FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public

Thanks. I used what I had on hand - a stock Emisar D4 driver with the switchwire connected to a brass ring sitting on the spring side, insulated of course.

Interested in 1. Thanks.

We were hoping you’d do it pro bono. You know……for BLF members…….in your spare time. :smiling_imp: :smiley:

Interested in 1 when available :slight_smile:

No clue how I overlooked the FW3A being a 3 channel, 1+7+FET driver. That just sweetens the deal.

Deep from the abyss, now comes this photo of the FW3A with the Emisar in the center.

Note: It’s not the final ‘tint’ of the anodisation yet, still in ‘Host’ form (more greenish than grey), but at least you’ll believe this project is on track and it’s coming our way sooner than later:

Edit: The photo might not be a final representation of what will become the production version.

It’s more for the purpose of showing that this project is very-much alive and hopefully bring hope to those fellow members who are losing enthusiasm because of the looong wait.

What are the extra ribs cut in it under the head?

Are the ends not screwed down?

At the moment I only have the photo, so please bear me my friend. If I answer your question, it will only be speculative so I am not qualified to answer in a responsible manner haha.

No major host shape changes have been approved, so I hope that’s just unscrewed and missing the clip and O-rings.

I also think it’d be nice if the people involved in the project didn’t have to get news from forwarded social media posts. It’s a bit frustrating.

Yeah, better to iron out all discrepancies before full-blown production commences.

I have no trouble being speculative :slight_smile: : it looks to me that both head and tail are not screwed down and that you can see o-ring grooves and maybe how the inner tube is sitting in the shell (how exactly that fits in I can not figure out.

There might not be any host changes. It’s looks pretty much exactly like it’s supposed to.

It’s just the ends being unscrewed that make it look different.

You are most probably correct in that observation.

With the parts unscrewed to the point of being completely loose, it can be made to look similar to the photo. I don’t know how the parts are being held in position though, since gravity makes it fall together a bit more than that in the prototypes.

They are laying flat on their sides.

You are correct, sir. And I think I should go get some sleep.

Maybe… but the tailcaps look like they are sitting/standing on the green to me.

Great color as is. I like the slight green in there.

DAYUM! That looks sexy!

I’m thinking of bead blasting one of mine or stripping it and polishing it .

I really want Toykeepers prototype