@Hank: How fast do you think this version could become available?
I'm curious what driver the Osram-D1S will be using as the XP-L HI D1S FET driver applies too much current on the CSLNM1.TG.
If you were to offer centering rings (gaskets) and the driver separately it would be nice.
I could imagine the D1 would also sell very well with the CSLNM1.TG.
X31
(-X3-)
December 9, 2018, 11:14am
6
I already have a D1S, with a black flat though.
I use low drain batteries to tame the current down and get something like 300+ kCd.
I guess the driver could be modified to get only 5A, but how ?
Jerommel
(Jerommel)
December 9, 2018, 11:20am
7
This LED begs for a current regulated driver.
ZozzV6
(ZozzV6)
December 9, 2018, 11:42am
8
Maybe only the firmware changed to limit turbo to a lower pwm level.
Hank_Wang
(Hank Wang)
December 9, 2018, 11:47am
10
Lux-Perpetua:
@Hank : How fast do you think this version could become available?
I’m curious what driver the Osram-D1S will be using as the XP-L HI D1S FET driver applies too much current on the CSLNM1.TG.
If you were to offer centering rings (gaskets) and the driver separately it would be nice.
I could imagine the D1 would also sell very well with the CSLNM1.TG.
If there is enough interest, it should be available in a week time. The D1S driver current is limited within 5A so that it will be safe to use the high drain battery. The gasket is actually the new version, which works fine for both XP-L HI and CSLNM1.TG.
Okay, that's good news indeed! Now, I'm curious what the price will be. I guess I'm gonna "garnish" my next D1S-order with one more D4S, though. :LOVE:
Oh...I almost forgot...how about flashing RampingIOS V3 onto this D1S? Would that be feasible?
mrheosuper
(mrheosuper)
December 9, 2018, 12:17pm
15
Lux-Perpetua:
@Hank : How fast do you think this version could become available?
I’m curious what driver the Osram-D1S will be using as the XP-L HI D1S FET driver applies too much current on the CSLNM1.TG.
If you were to offer centering rings (gaskets) and the driver separately it would be nice.
I could imagine the D1 would also sell very well with the CSLNM1.TG.
If there is enough interest, it should be available in a week time. The D1S driver current is limited within 5A so that it will be safe to use the high drain battery. The gasket is actually the new version, which works fine for both XP-L HI and CSLNM1.TG.
could i order driver and gasket from you, btw, the stock mcpcb is also a little bigger than the led, it’s not a big deal tho
That’s what I was thinking, but for time and money I would expect just a firmware limit on the same driver.
P33
(P33)
December 9, 2018, 12:28pm
20
Is the body gonna be updated as well or is it gonna be the same D1S host.
Gerrit
(Gerrit)
December 9, 2018, 12:28pm
21
Great news Hank, very interested in a complete flashlight.
mortuus
(mortuus)
December 9, 2018, 12:40pm
23
wow that some serious throw… what body hosts color will there be?
USA
(USA)
December 9, 2018, 12:49pm
24
The new model looks so much better. I never had an Emisar, so I will be following this thread.