FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public

[MascaratumB]

@teacher

FW3B = Brass

FW3C = Copper

FW3D = Damascus

FW3G = Gold

FW3I = Cast Iron

FW3M = Mokume

FW3N = Naked

FW3S = Stainless

FW3SS = Sterling Silver

FW3T = Titanium

FW3U = Uranium (might need a safety warning on this one… )

FW3W = Wood

Yeah…we have projects for the next 20 years or so :smiling_imp:

Keeping this on-topic: let’s wait some more weeks to see this FW3A beauty!
For those that meet the criteria and wanna have a chance of winning one of these lights, I have an ongoing GiveAWay! Check the link in my loooong signature :smiling_imp:

[teacher]

@MascaratumB

Yeah…we have projects for the next 20 years or so :smiling_imp:

Keeping this on-topic: let’s wait some more weeks to see this FW3A beauty!
For those that meet the criteria and wanna have a chance of winning one of these lights, I have an ongoing GiveAWay! Check the link in my loooong signature :smiling_imp:

Yep we sure will. :+1: . I’ll have to get a second job just to keep up with the FW3_ Series.

It will indeed be a pleasure to lay hands on the FW3A.

Thanks for the opportunity in your Give Away too!!

And personally, I like your looooong sig line.
………. Especially the last link at the end.

[Rat_Racer]

@teacher

Hi Tooreal….

Yeah, both those would make beautiful lights for sure!! :heart_eyes:

I’m acquainted with Brad Vice , their shop is less than 20 miles from my house.
I think I could get a proper sized billet from him fairly reasonably.

I have two friends that are machinist & teach that at two different vocational schools. One in my county & one in a neighboring county. They each have the latest equipment at their disposal.

When I actually get a FW3A in hand I am gonna disassemble one & take it to each of them to see what the possibility’s are. It sure can’t hurt.

Even if I had them change the internals a bit so as to eliminate the inner tube & electronic tailcap…. it would still be a beautiful light. :heart_eyes: . :+1:

All types of possibilities…… if I can get at least one of them on board.

Time will tell……

Actually not too far off the design, but there is a gent making your dreams sorta…

[CRX]

Very nice.

[saypat]

could someone decipher the logo and post a link to the gent making our dreams …. thanks

[Rat_Racer]

@saypat

could someone decipher the logo and post a link to the gent making our dreams …. thanks

Deadwood Custom Works, found on FB and IG. He also sells thru Recon 1 website.

[teacher]

@Rat_Racer

Actually not too far off the design, but there is a gent making your dreams sorta…

That is absolutely beautiful!! Thank you for sharing… :+1:

Can you share a link.

Where you from in SWFL?? I have friends in Bonita Springs, Cedar Key, Largo, & Venice.
.
Edit: Just saw the info on that light, thanks.

Edit #2: Here is a link to the DEADWOOD CUSTOM WORKS flashlights sold on Recon 1.

[Cereal_killer]

Maybe the FW3U should be changed to the FW3DU? Just for cost savings.
Raw uranium is way more $$$ than depleted uranium.

[teacher]

@Cereal_killer

Maybe the FW3U should be changed to the FW3DU? Just for cost savings.
Raw uranium is way more $$$ than depleted uranium.

Ok if we just add that one?? To keep our options open you know….

[Msan]

I would be down for one LH351D

[junkyardbiker]

FW3CF…… Carbon Fiber.
FW3BF…… Buckyfiber.

[Cereal_killer]

@teacher

@Cereal_killer

Maybe the FW3U should be changed to the FW3DU? Just for cost savings.
Raw uranium is way more $$$ than depleted uranium.

Ok if we just add that one?? To keep our options open you know….

I was kinda thinkin it’d be better for health and safety reasons too but didn’t want to seem like sissy girl making suggestions like that.

[teacher]

@Cereal_killer

@teacher

@Cereal_killer

Maybe the FW3U should be changed to the FW3DU? Just for cost savings.
Raw uranium is way more $$$ than depleted uranium.

Ok if we just add that one?? To keep our options open you know….

I was kinda thinkin it’d be better for health and safety reasons too but didn’t want to seem like sissy girl making suggestions like that.

I understand completely, I think it was a great suggestion!! A manly suggestion even….

[Rat_Racer]

@teacher

@Rat_Racer

Actually not too far off the design, but there is a gent making your dreams sorta…

That is absolutely beautiful!! Thank you for sharing… :+1:

Can you share a link.

Where you from in SWFL?? I have friends in Bonita Springs, Cedar Key, Largo, & Venice.
.
Edit: Just saw the info on that light, thanks.

Edit #2: Here is a link to the DEADWOOD CUSTOM WORKS flashlights sold on Recon 1.

Ft.Myers, but inland, amongst orange groves and sugar cane.

[Yokiamy]

@Rat_Racer

Yeah, nice, until your doughter grabs your light out of your hand and drops it.
My advice, carry a cheap alternative which may be dropped and not borrow your brand new light :person_facepalming:

[teacher]

Updated Model List for the FW3_ Series flashlight. *Wish List that is*.
.
FW3BF = Buckyfiber
FW3BR = Brass
FW3BZ = Bronze
FW3C = Copper
FW3CF = Carbon Fiber
FW3D = Damascus
FW3G = Gold
FW3I = Cast Iron
FW3L = Lead
FW3M = Mokume
FW3N = Naked
FW3P = Platinum
FW3S = Stainless
FW3SS = Sterling Silver
FW3T = Titanium
FW3U R = Uranium - Raw (might need a safety warning on this one… )
FW3U D = Uranium - Depleted
FW3W = Wood
FW3XX = Cheap fake/knockoff copy of FW3A. Key word is ’cheap’.

_

Special Order / Ready for Purchase _In your dreams_.

• FW3UN = Unoptainium

[teacher]

@Rat_Racer

Ft.Myers, but inland, amongst orange groves and sugar cane.

That sounds great to me… :+1: . One of my friends sons lives around Felda, he loves it.
Take care.

[Firelight2]

@teacher

@Cereal_killer

Maybe the FW3U should be changed to the FW3DU? Just for cost savings.
Raw uranium is way more $$$ than depleted uranium.

Ok if we just add that one?? To keep our options open you know….

So you have to register your flashlight with the Nuclear Regulatory Commission? :smiling_imp: And each one comes with instructions to only purchase if you don’t plan to have any more children. :sunglasses:

[Rat_Racer]

@teacher

Updated Model List for the FW3_ Series flashlight. *Wish List that is*.
.
FW3B = Brass
FW3BF = Buckyfiber
FW3C = Copper
FW3CF = Carbon Fiber
FW3D = Damascus
FW3G = Gold
FW3I = Cast Iron
FW3M = Mokume
FW3N = Naked
FW3P = Platinum
FW3S = Stainless
FW3SS = Sterling Silver
FW3T = Titanium
FW3U R = Uranium - Raw (might need a safety warning on this one… )
FW3U D = Uranium - Depleted
FW3W = Wood

I would do BR for brass, and throw a BZ in the there for some Bronze love.

[Rat_Racer]

@Yokiamy

Yeah, nice, until your daughter grabs your light out of your hand and drops it.
My advice, carry a cheap alternative which may be dropped and not borrow your brand new light :person_facepalming:

Yup, and that’s another appeal of the FW3XX.
I just read about a gent who lost his $$$ Pele in a ball pit at Chuck E Cheese.