I’m not particularly knowledgeable but do we know the exact tint and colour temps for the various led’s that will be offered?
Is there two xpl-hi options and two Samsung options? Some of the comments seem to suggest there is 4K and 5k xpl’s and the same for the Samsung’s? Excuse my ignorance if i’m miss understanding the comments.
Thanks
People are just saying what they would like. I don’t think there have been any official tints confirmed. If I had to guess, it would be 4000K LH351D and 5000K xpl-hi.
We are still waiting for ToyKeeper to confirm what the choices are.
Is the XP-L HI going to be ‘at least 5000K’ (or a bit more??)
See first page, poll’s results = XP-L HI 3D means between 4750-5000K if i’m not wrong, LH351D 4000K.
Maybe this will change if a better tint is found that doesn’t match the poll’s end results.
I dont want to wait , I dont want coold low cri led too , on the other hand I doubt that Samsung will make good tint. current T7 shuld be below BBL but it 4step above. I actualy dont care about tint, I just want neutral Hicri. )
The sooner I get host, the sooner I could change LEDs) So variant #3.
People are just saying what they would like. I don’t think there have been any official tints confirmed. If I had to guess, it would be 4000K LH351D and 5000K xpl-hi.
We are still waiting for ToyKeeper to confirm what the choices are.
I think TK is just adept at throwing decoys to keep the peace while we are all waiting. She’s ahead of the game. Thanks for keeping us entertained TK
The plan for the surface finish is a dark grey anodized aluminum. After three tries to do a clear-anodized finish, it still didn’t work out, so the plan is to do a classy dark grey which is both easier and more durable.
The plan for the surface finish is a dark grey anodized aluminum. After three tries to do a clear-anodized finish, it still didn’t work out, so the plan is to do a classy dark grey which is both easier and more durable.
Thanks for the info TK…..
—
You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant
.................................. "Slow is Smooth, Smooth is Fast" ...................................
The plan for the surface finish is a dark grey anodized aluminum. After three tries to do a clear-anodized finish, it still didn’t work out, so the plan is to do a classy dark grey which is both easier and more durable.
Thanks for the update. Im gravitating more towards warmer emitters, but both of those options sound perfect. Unfortunate that clear ano didnt work out, but grey will be good too.
I think if LH351D is causing delays then they should release XPL-HI SKU now (or whenever practical). LH351D SKU can be released later when tint issues are resolved.
I’m defo decided for LH351D then, not interested in 3D tint
So I egotistically should vote for option 2 as releasing XP-L version will most likely delay one with Samsung emiter but I’m not that egoist
So you keep repeating over and over and over.
It’s tiresome and I’m pretty sure the volunteers who stepped in to take over this project don’t appreciate the little jabs and constant reminders.
So you keep repeating over and over and over.
It’s tiresome and I’m pretty sure the volunteers who stepped in to take over this project don’t appreciate the little jabs and constant reminders.
Better forget mate, it’s just another one to the list…
Fortunately other people come here to say positive stuff and to keep us breathing while waiting!
The plan for the surface finish is a dark grey anodized aluminum. After three tries to do a clear-anodized finish, it still didn’t work out, so the plan is to do a classy dark grey which is both easier and more durable.
Aww… That’s a shame.
“Didn’t work”?
That’s strange.
Lemme join the band:
Make the XP-L HI model now, and do the LH351D lights later.
Review: Armytek Prime C2 (USB magnetic)
That’s my choice
I’m not particularly knowledgeable but do we know the exact tint and colour temps for the various led’s that will be offered?
Is there two xpl-hi options and two Samsung options? Some of the comments seem to suggest there is 4K and 5k xpl’s and the same for the Samsung’s? Excuse my ignorance if i’m miss understanding the comments.
Thanks
People are just saying what they would like. I don’t think there have been any official tints confirmed. If I had to guess, it would be 4000K LH351D and 5000K xpl-hi.
We are still waiting for ToyKeeper to confirm what the choices are.
KSGER STM32 2.1S Soldering Station Videos - Review Soon
Convoy L6 thread XHP70.2, TA FET driver, lighted side switch. - Supfire L5-S thread XHP70.2, TA FET driver, lighted side switch. Mini L6! - Thorfire S70S MTN FET driver, custom lighted side switch. - 10 NarsilM user videos for BLF Q8, GT, GT70, GT Mini, GT Micro, Astrolux S43(S) and ROT66
Texas_Ace BLF Calibrated Lumen tube and Maukka Calibration Lights for DIY Lumen Measuring Devices - List of Actively Cooled Lights - Headlight List with prices, specs and features - Jaxmnve M1 Stainless 10180 Keychain light Review - Lumintop ODF30 Review - Sofirn C8F 21700 Teardown and Review, Sofirn SP33 v2 XHP50.2 Review - My Sofirn Q8 Results - Astrolux S43S 219C Test Results - Lumintop GT Mini Test Results - Lumintop GT Micro Test Results
See first page, poll’s results = XP-L HI 3D means between 4750-5000K if i’m not wrong, LH351D 4000K.
Maybe this will change if a better tint is found that doesn’t match the poll’s end results.
I dont want to wait , I dont want coold low cri led too , on the other hand I doubt that Samsung will make good tint. current T7 shuld be below BBL but it 4step above. I actualy dont care about tint, I just want neutral Hicri. )
The sooner I get host, the sooner I could change LEDs) So variant #3.
I think TK is just adept at throwing decoys to keep the peace while we are all waiting. She’s ahead of the game. Thanks for keeping us entertained TK
UF2100 Makeover -- Ti-mo -- 6th O-L comp entry -- Titanium Build -- Hunting Light -- 21700 Tube Light -- Stripey mtg2 Light -- UV Light -- Colour V4A Light -- Copper 26650 Light -- Quad xhp35 Light -- Finger Sizzler -- Mechanical Mod Light
To clarify, the plan for emitters is two choices:
The plan for the surface finish is a dark grey anodized aluminum. After three tries to do a clear-anodized finish, it still didn’t work out, so the plan is to do a classy dark grey which is both easier and more durable.
Nice!
You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant
.................................. "Slow is Smooth, Smooth is Fast" ...................................
Texas Lumens Flashlights / M4D M4X Deals : sign up - save $$$$
Rudeness Level _ mΩ _ {width:70%} _ LightWiki _ LED Tint Chart
Xlamp size chart _ BatteryU _ Flashaholic? Need Professional Help??? TheOriginal _ TAB _ LightSearch _ BatterySearch _ 14500's _ DiCal
Thanks for the update. Im gravitating more towards warmer emitters, but both of those options sound perfect. Unfortunate that clear ano didnt work out, but grey will be good too.
Purrrrrrrfect!
I always think long and hard before I say something really stupid.
Based on TK’s confirmation it’s XP-L for me and make them ASAP
I think if LH351D is causing delays then they should release XPL-HI SKU now (or whenever practical). LH351D SKU can be released later when tint issues are resolved.
I’m in no hurry, so options 2 and 3 are both fine to me. However, does the wait even guarantee availability of the more appealing bins?
I’m defo decided for LH351D then, not interested in 3D tint
So I egotistically should vote for option 2 as releasing XP-L version will most likely delay one with Samsung emiter but I’m not that egoist
I think the lead time to get the LH351D in a rosy bin from a supplier is what requires a delay.
Ceilingbounce – flashlight testing and runtime graphs for Android
Please go for the XP-L HI lights now. It's what I am interested in anyway. Thanks.
Please add me to the list for one of these. Thnx.
This is what I am in for, take your time for the best tint. I have one or two other lights to tide me over until then.
I agree. I doubt any of us are stuck in the dark. Be patient and get it right the first time.
The higher the quality, the more it’s worth waiting for and the more pleasing it will be when it arrives. Besides, the anticipation is half the fun.
I am interested in 1, please.
Thanks for all the work on the light and GB to all involved
Please add me for 1x of option 2 ‘LH351D 4000K 90CRI (ideally T1/T2/T3/T4 bin)’. Let’s wait for the real deal.
I vote option 2. We’ve already waited this long. Let’s get it right source some confirmed good, below black body line, hi cri Rosy goodness.
Hasn’t been THAT long, only a year and a half
So you keep repeating over and over and over.
It’s tiresome and I’m pretty sure the volunteers who stepped in to take over this project don’t appreciate the little jabs and constant reminders.
KSGER STM32 2.1S Soldering Station Videos - Review Soon
Convoy L6 thread XHP70.2, TA FET driver, lighted side switch. - Supfire L5-S thread XHP70.2, TA FET driver, lighted side switch. Mini L6! - Thorfire S70S MTN FET driver, custom lighted side switch. - 10 NarsilM user videos for BLF Q8, GT, GT70, GT Mini, GT Micro, Astrolux S43(S) and ROT66
Texas_Ace BLF Calibrated Lumen tube and Maukka Calibration Lights for DIY Lumen Measuring Devices - List of Actively Cooled Lights - Headlight List with prices, specs and features - Jaxmnve M1 Stainless 10180 Keychain light Review - Lumintop ODF30 Review - Sofirn C8F 21700 Teardown and Review, Sofirn SP33 v2 XHP50.2 Review - My Sofirn Q8 Results - Astrolux S43S 219C Test Results - Lumintop GT Mini Test Results - Lumintop GT Micro Test Results
Better forget mate, it’s just another one to the list…
Fortunately other people come here to say positive stuff and to keep us breathing while waiting!
REVIEWS: AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 /// SOFIRN: SF14 & SP10A / SP32A / SP10B /// NITEFOX: UT20 / ES10K / K3 /// ODEPRO: KL52 / B018 /// ACEBEAM: H20 /// BLITZWOLF: BlitzWolf BW-ET1 /// DQG: AA Slim Ti /// HC-LIGHTS: SS AAA /// XTAR: PB2 Charger /// OLIGHT: M2R Warrior /// WUBEN: TO10R / E05 / T70 /// ON THE ROAD: M1 / i3 / M3 Pro /// ROVYVON: A2 & A5R / E300S / A8 /// KLARUS: XT1C
Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 TIR Lenses: 1 / 2 Others: Biscotti 3 & 1*7135 Triple TIR & XP-G2
MY GIVEAWAY (FW3A)
Please add me to the interest list for 1 light.
A bit late to the party but i really appreciate all of your works to design the most perfect light. Thank you in advance.
XPLHI is good for me , I couldn’t careless about the other LEDs , lol.
Aww… That’s a shame.
“Didn’t work”?
That’s strange.
2Q19
Pages