D1 is a very, VERY good form factor with a very simple to understand UI.
I really like it!
Looking forward to the opportunity to buy.
lennarta
Pages