[Optisolis/E17A/E21A] Jetbeam Jet-µ

Unno, but if I really had to guess I’d say #3.

No idea what colors the crayons might actually be in Real Life™, so yeah, it’s just a guess. :smiley:

Really hard to distinguish between the colors in 3,4 - only the background and glass is noticeably different here.

The colors in 1 look a bit muted and I assume it’s most above BBL due to background

Not sure what is the best CRI but visually (including tint) I think I would go 4,2,3,1 - best to worst. I would probably say 4,3,2,1 judging by CRI alone. I hope i’m wrong and I prefer the worst LED possible so I can not be concerned about such things as much.

Nice :laughing:

According to your comparison above
I speculate :slight_smile:

Picture 1: Is this daylight?

Picture 2 and 3: I see a little rosy tint on the glas? I like this :+1:

Picture 4: Is this the Optisolis? It seems the light blue is a little bit more clear, less rosy

:person_facepalming:

I’m gonna assume 4 is sunlight, since it’s closest to 5600k and will appear the most white. 3 and 2 are rather close, the colors and 3 are a bit darker/ more in shadow than 2, so I don’t know if the difference there is slightly less illumination, or the colors being washed out. The cooler tones in 2 pop a bit more though, however the darker tones in 3 are close to what the tones in 4 are. Actually now that I look at it again, the colors in 3 are close to 4, and 2 are closer to 1 (mainly the peach and the brown crayons)

I’ma go:

1st place: 4 diffused sunlight
2nd place: 3 optisolis
3rd place: 2 E21A
4th place: 1 Cree

Again though, a lot of the difference I’m seeing between 2 and 3 seems to be slight exposure difference.

I cropped them out and overlaid them in photoshop so I can swap back and forth fastly to make the comparison easier.

3>4>2>1

4=5700K ?

Forgot to post the answer link:
Answer
Password later :wink:

- Clemence

All images shot with 5600K WB

This is getting unexpectedly FUN!
Please vote here guys =))

- Clemence

I voted 4.
My reasoning:
1 = very blue.
2= shadow is to brownish
3= shadow is to brownish

23 hours to guess….
Good night everybody Zzzz….Zzzz…

- Clemence

Aargh !! The suspense is killing me !

:stuck_out_tongue:

I have monitor so bad I won’t even guess…

If we’re guessing specific emitters…

1. Cree something. Probably whatever the Jetbeam comes with. CW, green, and low-CRI.
2. Neutral, but not especially high CRI. Under 90 - could be 80. 119D or 319A.
3. High-CRI, but not the highest here. Rosy tint. 219B or E21A, most likely. Could be E17A.
4. Highest-CRI. Optisolis.

My guess is that
1 is some cree, maybe >70CRI though
2 is 219C 90CRI
3 is E21A
4 is Optisolis

I voted 1 for highest CRI, but perhaps above the BBL.

It’s really hard to see the difference on a LCD because the color reproduction is so horrible, especially on a TN panel.

I think 2 is the highest CRI. However the CCT is not the same on the 4 emitters so that makes it harder to compare. In reality, when our eyes are adjusted to the CCT, it makes less difference than what we see on the monitor.

same here … and still going on while my Apples are laying beside … nothing is better than scrolling the old style (but with Logiech’s Infinite thing) …

so, #2 for TN :person_facepalming:

Not being a CRI “connaisseur” I voted the same #1!
I don’t know in which order I would line them up after that (maybe 1 > 2 > 4 > 3 ?), but that was my vote too!
Looking forward to see the results :wink:

Hmm… The red of the crayon in pic 1 looks like typical low CRI / red deficit lighting.
But i doubted too, because the glass in pic 1 looks green as glass often does.

Hum, you may be right too!
I was looking more towards the pink crayon, not the red, and it seems more “natural” to me. Hence my vote.

Looking now at the yellow crayon on picture #1, it seems to have less yellow colour.
But my monitor may be influencing my perspective, as I noticed differences between the computer and the cellphone :confounded:
Also, I guess the tint of the light is (the) tricky thing here, leading to see the colours differently. I noticed than when I put the Sofirn CO1 (both colour temp) against Nichias and NW XP-G2. The first impact was the same, but going into detail the differences could be seen.

Despite, I will keep my vote on #1 and let the right correct the wrong :wink: