FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public

13397 posts / 0 new
Last post
Umpi2000
Offline
Last seen: 8 hours 44 min ago
Joined: 03/15/2017 - 08:06
Posts: 261
Location: Durban, South Africa

I’m not particularly knowledgeable but do we know the exact tint and colour temps for the various led’s that will be offered?
Is there two xpl-hi options and two Samsung options? Some of the comments seem to suggest there is 4K and 5k xpl’s and the same for the Samsung’s? Excuse my ignorance if i’m miss understanding the comments.
Thanks

JasonWW
JasonWW's picture
Offline
Last seen: 2 hours 54 min ago
Joined: 10/22/2016 - 11:41
Posts: 11346
Location: Houston Texas

People are just saying what they would like. I don’t think there have been any official tints confirmed. If I had to guess, it would be 4000K LH351D and 5000K xpl-hi.

We are still waiting for ToyKeeper to confirm what the choices are.

Tally-ho
Tally-ho's picture
Offline
Last seen: 2 hours 56 min ago
Joined: 07/23/2011 - 04:15
Posts: 1250
Location: France

teacher wrote:

  • Is the XP-L HI going to be ‘at least 5000K’ (or a bit more??)

See first page, poll’s results = XP-L HI 3D means between 4750-5000K if i’m not wrong, LH351D 4000K.
Maybe this will change if a better tint is found that doesn’t match the poll’s end results.
AEDe
AEDe's picture
Offline
Last seen: 3 hours 47 min ago
Joined: 12/01/2016 - 12:07
Posts: 527
Location: Moscow

I dont want to wait , I dont want coold low cri led too , on the other hand I doubt that Samsung will make good tint. current T7 shuld be below BBL but it 4step above. I actualy dont care about tint, I just want neutral Hicri. )

The sooner I get host, the sooner I could change LEDs) So variant #3.

pinkpanda3310
pinkpanda3310's picture
Offline
Last seen: 12 hours 43 min ago
Joined: 12/28/2013 - 08:45
Posts: 2088
Location: Perth

JasonWW wrote:
People are just saying what they would like. I don’t think there have been any official tints confirmed. If I had to guess, it would be 4000K LH351D and 5000K xpl-hi.

We are still waiting for ToyKeeper to confirm what the choices are.


I think TK is just adept at throwing decoys to keep the peace while we are all waiting. She’s ahead of the game. Thanks for keeping us entertained TK Beer
ToyKeeper
ToyKeeper's picture
Offline
Last seen: 5 hours 50 min ago
Joined: 01/12/2013 - 14:40
Posts: 9811
Location: (469219) 2016 HO3

To clarify, the plan for emitters is two choices:

  • XP-L HI 3D V3 70CRI (~4875K)
  • LH351D 4000K 90CRI (ideally T1/T2/T3/T4 bin)

The plan for the surface finish is a dark grey anodized aluminum. After three tries to do a clear-anodized finish, it still didn’t work out, so the plan is to do a classy dark grey which is both easier and more durable.

Geuzzz
Geuzzz's picture
Offline
Last seen: 49 min 21 sec ago
Joined: 10/25/2015 - 10:27
Posts: 1069
Location: Netherlands
ToyKeeper wrote:
so the plan is to do a classy dark grey which is both easier and more durable.

Nice!

teacher
teacher's picture
Offline
Last seen: 1 month 2 weeks ago
Joined: 02/23/2016 - 19:04
Posts: 9596
Location: NE & SW Alabama

ToyKeeper wrote:
To clarify, the plan for emitters is two choices:
  • XP-L HI 3D V3 70CRI (~4875K)
  • LH351D 4000K 90CRI (ideally T1/T2/T3/T4 bin)

The plan for the surface finish is a dark grey anodized aluminum. After three tries to do a clear-anodized finish, it still didn’t work out, so the plan is to do a classy dark grey which is both easier and more durable.

Thanks for the info TK….. Thumbs Up

You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant 

 .................................. "Slow is Smooth, Smooth is Fast" ...................................

       Texas Lumens Flashlights / M4D M4X Deals : sign up - save $$$$  

         Rudeness Level _ mΩ _ {width:70%} _ LightWiki _ LED Tint Chart  

      Xlamp size chart _ BatteryU _ Flashaholic? Need Professional Help???            TheOriginal _ TAB _ LightSearch _ BatterySearch _ 14500's _ DiCal 

 

                                             

nick779
nick779's picture
Offline
Last seen: 4 days 18 hours ago
Joined: 03/09/2018 - 15:46
Posts: 300
Location: Pittsburgh, PA

ToyKeeper wrote:
To clarify, the plan for emitters is two choices:
  • XP-L HI 3D V3 70CRI (~4875K)
  • LH351D 4000K 90CRI (ideally T1/T2/T3/T4 bin)

The plan for the surface finish is a dark grey anodized aluminum. After three tries to do a clear-anodized finish, it still didn’t work out, so the plan is to do a classy dark grey which is both easier and more durable.

Thanks for the update. Im gravitating more towards warmer emitters, but both of those options sound perfect. Unfortunate that clear ano didnt work out, but grey will be good too.

Henk4U2
Henk4U2's picture
Online
Last seen: 1 min 35 sec ago
Joined: 02/13/2014 - 17:52
Posts: 2831
Location: The heart of the Netherlands (GMT+1)
Geuzzz wrote:
ToyKeeper wrote:
so the plan is to do a classy dark grey which is both easier and more durable.

Nice!

Purrrrrrrfect!

You are a flashaholic if you are forced to come out of the closet, to make room for more flashlights.

Umpi2000
Offline
Last seen: 8 hours 44 min ago
Joined: 03/15/2017 - 08:06
Posts: 261
Location: Durban, South Africa

Based on TK’s confirmation it’s XP-L for me and make them ASAP Evil

varbos
Offline
Last seen: 2 hours 21 min ago
Joined: 02/16/2017 - 07:36
Posts: 419
Location: Europe

I think if LH351D is causing delays then they should release XPL-HI SKU now (or whenever practical). LH351D SKU can be released later when tint issues are resolved.

iamlucky13
Offline
Last seen: 7 hours 33 min ago
Joined: 06/22/2018 - 09:18
Posts: 561
Location: USA

I’m in no hurry, so options 2 and 3 are both fine to me. However, does the wait even guarantee availability of the more appealing bins?

ToyKeeper wrote:
To clarify, the plan for emitters is two choices:
  • XP-L HI 3D V3 70CRI (~4875K)
  • LH351D 4000K 90CRI (ideally T1/T2/T3/T4 bin)
P33
Offline
Last seen: 3 months 1 week ago
Joined: 09/25/2018 - 16:41
Posts: 249
Location: Kraków, Poland

I’m defo decided for LH351D then, not interested in 3D tint Smile
So I egotistically should vote for option 2 as releasing XP-L version will most likely delay one with Samsung emiter but I’m not that egoist Smile

zak.wilson
Offline
Last seen: 9 hours 23 min ago
Joined: 09/29/2014 - 14:27
Posts: 827

I think the lead time to get the LH351D in a rosy bin from a supplier is what requires a delay.

Ceilingbounce – flashlight testing and runtime graphs for Android

ActiveAl
ActiveAl's picture
Offline
Last seen: 4 hours 58 min ago
Joined: 03/27/2018 - 03:14
Posts: 515
Location: Central Florida

Please go for the XP-L HI lights now. It's what I am interested in anyway. Thanks. 

Steeldog
Offline
Last seen: 1 month 2 weeks ago
Joined: 09/20/2018 - 15:00
Posts: 62
Location: California

Please add me to the list for one of these. Thnx.

Tech25
Offline
Last seen: 2 days 18 hours ago
Joined: 07/29/2018 - 22:37
Posts: 33
Location: NY

ToyKeeper wrote:

  • LH351D 4000K 90CRI (ideally T1/T2/T3/T4 bin)

This is what I am in for, take your time for the best tint. I have one or two other lights to tide me over until then.

Tumbleweed48
Offline
Last seen: 17 hours 56 min ago
Joined: 11/12/2012 - 23:21
Posts: 739
Location: Canada

I agree. I doubt any of us are stuck in the dark. Be patient and get it right the first time.

The higher the quality, the more it’s worth waiting for and the more pleasing it will be when it arrives. Besides, the anticipation is half the fun.

pinecone
pinecone's picture
Offline
Last seen: 7 months 3 weeks ago
Joined: 11/06/2018 - 05:23
Posts: 96
Location: United States

I am interested in 1, please.

Thanks for all the work on the light and GB to all involved Thumbs Up

hyperduc
Offline
Last seen: 2 months 6 days ago
Joined: 03/02/2018 - 00:34
Posts: 31
Location: United States

Please add me for 1x of option 2 ‘LH351D 4000K 90CRI (ideally T1/T2/T3/T4 bin)’. Let’s wait for the real deal.

electricjelly
electricjelly's picture
Offline
Last seen: 9 hours 53 min ago
Joined: 08/23/2012 - 03:39
Posts: 533
Location: Los Angeles

I vote option 2. We’ve already waited this long. Let’s get it right source some confirmed good, below black body line, hi cri Rosy goodness.

lionheart_2281
lionheart_2281's picture
Offline
Last seen: 1 hour 58 min ago
Joined: 10/25/2012 - 18:32
Posts: 2942
Location: Brisbane, Australia
electricjelly wrote:
I vote option 2. We’ve already waited this long. Let’s get it right source some confirmed good, below black body line, hi cri Rosy goodness.

Hasn’t been THAT long, only a year and a half

JasonWW
JasonWW's picture
Offline
Last seen: 2 hours 54 min ago
Joined: 10/22/2016 - 11:41
Posts: 11346
Location: Houston Texas

lionheart_2281 wrote:

Hasn’t been THAT long, only a year and a half

So you keep repeating over and over and over.
It’s tiresome and I’m pretty sure the volunteers who stepped in to take over this project don’t appreciate the little jabs and constant reminders.
MascaratumB
MascaratumB's picture
Offline
Last seen: 50 min 41 sec ago
Joined: 10/29/2016 - 12:12
Posts: 4014
Location: Portugal

JasonWW wrote:
lionheart_2281 wrote:

Hasn’t been THAT long, only a year and a half

So you keep repeating over and over and over.
It’s tiresome and I’m pretty sure the volunteers who stepped in to take over this project don’t appreciate the little jabs and constant reminders.

Better forget mate, it’s just another one to the list… Facepalm
Fortunately other people come here to say positive stuff and to keep us breathing while waiting! :ARROW-RIGHT:

[REVIEWS] AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 /// SOFIRN: SF14 + SP10A / SP32A / SP10B /// NITEFOX: UT20 / ES10K / K3 /// ODEPRO: KL52 / B108 /// ACEBEAM: H20 / TK16 /// BLITZWOLF: BW-ET1 /// DQG: AA Slim Ti /// HC-LIGHTS: SS AAA /// XTAR: PB2 Charger /// OLIGHT: M2R Warrior /// WUBEN: TO10R / E05 / T70 / E10 /// ON THE ROAD: M1 / i3 / M3 Pro /// ROVYVON: A2 + A5R / E300S / A8 /// KLARUS: XT1C /// LUMINTOP: Tool AA V2.0 + Tool 25 /// LIVARNOLUX: 314791 /// SKILHUNT: M150

Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 /// TIR Lenses: 1 / 2 /// Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 ///// My Collection ///// My Review's Blog (PT)

GIVEAWAY: 1

mk23
Offline
Last seen: 7 hours 9 min ago
Joined: 12/24/2017 - 23:37
Posts: 59

Please add me to the interest list for 1 light.

A bit late to the party but i really appreciate all of your works to design the most perfect light. Thank you in advance.

Nev
Offline
Last seen: 1 month 2 weeks ago
Joined: 04/06/2017 - 07:50
Posts: 1013
Location: U.K.

XPLHI is good for me , I couldn’t careless about the other LEDs , lol.

Jerommel
Jerommel's picture
Offline
Last seen: 3 months 2 weeks ago
Joined: 01/04/2014 - 13:18
Posts: 5721
Location: the Hague, Netherlands

ToyKeeper wrote:

The plan for the surface finish is a dark grey anodized aluminum. After three tries to do a clear-anodized finish, it still didn’t work out, so the plan is to do a classy dark grey which is both easier and more durable.


Aww… That’s a shame.
“Didn’t work”?
That’s strange.

2Q19

BlueSwordM
BlueSwordM's picture
Offline
Last seen: 38 min 11 sec ago
Joined: 11/29/2017 - 12:34
Posts: 5208
Location: Canada

I asked Digikey.

They said stocking a favorable tint bin will take quite a long lead time, as always.

My very own high current Beryllium Copper springs Gen 3:
http://budgetlightforum.com/node/67401
Liitokala Aliexpress Stores Battery Fraud: http://budgetlightforum.com/node/60547

Tixx
Online
Last seen: 6 min 35 sec ago
Joined: 08/27/2015 - 22:34
Posts: 278
Location: United States

SKV89 wrote:
I don’t mind either Option 2 or 3 but definitely not Option 1.

Please do not use any of the LH351D currently available in the FW3A. They are all too green. The groupbuys were T6 and T7 bins that were supposed to be at or below the BBL but in reality, they are all much above the BBL resulting in the yellow or green tint as shown in the Bob McBob’s comparison TK posted earlier. Please note that the few E21A 4000k flashlights I have don’t look anywhere that rosy and the LH351D is even more green than in the pics. Really hope Neal can source T1, T2, T3, T4 bin. I don’t mind waiting. I rather have perfect emitters to begin with so no need to mod.

Another option besides the Samsungs are the Luminus SST-20-W 95CRI. The 4000k sold on Kaidomain is the FB4 bin, which is far above the BBL. Fireflies is using the FA3 bin in the ROT66 and that was reported to have some slight green and requires minus green filter to perfect. If Neal can source the FA1, FA4, FD1, FD4, it should give the Nichia 9080 appearance but with better performance vs 219B.
!https://i.imgur.com/N5l6UJd.png?1!

I like the above, but from the 3 choices, mine is – Make the XP-L HI model now, and do the LH351D lights later.

Pages