Low-cost copper pills, spacers, optics, drop-ins. Custom parts.

1636 posts / 0 new
Last post
kiriba-ru
kiriba-ru's picture
Offline
Last seen: 1 hour 8 min ago
Joined: 01/17/2016 - 02:34
Posts: 1931
Location: Russia

No more custom threaded parts, dies are on sale.

kiriba-ru wrote:

Courui D01
HD-2010
Brynite B158
P60 single led stock reflector
Ultrafire or another brand SK68 clone
Surefire type E?

sell any die (tool that I used to make good quality calibrated threads) just for $10.

Capital
Offline
Last seen: 6 days 4 hours ago
Joined: 05/23/2018 - 16:21
Posts: 14
Location: SW Missouri

Do the single led P60s have a retaining ring for the driver?

kiriba-ru
kiriba-ru's picture
Offline
Last seen: 1 hour 8 min ago
Joined: 01/17/2016 - 02:34
Posts: 1931
Location: Russia

No. They have tight place for 17mm driver press fit.

Capital
Offline
Last seen: 6 days 4 hours ago
Joined: 05/23/2018 - 16:21
Posts: 14
Location: SW Missouri

Thanks for the quick response. I’ll take 2, just let me know where and how to send payment.

id30209
id30209's picture
Offline
Last seen: 1 hour 50 min ago
Joined: 05/17/2018 - 12:20
Posts: 598
Location: Croatia

Where can i see it (P60 single led???) Not available in first post.

WTB Titanium 4sevens Quarks & Jetbeam TCR1

kiriba-ru
kiriba-ru's picture
Offline
Last seen: 1 hour 8 min ago
Joined: 01/17/2016 - 02:34
Posts: 1931
Location: Russia

It is similar to stock one, but made from copper. Fits standart reflector.
And seems to be sold out.

id30209
id30209's picture
Offline
Last seen: 1 hour 50 min ago
Joined: 05/17/2018 - 12:20
Posts: 598
Location: Croatia

Don’t have one ://
Please attach a photo on next batch.

WTB Titanium 4sevens Quarks & Jetbeam TCR1

kiriba-ru
kiriba-ru's picture
Offline
Last seen: 1 hour 8 min ago
Joined: 01/17/2016 - 02:34
Posts: 1931
Location: Russia
Sierra426
Offline
Last seen: 9 months 3 weeks ago
Joined: 12/20/2018 - 06:40
Posts: 2
Location: United Kingdom

Hi Kiriba,

Any chance of getting a couple of single led S2+ pills.

Plus, put my name down for the p60 pill if/when they become available again.

Thanks.

kiriba-ru
kiriba-ru's picture
Offline
Last seen: 1 hour 8 min ago
Joined: 01/17/2016 - 02:34
Posts: 1931
Location: Russia

Single led S2+ pills are in stock.
S2+ triple spacers and pills, P60 quad drop-ins will be restocked in January.

Sierra426
Offline
Last seen: 9 months 3 weeks ago
Joined: 12/20/2018 - 06:40
Posts: 2
Location: United Kingdom

Great,

I will take 2 x s2+ pills, please send payment details.

Many thanks Kiriba.

SKV89
Offline
Last seen: 42 min 53 sec ago
Joined: 12/10/2017 - 12:46
Posts: 3246
Location: US

Good news. I was able to convince Simon at Convoy to make a 21700 version of the S2+. I asked him to make it fit Carclo quad optics so we can mod it into a quad. He is designing the host to accommodate a different quad optic with dimensions posted here. Does anyone know if this optic is compatible with Carclo quad optic? I want him to make a S2+ 21700 that is compatible with off the shelf quad optic and Noctigon, MTN, L4P quad mcpcb, of course with Kiriba-ru copper pills or spacers Big Smile .

kiriba-ru
kiriba-ru's picture
Offline
Last seen: 1 hour 8 min ago
Joined: 01/17/2016 - 02:34
Posts: 1931
Location: Russia

It is probably compatible with existing quad boards (same led distance) but using such optics (no legs) will cause many issues.

SKV89
Offline
Last seen: 42 min 53 sec ago
Joined: 12/10/2017 - 12:46
Posts: 3246
Location: US
kiriba-ru wrote:
It is probably compatible with existing quad boards (same led distance) but using such optics (no legs) will cause many issues.

You mean such as twisting off the emitters when turning the pill? I don’t think he is making a quad S2+ but just one with host dimensions that can be modded into a quad.

contactcr
Offline
Last seen: 11 hours 14 min ago
Joined: 05/19/2017 - 18:52
Posts: 2854
Location: US

There is a 21700 Amutorch VG10 coming out. Sounds pretty similar to me. However, the Ledil quads seem to fill this niche.

kiriba-ru
kiriba-ru's picture
Offline
Last seen: 1 hour 8 min ago
Joined: 01/17/2016 - 02:34
Posts: 1931
Location: Russia

Yes, remeber amount of broken LEDs when S41 appeared?
I wouldnt give any suggest to the developer. Just let him do his job and stay tuned.

n10sivern
n10sivern's picture
Offline
Last seen: 1 day 3 min ago
Joined: 11/09/2014 - 21:37
Posts: 1520
Location: biloxi, ms

I received my copper spacers and they look awesome. Thank you.

Three tomatoes are walking down the street- a poppa tomato, a momma tomato, and a little baby tomato. Baby tomato starts lagging behind. Poppa tomato gets angry, goes over to the baby tomato, and smooches him… and says, Catch up.

contactcr
Offline
Last seen: 11 hours 14 min ago
Joined: 05/19/2017 - 18:52
Posts: 2854
Location: US

Got my copper S2+ single and custom thin ring in. Machining is great as always. Threads for both the pill and custom ring were very smooth. Especially the custom ring that thing is like butter. Heat transferred well to the body of the light even without any thermal paste on the pill.

If you have a FET or boost single or the copper S2+ host you should be using this no questions asked..

herwintan
Offline
Last seen: 10 months 1 week ago
Joined: 10/01/2018 - 11:56
Posts: 5
Location: Jakarta, Indonesia

Hi Kirill, any chance of you making the quad spacer for convoy M2 again?

kiriba-ru
kiriba-ru's picture
Offline
Last seen: 1 hour 8 min ago
Joined: 01/17/2016 - 02:34
Posts: 1931
Location: Russia

Hi.
I have few spacers, but I need to find or machine rings for the set.

herwintan
Offline
Last seen: 10 months 1 week ago
Joined: 10/01/2018 - 11:56
Posts: 5
Location: Jakarta, Indonesia
kiriba-ru wrote:
Hi. I have few spacers, but I need to find or machine rings for the set.

How many spacers do you have left?

I’m sorry I haven’t seen the set before, which ring did you mean?

kiriba-ru
kiriba-ru's picture
Offline
Last seen: 1 hour 8 min ago
Joined: 01/17/2016 - 02:34
Posts: 1931
Location: Russia
SeniorXJ
Offline
Last seen: 6 months 3 weeks ago
Joined: 09/23/2018 - 02:27
Posts: 103
Location: United States
kiriba-ru wrote:
2pcs http://budgetlightforum.com/comment/1371289#comment-1371289

Is that link where I go to get a triple copper spacer for my S2+??

kiriba-ru
kiriba-ru's picture
Offline
Last seen: 1 hour 8 min ago
Joined: 01/17/2016 - 02:34
Posts: 1931
Location: Russia

Sorry?
I posted link with g_damian build photos that shows how the ring is used in M2 build.
S2+ triple pills, spacers and P60 shells should be restocked in the end of January.

SeniorXJ
Offline
Last seen: 6 months 3 weeks ago
Joined: 09/23/2018 - 02:27
Posts: 103
Location: United States
kiriba-ru wrote:
Sorry? I posted link with g_damian build photos that shows how the ring is used in M2 build. S2+ triple pills, spacers and P60 shells should be restocked in the end of January.

Nice, thank you for the quick reply!

KawiBoy1428
KawiBoy1428's picture
Offline
Last seen: 3 hours 45 min ago
Joined: 04/11/2014 - 18:05
Posts: 3869
Location: The Motor City

Well used my last kiriba-ru P60 Quad copper pill. This is how to wake up an old Surefire 6P that was bored and hone to fit a VTC5A and press fit the copper P60 using these new V2 emitters. I mixed 2 5000k and 2 6500k to blend tints, well the output and tint are outstanding!

The Z59 tail cap is stripped and modded with a 10amp KAN9 Fwd Click switch 18awg bypass on one of Blue’s springs. Z41 bezel with double coated AR lens. Mtn. Guppydrv 3 FET+1 that the FET was changed to an Infineon FET 18awg Leads. Mtn. Quad Copper mcpcb Lumileds V2 6500k and V2 5000k emitters.

4500lm+ out of the Old Surefire 6P Thumbs Up It was worth all the hours of hand fitting and polishing the pill/host for a nice smooth press fit, no need to copper wrap for heat transfer. Can’t remember how many of these P60 pills I used of kiriba-ru’s, they are outstanding and I’m going to need 3 more when they are ready… thanks my man! Beer

KB1428 “Live Life WOT

g_damian
g_damian's picture
Offline
Last seen: 4 hours 9 min ago
Joined: 08/20/2017 - 06:52
Posts: 469

I’ll take aluminum p60 quad (when available) together with u11 quad and copper pill single led for s2+ (with custom slim retaining ring).

Inkidu
Offline
Last seen: 2 days 22 hours ago
Joined: 11/01/2015 - 14:03
Posts: 159
Location: PA

Great products!
Any pictures of the interior (led side) of the C8TT? Dimensions?
Thanks for offering these.

kiriba-ru
kiriba-ru's picture
Offline
Last seen: 1 hour 8 min ago
Joined: 01/17/2016 - 02:34
Posts: 1931
Location: Russia

Inkidu wrote:

Any pictures of the interior (led side) of the C8TT? Dimensions?
Cavity for 32mm pcb and 35mm optics.
2019-01-27-10-51-43
Inkidu
Offline
Last seen: 2 days 22 hours ago
Joined: 11/01/2015 - 14:03
Posts: 159
Location: PA

Thanks for the quick reply. One of the things I was wondering was if there were screw holes.
Also how it compared in size to the usual C8 head.
Thanks again and good luck with sales.

Pages