Yep… extremely “Ridiculous”.
One would have to either be a true moron… OR …work very hard to be that “ridiculous”…… as far as I am concerned anyway.
In this case I have no earthly idea which is the case??
Yep… extremely “Ridiculous”.
One would have to either be a true moron… OR …work very hard to be that “ridiculous”…… as far as I am concerned anyway.
In this case I have no earthly idea which is the case??
My TA tube had been reading very accurately. My ROT66 219B measurements has been very close to what Maukka and others measure. My TK01 measures exactly the same as Mateminco specs, which is exactly 2,215 lumens on turbo.
Fenix have sent me a 1000 lumen PD35 V2.0 for review, I’ve measured it on my lightbox at 1018 lumens ANSI with Samsung 30Q and 1088 lumens ANSI with Ampsplus Q30.
It would have measured 600-800 on my TA tube.
What a meaningless and unfounded post. “It would have……”.
Prove it, don’t guess.
If you can’t prove it, why even say it? The only reason I can think of is just to stir up negativity. In other words “Trolling”.
In Internet slang, a troll (/troʊl, trɒl/) is a person who starts quarrels or upsets people on the Internet to distract and sow discord by posting inflammatory and digressive,[1]extraneous, or off-topic messages in an online community (such as a newsgroup, forum, chat room, or blog) with the intent of provoking readers into displaying emotional responses[2] and normalizing tangential discussion,[3] whether for the troll’s amusement or a specific gain.
I’ve got a handful of LED shaped Valium tablets I’m gonaa sprinkle liberally on this thread LOL!
So much to learn about, it’ll make you wanna shout…
Eldon Hoke is rolling over in his grave right about now.
Congrat’s, You got the gig now.
I got 980-1026 lumen on my fenix tk15 1000 lumen light…
Flashaholics: Texas_Ace:Lets not get back into stuff that is under the bridge.
Fenix have sent me a 1000 lumen PD35 V2.0 for review, I’ve measured it on my lightbox at 1018 lumens ANSI with Samsung 30Q and 1088 lumens ANSI with Ampsplus Q30.
It would have measured 600-800 on my TA tube.
My TA tube had been reading very accurately. My ROT66 219B measurements has been very close to what Maukka and others measure. My TK01 measures exactly the same as Mateminco specs, which is exactly 2,215 lumens on turbo.
Maukka got multiple readings from the ROT66 219B after I pointed out an anomaly to him. I get a similar anomaly with my convoy S2+ lights and thats that’s why I won’t order one off him.
I got 980-1026 lumen on my fenix tk15 1000 lumen light…
My Fenix PD35 performs very differently to each battery used to test it, I was expecting the opposite.
So far I’ve recorded between 1018-1102 ANSI
Delusion trumps reality
Delusion trumps reality
Every time.
Finally received my calibration lights after 12 weeks in the post. I’m sure it was misplaced as the light boxes were completely soaked and the shipping label was barely visible. Amazing it actually arrived.
Just want to thank TA for an excellent job on my Lumen Tube. Tested it against Maukka’s lights and it was only 8 lumens too high. Used another small strip of tape and it’s within 1-2 lumens on both lights. Not going to bother getting it closer.
Great! Really glad to hear that these have panned out to be as accurate as they have been overall.
I still have one sphere available if anyone is interested.
Finally received my calibration lights after 12 weeks in the post. I’m sure it was misplaced as the light boxes were completely soaked and the shipping label was barely visible. Amazing it actually arrived.
Just want to thank TA for an excellent job on my Lumen Tube. Tested it against Maukka’s lights and it was only 8 lumens too high. Used another small strip of tape and it’s within 1-2 lumens on both lights. Not going to bother getting it closer.
That’s good to hear. Do you know what correction factor that equals out to for your tube?
If it is possible, I would like to have the last one of the 3,5” tubes, the number 27. Is it possible?
Had an opportunity to use my Texas Ace Lumens Tube in a short review HERE.
And it was dead-on accurate with Zebralight's spec.
Yes, thank you for your post. There I read about the tube
If it is possible, I would like to have the last one of the 3,5” tubes, the number 27. Is it possible?
I replied to your PM.
I was technically sold out but I looked through the leftover parts and realized I had enough parts to put together 2-3 more if I order the missing pieces. I should have 2 or 3 that can be put together if anyone else wants a last shot at these.
Have any of you tested a stock convoy L6 since calibrating off Maukka? Just trying to get an idea if my own numbers line up with others
Sorry, my L6 has long been modded.
If you want to send a light my way I would be happy to take some readings and send it back if you want.