FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public

irony is hard to master, especially for me, I guess. :weary:

The price will be quoted when it is quoted. :wink:

Joking aside, my experience is large suppliers like this can usually provide quotes on items they deal with regularly in hours to a day or two during their regular hours, and if they have to work directly with a manufacturer on a special order of something that requires a little bit of special effort, it’s usually not more than a week.

Thanks ToyKeeper for the detailed response.

Being that its a Linear + Fet Driver, it should be more efficient with a high Vf LED correct?
The LH351D has a higher Vf than your typical Nichia so it shouldn’t heat up as much right at an equivalent output right?

Last but not least, does this light have a mechanical switch or an electronic switch?

It is e-switch only. A mechanical switch would not allow for ramping (not easily anyway) and would take up much more space.


.

If you define efficiency by led-watts/input-watts then a higher Vf would be better. However I would argue that the most important efficiency is lumens/watt-input and in that scenario you want the LED with the most lumens/amp where the VF doesn’t matter as long as it’s low enough for the circuit to work.

I’m looking for a dark grey light, so please add me to the list for one.

Definetily interested for one, please.

Thanks all for the answers to my questions.
Love the fact that its a 3 channel light for better efficiency and regulation.

Looking forward to see the final version come to life.

Well, instead of waiting around or moaning about the FW3A's production I had to get creative and make my own version ;)CRX SR4-T

Copper, Brass & Titanium construction
Quad Nichia 219C 5000K emitters
20mm Copper DTP MCPCB
20mm x 7mm solid copper heatsink
22mm x 2mm dual coated ARC glass
Emisar D4v2 ramping driver
Copper & glass tritium momentary tail switch
Lockout-able
Magnetic cell contacts
56, 2mm x 2mm magnets in tail
18650 cell compatible

Length – 97mm
Width – 25mm
Weight – 185g (with 18650 cell)

I could have shaved another few millimetres off the length of the light but wanted a decently thick copper heatsink, magnetic tail and tritium vial in the momemtary switch button, still managed to keep it below 100mm.

It is not 100% finished yet but near enough.

Size comparison:

This is cruel CRX :stuck_out_tongue:

You could start mass production, the model is functional, the tint is good and it has the looks we need :smiling_imp:

Nobody would want to pay the price though :money_mouth_face:
Funny thing is, this one only took me a day to make.

Took him a day to make. I don’t think he’s completely human. :laughing: :open_mouth:

CRX, beautiful! Do you ever sell your lights? How much would this one go for?

I want one! +1

Oh no, I think he’s onto me :smiley:

This one’s a keeper, I never know how to price these things, by the hour + materials?
My time varies between £30-£50 an hr for work so if I said £30 x 12 = £360 + £40 + a niche skill set & unqiue item?….

I can’t speak for CRX, but it would have to be expensive, both parts and labor wise.

Beautiful!

Edit: beat me to the post.

Would like to purchase when available.

That’s really nice. It may even be closer to the original spirit of the FW3A than the real thing. I’m curious though… did you flash the driver or use it stock? There are builds of Anduril for that driver if you want one.

Thanks. I used what I had on hand - a stock Emisar D4 driver with the switchwire connected to a brass ring sitting on the spring side, insulated of course.

Interested in 1. Thanks.