Fenix have sent me a 1000 lumen PD35 V2.0 for review, I’ve measured it on my lightbox at 1018 lumens ANSI with Samsung 30Q and 1088 lumens ANSI with Ampsplus Q30.
It would have measured 600-800 on my TA tube. As all my lights measuring circa 1000 on the KG-Lightbox measured 600-800 on the Texas_Ace Calibrating tube. In fact nearly all of my 100+ lights read 20% lower on the TA tube so it’s not hard to surmise what the ballpark measurement would have been.
You can’t say that since you do not have a TA tube to test it on and everyone else that tested such lights had them read correctly. You are giving pure conjecture.
Lets let the dead horse be dead. :person_facepalming:
My TA tube had been reading very accurately. My ROT66 219B measurements has been very close to what Maukka and others measure. My TK01 measures exactly the same as Mateminco specs, which is exactly 2,215 lumens on turbo.
Maukka got multiple readings from the ROT66 219B after I pointed out an anomaly to him. I get a similar anomaly with my convoy S2+ lights and thats that’s why I won’t order one off him.
Finally received my calibration lights after 12 weeks in the post. I’m sure it was misplaced as the light boxes were completely soaked and the shipping label was barely visible. Amazing it actually arrived.
Just want to thank TA for an excellent job on my Lumen Tube. Tested it against Maukka’s lights and it was only 8 lumens too high. Used another small strip of tape and it’s within 1-2 lumens on both lights. Not going to bother getting it closer.