Convoy L2 XHP50.2 K2-1C outdoor performance

no 5000K in stock presently ,i will order some if you need it ,my email is 468924022@qq.com

Good news but 1000mA is quite low I would like to get 2000mA .

i will get some 25mm xhp50 DTP board samples tomorrow

Simon, is there any chance to get the Convoy L6 tail cap / tail part as spare part?

It would be great to use it for high current purposes on other flashlights.

I plan to make a considerable purchase order on your webshop and this would be the icing of the cake. :LOVE:

Thank you.

Are you just talking about the inside switch

No, actually I'm looking for the entire tailcap unit with the outside switch.

i dont have spare tail
but if you need the tailcap and the switch ,i can send you some for free

If there is an XHP35 model coming I will definately be buying one of those. Hopefully there will be a 3500/4000K version. That would be awesome.

Thank you Simon, that would be great! I will leave a message in my AliExpress order. :-) :BEER:

I think, this set could be good for a premium XHP35 HI L2 variant:

5700K 90CRI - Pure white:
XHP35A-H0-0000-0D0UC257E or XHP35A-H0-0000-0D0UC20E2

4500K 90CRI - Neutral white:
XHP35A-H0-0000-0D0UB445E or XHP35A-H0-0000-0D0UB40E4

3500K 90CRI - Warm white:
XHP35A-H0-0000-0D0UB235E or XHP35A-H0-0000-0D0UB20E6

I think, 80 CRI emitters could be also considered, but a high CRI thrower looks brilliant.

Another (probably stupid) question: If I add multiple items to my shopping cart and choose "ePacket" as shipping method it looks as if I am being charged for shipping cost for each item again and again. In the end this adds up to quite a big amount of shipping cost. Is this correct this way or am I overlooking something and it can be corrected later on before I actually pay with PayPal?

Looking great Simon!!

Good to hear your are still bringing out some new stuff.

About the XHP35 driver, go with a minimum of at least 1500mA, 2000mA would be great if possible.

the amount should be $93.29,
$93.29*85%=$79.3
if you pay for your order on aliexpress, i will adjust the amount to reduce the repeated shipping cost.
if you transfer money to me via paypal ,you can leave me your paypal account, i will send payment request

the inner diameter of L2 for driver is too small for XHP35,
i’m ready to enlarge it to 30mm,
maybe i will use L6 host directly

Thank you Simon! That sounds terrific! :-)

Looking forward this light as well :slight_smile:

Me too ,hope Simon drive it hard to 2000 mA .

How about equipping it with the CSLNM1.TG or CSLPM1.TG? I read people were getting 500kcd + with the L2.

I made 541 kcd with CSLNM1.TG in L6
But it is not very easy to focus good and I needed to leave centering ring out so forr mass production it is a pain to set up those leds focus properly.

For mass protection, if they make an mcpcb specific to this emitter and centering ring, focusing shouldn’t be a problem.