3 volt XHP50.2

lol its 3am here give it a few hours maybe in like 7 hours they will be in. Cutter is also a member here on BLF.

I have made many orders at Cutter but shipping gets me every time its $12 AUD from Melbourne where they are to Sydney. Makes me cry considering i can get a flight for like $60 lol.

I bought a couple myself… Also saw an interesting COB as well (CMT2890)…

DD drivers probably won't work well with Vf that low (similar to Luxeon MZ).

I have XM mosX 20mm boards for LD-B4 if anyone wants to use this LED in combination with LD-B4:

https://led4power.com/product/mosled-extreme-mosx-ceramic-insulation-xm-5050-mcpcb-20mm/

I hear you. The live chat says “We’re Online!” and I’m anxious these will all got bought up. It has been so long since I bought from Cutter my login doesn’t work. I ended up buying the bare led without the login.
As a side note, I’ve got some interesting stuff from down under. Look familiar?


Seems like the perfect LED for 10440 or 10180 hotrod. :slight_smile:

Did a test with CMT 2850 and L6 reflector but i have problems with the solder melting.

Well drop in and visit me. :slight_smile:
To save grief later check their stock levels first before ordering.

LOL it wasn’t much more than $12AUD to ship to the US…

I would hope to get 16A into it with a good low IR cell and FET driver. From Texas Ace’s test of the 6V XHP50.2, at 8A, or 4A per die, the voltage is 6.78V. So with all dies in parallel it should be about 3.39V at 4A per die, or 16A total. So this should be doable if the total circuit resistance (including cell) is 50 mOhms.

200 pcs arrived this morning, tested on a 16mm noctigon, it is indeed 3v, uses a split anode pad for parallel structure

welight - thanx for posting here! I ordered qty 2 bare w/free shipping. could you explain what shipping service is used? How long approx. to the US?

EasyB - didn't think bout 16A, but it all makes sense. Getting 4000-5000 lumens from 1 LED and 1 cell with one of our simple FET drivers is pretty cool! Basically the mod could be done as a simple LED swap to an existing XM-L2 FET light we have now, just a lot more heat.

Sorry mate cant get the images to load? I am hoping its an army of Blue heelers/Cattle dogs? lol

Yea i defiantly will next time i am down.
I went 3 years in a row to the bodybuilding comp there but i stopped when they changed the date to the same weekend time as the F1 its busy for me. Before it was on Moomba festival weekend. Around the same time there is the Phillip island classic that’s worth a look also, I’d love to go back.

This one sounds the best :smiley:

Looks like a piece of Skippy’s birthday suit.

This could be the emitter I’ve been saving my BLF Luckysun D80 for

What a nice emitter, great find! Too bad this isn’t kaidomain or arrow, the shipping costs deter me from ordering it (although the costs are kind of understandable from AU to my location - just not worth it for 1 LED).

looking to buy 2 leds to try out but the shipping cost more than the LED itself.

This is sad and i will pass the deal :frowning:

Hoping Arrow and Kaidomain will get this LED eventually

Nico

Were you quoted letter or parcel for postage?

I got 3 bare emitters, 2 on 20mm stars, and a 20mm TIR in a letter for about $6.50 postage.

Adding anything slightly bulky seems to push the postage up to ~$12 for a parcel, but I suspect you could get around 3kg of stuff in there.

You got me dreaming about 3 kg of XHP50.2s……

only shipping option and none a reasonable cost.