Yokiamy
(Yokiamy)
December 26, 2018, 7:17am
33
I don’t have any 21700 cells, but i can Imagine those cells will be good available in a short time.
For now i would be happy with 18650.
Usb recharching is not a must, but a nice to have, i can Imagine people find it useful. Personally, i’d like to change cells myself.
As you can read in all above reactions, people love lights with an electronic sideswitch and Narsil firmware.
For more info about Narsil please ask Tom E or Toykeeper (both respected BLF members)
They will be more then happy to help you if you ask them.
alex64
(alex64)
December 26, 2018, 8:23am
35
Hi, it’s possible to buy the Nichia version with S2+ Desert Tan model?
g_damian
(g_damian)
December 26, 2018, 8:30am
36
I don’t find charging circuits in flashlights useful. Flashlights are bigger and less waterproof. It’s easier to swap a battery and continue using the flashlight.
Simon, what about L2 with side switch? Many users would be very happy.
i’m ready to launch an new model ,single cell ,XHP50.2
it seems not meet your requirement,I can refer to your request and design an flashlight with side switch and stainless steel bezel and type-C port,
what battery are you ready to use?
I am curious about this new light :o
mortuus
(mortuus)
December 26, 2018, 10:10am
39
that light looks interesting with the xhp50.2 emitter, so probably a very floody light?
NWoodsman
(NWoodsman)
December 26, 2018, 5:55pm
40
In Simon’s video here:
It appears the BD03 might have an e-switch in the tailcap due to the battery carrier device. Is this the case? If so, we could put a nice driver in this one.
SKV89
(SKV89)
December 26, 2018, 7:31pm
41
This looks great. 21700 with Type-C recharge will be awesome! Can we request that the driver is separate from the USB C recharge so it can be replaced? I’m sure many people will like to mod this flashlight with spacer and quad emitters.
Also, would be nice if you can come out with a 21700 S2+.
i’m ready to launch an new model ,single cell ,XHP50.2
it seems not meet your requirement,I can refer to your request and design an flashlight with side switch and stainless steel bezel and type-C port,
what battery are you ready to use?
Simon_Mao
(Simon Mao)
December 27, 2018, 2:31am
42
yes,and what driver and reflector?
Simon_Mao
(Simon Mao)
December 27, 2018, 2:34am
43
It depends on personal habits.
Similarly,some are used to tail button, some prefer side switch
Simon_Mao
(Simon Mao)
December 27, 2018, 2:34am
44
only side switch ,no tail switch,right?
Simon_Mao
(Simon Mao)
December 27, 2018, 2:35am
45
yes, floody,it couldnt be a thrower because the diameter of the head is not big
Jerommel
(Jerommel)
December 27, 2018, 2:38am
46
Ryzbor:
Great to see you on BLF Simon!
Nice you started offering high-cri convoys. However most producers seem to implement the SST-20 or LH351D high-cri leds instead of the somewhat oldish 219C.
Imho the OP reflector should be by default in the S2+ instead of the SMO since the S2+ is an allrounder/EDC light, not a thrower.
Please consider using the well regarded and desired XPL HI 5D or 5A with a nice tint instead of the ugly and yellow XPL HI U6-4C.
Emisar sells the 5D with great success.
Thanks,i will consider to use SST20 or LH351D ,too
S2+ is not a thrower even installing SMO reflector,but the OP reflector can make the light spot even.
5D and 5A is a little redish ,i will try them
TIR optics is really even.
…and cheaper !
Simon_Mao
(Simon Mao)
December 27, 2018, 2:38am
47
NWoodsman:
In Simon’s video here:
https://www.youtube.com/watch?v=Ju-jzbmNq00
It appears the BD03 might have an e-switch in the tailcap due to the battery carrier device. Is this the case? If so, we could put a nice driver in this one.
it’s 1288 switch inside, my friend
Simon_Mao
(Simon Mao)
December 27, 2018, 2:44am
48
SKV89:
This looks great. 21700 with Type-C recharge will be awesome! Can we request that the driver is separate from the USB C recharge so it can be replaced? I’m sure many people will like to mod this flashlight with spacer and quad emitters.
Also, would be nice if you can come out with a 21700 S2+.
i’m ready to launch an new model ,single cell ,XHP50.2
it seems not meet your requirement,I can refer to your request and design an flashlight with side switch and stainless steel bezel and type-C port,
what battery are you ready to use?
Separating the type-c port and driver increases difficulty of flashlight assemblement and driver production.
i can ask driver manufacturer to produce several kinds of driver what you need.
21700 S2+ was added in my plan
Jerommel
(Jerommel)
December 27, 2018, 2:47am
50
I love 30° pebbled TIRs in S2+ like “cigar” lights.
Even XP-L2 looks good with it.
offline
(offline)
December 27, 2018, 5:04am
51
“21700 S2+ was added in my plan”
That’s going to be awesome
SKV89
(SKV89)
December 27, 2018, 5:58am
52
That is great news! I think with the 21700 form factor, people will be buying the S2+ 21700 to mod with quad emitters and carclo quad optics like how everyone was modding the S2+ 18650 with triple emitters so I think we need at least 10A max mode. But that might be too much for the stock single emitter.