That looks positively stunning.
Please put me down for one (1) anodized with the LH351D 4000K 90CRI emitter.
That looks positively stunning.
Please put me down for one (1) anodized with the LH351D 4000K 90CRI emitter.
From the OPā¦.
Current status (2019-01-28): Production samples arrive tomorrow for testing/review. Production should start within days, if things go well.
I also think itās strange that my āproductionā sample has a cool white (>5700K) emitter.
LOL, I have not noticed any chinese flashlight manufacturer that understands what a production sample is and why it should be made.
. Really?? I had overlooked/missed thatā¦
That is indeed strangeā¦. :question:
Wow! 100 posts on this thread since I checked it yesterday.
Nice review Maukka! Looks like Lumintopās time spent going through different iterations to get this light just right has paid off. The light looks fantastic!
Hopefully, within a couple months weāll all have our FW3As!!!
XPL HI for me please.
It may have been asked before, butā¦
The two flashlights Iām signed up for, can I buy more than I signed up for, and an I buy a few of the other Emitter also?
Or do I have to buy only the ones I signed up for?
Thanks
maukka, can you measure that MCPCB and make sure itās the same width as all the other triple MCPCBās?
Iām pretty chuffed lumintop are making this, Iām very happy with the build quality on Tool AA v2 and my EDC 01.
One question please, will all the XPL HI versions have a frosted flood lens?
Isnāt that output quite low? The D4 measures around 4300 lm with 4 XPL-His. My naive calculation would expect a 3 emitter light with XPL-His to be 4300/4*3 = 3225 lm.
The D4 does 20kcd so I would expect this light to get to 15000kcd. Is the difference only the frosted optics?
Sorry if went wrong somewhere. I am not good with flashlight maths xD
Iāve noticed since Iāve signed up that everyone has specified their emitter choice. I didnāt. For mine Iād like XP-L HI if that info is needed. I may also take a second in the LH351D option but for now just the 1 XP-L HI. Will I have the option to decide on the second light when theyāre ready or to I need to sign up for both now?
Uncancel me and put me down for an XPL-Hi version.
Maybe one should explicitly mention that the flashlight is very short and only short unprotected 18650 batteries should be used with it. Or else something could be crushed trying to fit in a longer battery? That happened to me with another light. Almost damaged the driver board, barely saved it as I noticed the crushing sound.
Getting excited for this one, hate to ask but can you add an additional light for me? Think I need one in each flavor. I'm #1033 on the list.
Thanks!
I put in a request for one, but can I update that and ask for one of each emitter? Iām #1326 in the list.
Getting super excited about this. I checked in just a couple days ago, and my mind was blown by all the talk since I saw last!
So I wonder now, which is going to be the true production anno colorā¦
[quote=tatasal]
Please add me for a 4th. I am on the list for 3 already.
1 is already going to be gifted and when another friend sees this he will want to purchase it for sure.
Itās looking great and I am getting excited again!
Thanks! You got this info posted fast! All Iāve got so far is a note from DHLā¦
Itās really unfortunate that cool white emitters were used. Iāve asked about why that happened, but I donāt expect to hear back for a while.
Later. The list data does not include emitter choice, so it doesnāt really help to specify anything about that now. The plan is to make equal amounts with each emitter type, because the poll data of ~500 people was split almost exactly 50/50.
If you want more throw, polish the 10511 optic or switch to a 10507 optic. The amount of throw attainable is not currently known, but it should be the same as any other XP-L HI triple. It is not going to be a throwy light no matter what you do though, because thatās not how these triples work.
Maukka has more accurate and better-calibrated measuring tools than any of the people behind this project. The estimate was about 2500 to 3000 lumens, or maybe even above 3000ā¦ and with my light box it would probably exceed that easily. But my light box isnāt calibrated as well as maukkaās, because mine is still using the Zebralight / cpfselfbuilt scale instead of the less-impressive-looking ANSI scale.
In any case, it looks like it does reach 3000-ish lumens, but turbo is only for brief use anyway. Itās a burst mode.
The lowest mode should be about 0.2 lm, roughly.
Muggle mode goes from about ~10 to ~300 lumens. Ish. Or maybe 5 to 250. It hasnāt been properly measured yet, but it does not go up to the highest regulated level. The highest regulated level runs too hot for children to operate safely.
I havenāt had much luck getting in touch with a lot of the original team lately, like fritz15 and The Miller. However, because people keep asking, I might set up a Patreon account or something. If I do though, I want to make it clear that itās just me, not a team thing. I donāt know if I could send money to Fritz if I tried, nor do I know if he would want me to. Past attempts to do a team-funding thing havenāt really gone well either, so any donation thingies will probably be done on an individual basis with no illusion that itās for everyone.
I remember the issues in that one, and Iām worried too. I can only hope things will be better this time. IIRC that was the first project a new business did, and I hope a year of experience has given them enough time to fix things.
The spec includes āno glueā, but I can make sure that point is repeatedā¦ and hopefully there wonāt be any surprise glue. I canāt confirm there wonāt be though, because the nature of surprise glue is, um, surprising.
There might be glue in the tail end though. The decision on tail glue has gone back and forth. But there should be no glue in the head end.
The spec also includes āno logo or other markings on the light itselfā, and this point has recently been repeated to Lumintop. I donāt think itāll have any logo, but as usual, nothing is ever certain until after it happens.
No, itās supposed to be a ā3Dā tint, ~4875K with a slightly pink bias.
Exactly. :person_facepalming:
I donāt know how Neal is planning to handle that. He might have individual coupon codes or something, matching names and quantities exactly. Or he might make it an honor system. Or something else. Really not sure yet. Maybe Neal or M4D M4X can explain how thatāll work?
After a request is cancelled, it cannot be un-cancelledā¦ but a new request can be added. Requests and cancellations go in chronological order, so youāll be added at the end of the list during the next update.
Added to the OP.
Anyway, I think I should be getting a sample tomorrow, and plan to do testing and pictures right away.