[Discussion] Sofirn C01S SST-20 4.000K 95CRI

72 posts / 0 new
Last post

Pages

Lux-Perpetua
Lux-Perpetua's picture
Offline
Last seen: 7 hours 42 min ago
Joined: 03/01/2018 - 04:39
Posts: 1059
Location: Germany, 德国, ドイツ, Германия, जर्मनी
[Discussion] Sofirn C01S SST-20 4.000K 95CRI

Lo and behold...here is the thread about the new Sofirn C01S

The Sofirn C01S is a single 1.2V/1.5V cell AAA twisty with a HighCRI Luminus SST-20 LED (CCT 4.000K, 95CRI). If you are looking for the predecessing Sofirn C01, please click ► here ◄.

 

Pictures courtesy by Sofirn @ AliExpress (see order link)

 

Some specs about the light:


 

Emitter: Luminus SST-20 4.000K 95CRI

UI: twist head to turn on/off, quickly loose and fasten head to switch between 100lm / 3lm modes

Mode Order: High-Low

Battery: 1.2V NiMH or 1.5V Alkaline AAA

Size: 71,6mm in length, 14,5mm in diameter (head)

Weight: 15g (without batteries)

Body Colour: Black / Blue / Red

 

Price: Currently, there are no group buy conditions available. The C01S was offered during pre-launch for $ 8.88 and later on for $ 10.99.

Order link via Sofirn's shop on AliExpress:

https://www.aliexpress.com/item/Sofirn-C01S-BLF-Mini-LED-Flashlight-AAA-Twisty-High-95-CRI-SST20-4000K-LED-keychain-Flashlight/32952525303.html

Update (03/26/2019): Diffuser caps can be bought from Sofirn here:

https://www.aliexpress.com/store/product/2pcs-lot-White-diffuser-for-sof...

 

Link to the user manual (German/English) on my sharepoint:

https://drive.google.com/drive/folders/1VFoxQ1hc2rKUoilGJK7i9GGg_Hd_WKQv...

Please note that I was asked to not change the name of the flashlight in the manual as it has already been printed with its former project name "C01 Pro" and is part of the content of each shipped C01S now.

 

BLF special edition of the C01S

Djozz is in negotiation with Sofirn about a special edition for BLF members. It is planned to differ from the original version as follows:

- reversed order of modes (L-H instead of H-L)
- clear anodization instead of black/blue/red
- BLF insignias

... [to be supplemented]

Update 2019/03/14

  • Sofirn confirms possibility for approx. 200 pcs w/o anodization (no clear anodiozation!)

Update 2019/03/15

  • Reversed mode order is feasible
  • Insignias are yet to be defined (e.g. "BLF C01S", "C01S BLF edition")
Edited by: Lux-Perpetua on 03/26/2019 - 03:58
Lux-Perpetua
Lux-Perpetua's picture
Offline
Last seen: 7 hours 42 min ago
Joined: 03/01/2018 - 04:39
Posts: 1059
Location: Germany, 德国, ドイツ, Германия, जर्मनी

[reserved for review]

teacher
teacher's picture
Offline
Last seen: 3 days 8 hours ago
Joined: 02/23/2016 - 19:04
Posts: 7971
Location: NE & SW Alabama

Nice job Lux-Perpetua!! Thumbs Up

You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant 

 .................................. "Slow is Smooth, Smooth is Fast" ...................................

       Texas Lumens Flashlights / M4D M4X Deals : sign up - save $$$$  

         Rudeness Level _ mΩ _ {width:70%} _ LightWiki _ LED Tint Chart  

      Xlamp size chart _ BatteryU _ Flashaholic? Need Professional Help???            TheOriginal _ TAB _ LightSearch _ BatterySearch _ 14500's _ DiCal 

 

                                             

Lux-Perpetua
Lux-Perpetua's picture
Offline
Last seen: 7 hours 42 min ago
Joined: 03/01/2018 - 04:39
Posts: 1059
Location: Germany, 德国, ドイツ, Германия, जर्मनी

Thanks for your kind feedback teacher! Roll tide! Smile

djozz
djozz's picture
Offline
Last seen: 33 min 41 sec ago
Joined: 09/07/2012 - 17:04
Posts: 14579
Location: Amsterdam
Thumbs Up Will report when mine arrives too (package has not left Sofirn yet)
teacher
teacher's picture
Offline
Last seen: 3 days 8 hours ago
Joined: 02/23/2016 - 19:04
Posts: 7971
Location: NE & SW Alabama

Lux-Perpetua wrote:

Thanks for your kind feedback teacher! Roll tide! Smile


Your welcome my friend!! Thumbs Up . ROLL TIDE!!
I love that picture….. Beer

You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant 

 .................................. "Slow is Smooth, Smooth is Fast" ...................................

       Texas Lumens Flashlights / M4D M4X Deals : sign up - save $$$$  

         Rudeness Level _ mΩ _ {width:70%} _ LightWiki _ LED Tint Chart  

      Xlamp size chart _ BatteryU _ Flashaholic? Need Professional Help???            TheOriginal _ TAB _ LightSearch _ BatterySearch _ 14500's _ DiCal 

 

                                             

lotrbfme
Offline
Last seen: 19 min 27 sec ago
Joined: 12/05/2018 - 18:03
Posts: 122
Location: FL

Ordered 1 at $8.88 price

rost333
rost333's picture
Offline
Last seen: 2 hours 45 min ago
Joined: 08/08/2018 - 10:01
Posts: 103
djozz wrote:
I am in conversation with Barry about a BLF version of the C01S, I hope to achieve a version with the mode order reversed (so start in low)…

This video (https://www.facebook.com/sofirn.cn/videos/1989311321364409) shows that C01S is starting with low mode first.

I’m confused. So which mode is first one? Low or high? Can someone clarify please? Thank you! Wink

Tech25
Online
Last seen: 5 min 1 sec ago
Joined: 07/29/2018 - 22:37
Posts: 13
Location: NY

It looks like high- low to me. They put in the battery and screwed it in all of the way onto high, then when he put it in front of his hand, he turned it onto low and then continued the cycle.

djozz
djozz's picture
Offline
Last seen: 33 min 41 sec ago
Joined: 09/07/2012 - 17:04
Posts: 14579
Location: Amsterdam
rost333 wrote:
djozz wrote:
I am in conversation with Barry about a BLF version of the C01S, I hope to achieve a version with the mode order reversed (so start in low)…

This video (https://www.facebook.com/sofirn.cn/videos/1989311321364409) shows that C01S is starting with low mode first.

I’m confused. So which mode is first one? Low or high? Can someone clarify please? Thank you! Wink


That took 3 views to unravel: she (small hands btw) switches it on (high), then off, then on again (low) then off-on (high). The off-time after the first switch-on was short enough for the driver to detect a mode change instead of interpreting that as a switch-off.

So my conclusion: high->low

rost333
rost333's picture
Offline
Last seen: 2 hours 45 min ago
Joined: 08/08/2018 - 10:01
Posts: 103

Yes, thank you, it’s in line with their description on Aliexpress page: “no memory function and default brightness is High mode”.

mortuus
mortuus's picture
Online
Last seen: 2 min 51 sec ago
Joined: 12/16/2014 - 09:33
Posts: 1583
Location: Sweden

looks interesting, on bg its a long date ahead before they get in stock it seems Sad i will order it later i guess. I asume using 10440 in this light is not working ?

...where Frugal meets with Flashlight!

Di_Joker
Di_Joker's picture
Offline
Last seen: 3 hours 29 min ago
Joined: 02/21/2018 - 08:07
Posts: 116
Location: RU

Low mode 3Lm seems useless to me. Optimally it would be low mode to make 10-20Lm.

Sorry for my poor english.

MtnDon
MtnDon's picture
Offline
Last seen: 16 min 22 sec ago
Joined: 08/27/2015 - 18:25
Posts: 2282
Location: Canuk in NM

Looks like a nice little light.

Di_Joker wrote:
Low mode 3Lm seems useless to me. Optimally it would be low mode to make 10-20Lm.

Depends. There will be many opinions on what the lowest brightness level should be. They are all correct for the particular user.

Myself, I prefer around 1 to 2 lumen maximum for the lowest level. Even lower if there is a Medium level as well as Low and High. My favorite general purpose pocket light has 0.5 lumens as the lowest, then 7, 70 and 250. (4 in total with the highest seldom used.)

If you are in a truly dark place that is plenty of light and usually not enough to shock your eyeballs. Totally useless if there is any amount of background light, but ideal if you are in a truly dark place.

I do prefer lights to start on the loweset setting and cycle up and back around. I can’t think of many times I have wanted a light to come on in the brightest mode.

BLF Member Map Add your name and location.

shirnask
shirnask's picture
Online
Last seen: 4 min 27 sec ago
Joined: 03/21/2016 - 23:58
Posts: 754
Location: Louisiana

I find 0.5 Lm to be very useful and starting on high a big disadvantage

mortuus
mortuus's picture
Online
Last seen: 2 min 51 sec ago
Joined: 12/16/2014 - 09:33
Posts: 1583
Location: Sweden
Di_Joker wrote:
Low mode 3Lm seems useless to me. Optimally it would be low mode to make 10-20Lm.

no its not, in total darkness even 1lm is more then enough for a light and to save battery.

...where Frugal meets with Flashlight!

lightboks
lightboks's picture
Offline
Last seen: 2 days 1 hour ago
Joined: 11/08/2018 - 07:05
Posts: 68

I find 3 lumen low pretty ideal for general use on a keychain. you don’t always use these in pitch black, so a bit more is alright.

If it had firefly/moon, I actually would have preferred a 3rd low mode at 8-10 lumen, but that’s what the thrunite ti3 and astrolux a1 are already doing.

but yeah, for me the BLF low-high version would be nicer.

But ideally, it should work like in that old discontinued pre-2014 Thrunite AAA twisty light: head fully tightened for max, slightly loose for low, unscrew further for off. That would be ideal. Too bad I missed this light back then, would buy 5 of these.

rost333
rost333's picture
Offline
Last seen: 2 hours 45 min ago
Joined: 08/08/2018 - 10:01
Posts: 103

djozz wrote:

I am in conversation with Barry about a BLF version of the C01S, I hope to achieve a version with the mode order reversed (so start in low)…

Lux-Perpetua wrote:

- reversed order of modes (L-H instead of H-L)

- clear anodization instead of black/blue/red

- Any word from Barry about BLF version?
- Is clear anodization essential?
- Could we ask for copper head version?

lightboks wrote:
I find 3 lumen low pretty ideal for general use on a keychain. You don’t always use these in pitch black, so a bit more is alright.
+1
gchart
gchart's picture
Offline
Last seen: 2 hours 20 min ago
Joined: 03/19/2016 - 11:57
Posts: 1427
Location: Central IL

Lux-Perpetua wrote:
BLF special edition of the C01S… reversed order of modes (L-H instead of H-L)

If this happens, I’m in for a few!
P33
Offline
Last seen: 3 hours 24 min ago
Joined: 09/25/2018 - 16:41
Posts: 211
Location: Kraków, Poland

Copper version would also be great.

djozz
djozz's picture
Offline
Last seen: 33 min 41 sec ago
Joined: 09/07/2012 - 17:04
Posts: 14579
Location: Amsterdam
Quote:
- Any word from Barry about BLF version?  - Is clear anodization essential?  - Could we ask for copper head version?

1)Yes it seems like there is going to be one, 200 pieces without anodisation (took half a year to convince them that there are people who actually would want an unfinished flashlight), but no confirmation about low first yet. Btw, I’m not going to arrange a dedicated group buy for this, I’d be ok with that it just goes for sale at the Sofirn store.

2 and 3) based on a longterm discussion about the C01, I believe a no-ano version is nice as a BLF-special, and it is clear from the poll that most people want the mode order to be low->high so that is what I asked as well. Sure there will be endless other possible versions thinkable (my own preference would still be purple Party ) but I think this version is a good choice that many will appreciate.

P33
Offline
Last seen: 3 hours 24 min ago
Joined: 09/25/2018 - 16:41
Posts: 211
Location: Kraków, Poland

I’d defo be getting one of clear ano versions. No matter what the mode order is. It doesn’t really matter to me in such a small light.

djozz
djozz's picture
Offline
Last seen: 33 min 41 sec ago
Joined: 09/07/2012 - 17:04
Posts: 14579
Location: Amsterdam

P33 wrote:
I’d defo be getting one of clear ano versions. No matter what the mode order is. It doesn’t really matter to me in such a small light.

This not about clear ano, but no ano at all. This will look and feel more rough because it is in fact what comes straight out of the CNC machine. That is why they don’t get why we want this Big Smile .
polarweis
polarweis's picture
Offline
Last seen: 13 hours 18 min ago
Joined: 05/31/2017 - 17:05
Posts: 328

no ano blf edition sounds good

"It wouldn’t be so bright if there wasn’t a shadow every once in a while." - Jason Mraz

sochi111
sochi111's picture
Offline
Last seen: 11 hours 7 min ago
Joined: 02/21/2017 - 14:59
Posts: 163
polarweis wrote:
no ano blf edition sounds good

No Ano looks polished and shiny or has a matte layer of Alum oxide ?

P33
Offline
Last seen: 3 hours 24 min ago
Joined: 09/25/2018 - 16:41
Posts: 211
Location: Kraków, Poland

For me it’s gonna be a keychain light, anodization will be gone in no time anyway so I’m fine to start without it in the first place Smile

rost333
rost333's picture
Offline
Last seen: 2 hours 45 min ago
Joined: 08/08/2018 - 10:01
Posts: 103

After seeing this beauty I changed my mind and now I’m all in for clear version.

mortuus
mortuus's picture
Online
Last seen: 2 min 51 sec ago
Joined: 12/16/2014 - 09:33
Posts: 1583
Location: Sweden

haha thats funny, sofirn shakes their heads why anyone would want a raw unfinished light.. Big Smile

...where Frugal meets with Flashlight!

djozz
djozz's picture
Offline
Last seen: 33 min 41 sec ago
Joined: 09/07/2012 - 17:04
Posts: 14579
Location: Amsterdam
mortuus wrote:
haha thats funny, sofirn shakes their heads why anyone would want a raw unfinished light.. Big Smile

I think that the beauty of a rough and used tool does not fit in chinese culture.

Barry confirmed that low->high will be possible, he asked for what lettering it should have and I suggested C01S BLF no-ano edition, or if too long C01S BLF edition, or if too long C01S BLF Ed. Any objections or better ideas for the text?

rost333
rost333's picture
Offline
Last seen: 2 hours 45 min ago
Joined: 08/08/2018 - 10:01
Posts: 103
djozz wrote:
Barry confirmed that low->high will be possible

That’s great news Smile Thanks djozz!

djozz wrote:
200 pieces without anodization

So will there be a limit per order per person? I would buy more than one if that’s possible.

djozz wrote:
…he asked for what lettering it should have and I suggested C01S BLF no-ano edition, or if too long C01S BLF edition, or if too long C01S BLF Ed. Any objections or better ideas for the text?

C01S BLF edition would be great imho.

hodor
Offline
Last seen: 26 min 19 sec ago
Joined: 07/11/2018 - 03:58
Posts: 183
Location: UK
djozz wrote:
Barry confirmed that low->high will be possible, he asked for what lettering it should have and I suggested C01S BLF no-ano edition, or if too long C01S BLF edition, or if too long C01S BLF Ed. Any objections or better ideas for the text?

How about BLF C01S?

Pages