(Cancelled)D1S+, CSLNM1.TG LED, 850lm, 320kcd

Hi Hank !

Nice to see your lights still get improvements as time goes by …

I have a couple of questions as my favours are actually … (by the way you know me … for example your this morning sent out order #32874 & “#29124:wink: )

- which CCT will this LED have

- would like to see it in a D1 (because I like it a bit more) and I think it will “throw out” a standard D1S … :slight_smile:

- next order (altough a cpoule of lights are on their way :person_facepalming: ) i will do soon will include a D4S with 3000K SST-20 … (and maybe a 4000K one too) :person_facepalming:

- so any chance to get those LED available in other lights like D1 or even a D4Ti ? :smiley:

- … more to come like new ano colors for the D4S for example (blue, red, “golden” and silver would be nice) or other Optics

woah … one more question :student:

- will this “nex gen D1S” run on Ramping IOS V2 or V3 ?

Regards
Michael

I’m interested!

Better tint than the greenish XPL too.

When are you putting 4 of these or 4 of the 2mm white flats in the D4S Hank?

Definitely interested

nice :slight_smile:

Im In !
thank you Hank.

Interested

Definitely interested. I just placed an order for a D1S last week that’s still processing. I’ll be emailing to see if I can change it.

Definitely interested

Definitely interested. I’ll buy the full light of I need to, but could I get an upgrade kit instead? At the very least that gasket, and whatever firmware you use to limit current on the stock driver so I can flash it. Maybe a link to that emitter.

Or if it’s better for your cash flow to offer a driver+gasket+emitter combo like the GT70 did, that’s cool too, I’ll buy it haha.

Please let me know!

Would purchase!

Count me in as well.

Interested. :sunglasses:

Can you make centering rings also? Someone really needs to start making these for some of the Convoy lights at least.

Interested :+1:

Interested!

A regulated D1S with the new osram emitter would be my ideal compact thrower.
I don’t guess Emisar will ever do boost driver lights because it wants to be an inexpensive brand though.

How much more expensive would it be to use a buck/boost driver? I would pay 20$ more. My guess is the other hesitation is that it would probably not have a ramping UI. If it was stepped ramping with good spacing, that would be good enough for me.

Also curious what the throw would be like in a D1 using this emitter

I’m interested!

maybe 20$ more when using buck driver and white flat led, but not anyone willing to spend more 20$ than stock one
my wild guess this light is 5-10 bucks more expensive than stock d1s