FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public

[contactcr]

Muggle mode is super low max brightness, there is no “turbo”

[joechina]

@dealgrabber2002

If I enter Muggle mode and I click and hold, will the turbo be max at the Muggle mode or regular mode?

According to the manual muggle mode is ca. 10 lm to ca. 300 lm. No special blink modes and it survives a battery change.
It should jump to 300 lm

[madsnake]

I am interested in one with the samsung leds if it is not too late.

[bigtrav261]

Add me for one with LH351D, please.

[ToyKeeper]

@joechina

@dealgrabber2002

If I enter Muggle mode and I click and hold, will the turbo be max at the Muggle mode or regular mode?

According to the manual muggle mode is ca. 10 lm to ca. 300 lm. No special blink modes and it survives a battery change.
It should jump to 300 lm

Muggle mode is simplified to only a few actions:

• Click for on/off.
• Hold to change brightness.
• 6 clicks to exit.

… and that’s all. There is no turbo, no shortcut to max, no click-release-hold, nothing.

[DB_Custom (Dale)]

Plainly put, no magic.

[robertsig (Rob)]

I am in for one. LH351D. Thanks.

[WTF]

One XPL Hi please.

[cdjaney]

I’ve tried searching with no success….but I have a feeling this has been asked or discussed before. Can someone tell me what the comparison of beam,output etc between the XPL-HI version and the LHD version should be?

OR…can you link me to where that info might be?

I’m interested in one…maybe two lights….but curious about this.

TIA!

[BlueSwordM]

Output:
The XP-L HI will have the highest output, but the LH351D 4000k 90CRI isn’t actually that far behind considering it’s a 90CRI emitter.

Beam:
The XP-L HI will be quite a bit throwier than the LH351D. The LH351D will be much floodier.

Tint:
Unless Lumintop/we find a golden way below BBL sample, the XP-L HI will have a better tint than the LH351D, especially if the XP-L HI comes in a 5D tint bin.
The LH351D is not bad, just not as good as the XP-L HI in terms of tint.

Color rendition:
The LH351D hands down. It crushes the XP-L HI if not counting for the tint, especially outdoors.

[saypat]

One LH351D 4000k 90CRI for me please

[justanotherguy]

I’m already down for one, XPL HI

Put me down for another one, the other LED

[dealgrabber2002]

@ToyKeeper

@joechina

@dealgrabber2002

If I enter Muggle mode and I click and hold, will the turbo be max at the Muggle mode or regular mode?

According to the manual muggle mode is ca. 10 lm to ca. 300 lm. No special blink modes and it survives a battery change.
It should jump to 300 lm

Muggle mode is simplified to only a few actions:

• Click for on/off.
• Hold to change brightness.
• 6 clicks to exit.

… and that’s all. There is no turbo, no shortcut to max, no click-release-hold, nothing.

Memory?

[scalyman1 (scalyman.)]

I am already down for one. I think I would like to change that to 2 please. One of each emitter type. Thanks

[OldSchoolAirCool]

I’m already down for 2 LH351D lights (didn’t see my name on the list though), but would like to bump that to 3 if possible.

Thank you!

[JasonWW]

@OldSchoolAirCool

I’m already down for 2 LH351D lights (didn’t see my name on the list though),

As I said a couple days ago…

@JasonWW

There have been no updates to the main list since Jan 6th. So everyone that has made a request since then will not see their name until the list is updated again.

If your not sure when the list was last updated, just click the last name on the list. You will go to the request and see the date and time.

Thanks

Your initial request was Jan 9th, that’s why you don’t see your name on the list yet.

[Eraursls1984]

@BlueSwordM

Tint:
Unless Lumintop/we find a golden way below BBL sample, the XP-L HI will have a better tint than the LH351D, especially if the XP-L HI comes in a 5D tint bin.
The LH351D is not bad, just not as good as the XP-L HI in terms of tint.

5D is 4000K, correct? We’re supposed to see the XP-L HI in 5000K, so maybe 3A (most common availability I see).

[OldSchoolAirCool]

Whoops, I missed that. Thank you.

[Nite_Shadow]

I thought it XPL HI 3D? Would be great but I am probably wrong.

[Shadowfax]

Please increase my order from one light to two — one of each emitter type.

Thanks to all the fine folks making this design happen — greatly appreciate all of your hard work.