MTN Electronics: LEDs - Batteries - Lights - Chargers - Hosts - Drivers - Components - 1-Stop-US Source

I’m expecting Richard himself to be coming in here soon with some really good news. :smiley:

Ohhhhh Riiiiichard……?

Wherefore Art Thou, Counselor?

LOL

I still have 3000k SST-20s left as iamlucky noted.

Any hints? LED's, batteries, drivers, lights?

Yeah, give us some hints :slight_smile:

The suspense is killing me… :disappointed:

Please be programmable, linear drivers in various diameters (like Led4Power’s drivers but it more diameters).

I know the website says 20mm & 22mm boost drivers will be available soon. But that’s been on there for a while now.

New Emisar 18 LED light?

Lol I think you’re onto something

As Dale said the most common cause is a bad connection, usually either the driver retaining ring, the switch retaining ring, or the body threads which when either too loose or too tight cause problems such as forcing the mcpcb pads into contact with the reflector. Several places to look but start with the rings.

Ok, so was it something with 18 LED's? Ol news now...

Well today’s been a bust!No news from the Raspberry Pi foundation, and nothing from Richard. I,m going to bed early then. :frowning:

There is a new Convoy S11 host listed on the site, which I haven’t seen before… which would go nicely with a 22mm boost driver that’s been in the works for a while.

I think it’s going to be the boost driver announcement.

I don’t know what the news is, but RMM’s last post here suggested he was a bit overwhelmed… was recovering from a serious injury at the time, while also running a business, keeping a day job, and raising a family. Also possibly finishing law school or perhaps setting up a new legal practice or otherwise pursuing a pretty intensive career. Oh, and developing new hardware for BLF. That’s a lot even for the most motivated and energetic of people.

I did order some goodies from him at the end of Feb and his website had a popup saying he was going to be on break for a little bit, it took about a week before stuff shipped out but for a US shipper with quality products Im willing to wait.

Definitely not trying to pressure Richard, I’m just excited to see what the newest product is :smiley: Hopefully he wasn’t injured too badly, and he makes a very quick recovery!

I sent a message on MTN website, but I had a browser trouble on that moment so I don’t know if it was delivered or not.
Does anyone know if Richard is flashing Narsil or Anduril on his 15mm - 17mm drivers? I know it has the D4 UI V2, but no clue on the other firmware.

Appreciate any info on this :+1: Thanks in advance!