[♛ FreemeGB] ASTROLUX MF01S 18*SST20 CRI95/ XP-G3 15000lm 4x18650 Flashlight Group Buy - [Preview]

251 posts / 0 new
Last post
pooptoast
Offline
Last seen: 17 hours 56 min ago
Joined: 08/12/2015 - 23:11
Posts: 107

Looks awesome, interested for sure.

Marcello
Offline
Last seen: 1 week 4 days ago
Joined: 09/05/2016 - 17:55
Posts: 24
Location: San Francisco

Interested!

zotee123
Offline
Last seen: 1 week 4 days ago
Joined: 07/04/2018 - 20:50
Posts: 23

Interested for 1.

AlexGT
AlexGT's picture
Offline
Last seen: 1 hour 15 min ago
Joined: 06/07/2012 - 17:39
Posts: 4117
Location: Texas

15000 initial lumens, What is the sustained lumens afterwards?

RobertB
RobertB's picture
Offline
Last seen: 3 days 19 hours ago
Joined: 12/18/2015 - 17:49
Posts: 3042
Location: USA, Michigan

Interested dark blue. I’d pay extra for XPL-HI 5000k

Texas_Ace
Texas_Ace's picture
Online
Last seen: 50 sec ago
Joined: 03/24/2016 - 07:44
Posts: 8188
Location: Everything is brighter in Texas
AlexGT wrote:
15000 initial lumens, What is the sustained lumens afterwards?

I have not gotten a final sample yet to measure for myself. Nor have the final LED’s been selected yet. So it is impossible to say.

Texas_Ace
Texas_Ace's picture
Online
Last seen: 50 sec ago
Joined: 03/24/2016 - 07:44
Posts: 8188
Location: Everything is brighter in Texas
RobertB wrote:
Interested dark blue. I’d pay extra for XPL-HI 5000k

This was in the plans early on but the lumen output was not much better then the XP-G3 / SST-20 and the cost would have to be higher with XP-L HI, so they scrapped that idea.

It is possible to swap the LED’s yourself but considering the cost of 18 xp-l LED’s I can understand why they decided to not do it.

I do have one here with the XP-L HI setup and it works good but honestly I prefer the SST-20 version and have been using it for almost everything recently.

netprince
Offline
Last seen: 10 hours 14 min ago
Joined: 06/14/2012 - 13:48
Posts: 502
Location: Virginia

Interested

Plat
Plat's picture
Offline
Last seen: 8 hours 23 min ago
Joined: 10/31/2017 - 01:27
Posts: 60
Location: Australia

Interested Smile

Smokecutter
Smokecutter's picture
Offline
Last seen: 1 week 2 days ago
Joined: 04/28/2018 - 22:51
Posts: 10
Location: United States

Interested please.

oweban
oweban's picture
Offline
Last seen: 1 hour 25 min ago
Joined: 02/12/2019 - 06:34
Posts: 109
Location: Sydney

Texas_Ace wrote:
BlueSwordM wrote:
@mortuus, because it would require reworking the body.

Also, I think there should be a limited edition copper plated light.

A special edition copper version of the light is also possible with enough interest, they seemed open to a lot of custom versions if I could prove there was enough interest. They just have not told me how much interest is needed.


I’m imagining an MF01S that weighs about the same as a BLF GT Smile Secondary uses – house demolition, holding small children down, etc
jakeattack77
Offline
Last seen: 1 week 4 days ago
Joined: 10/31/2017 - 03:24
Posts: 2
Location: United States

interested!

Man Without Shadow
Man Without Shadow's picture
Offline
Last seen: 46 min 52 sec ago
Joined: 02/20/2017 - 18:17
Posts: 356
Location: Wisconsin

interested…great job, TA and Lexel!

When I'm spending mony foolishly, I like to do it wi$ely...

I have all the flashlights I need, but not as many as I want...

 

oweban
oweban's picture
Offline
Last seen: 1 hour 25 min ago
Joined: 02/12/2019 - 06:34
Posts: 109
Location: Sydney

Lexel, will the aux LEDs be adjustable or be able to be completely disabled from the main firmware, or only from the trimmers on the aux board? And if it’s just the aux board, they better make sure not to glue it!

nokoff
nokoff's picture
Offline
Last seen: 3 hours 53 min ago
Joined: 12/12/2013 - 20:26
Posts: 340
Location: East Coast USA

Purple! I’d take a purple!

Lexel wrote:
They made prototypes in black and 7 other colors, so lets see what in the end will be available on sale, sure they have to limit the color count

!{width:70%}http://www.metronixlaser.de/bilder/flashlight/91ACB35E8E06CB59A95BAFCA1C...!

Nokoff..still Made in China 山寨主義

Future Lights
Future Lights's picture
Offline
Last seen: 2 days 17 hours ago
Joined: 02/14/2019 - 15:05
Posts: 11
Location: Copenhagen suburbia

Why not a clear body and light green top bessel, head what ever, or maybe blue – I don’t know.

Texas_Ace
Texas_Ace's picture
Online
Last seen: 50 sec ago
Joined: 03/24/2016 - 07:44
Posts: 8188
Location: Everything is brighter in Texas
Future Lights wrote:
Why not a clear body and light green top bessel, head what ever, or maybe blue – I don’t know.

I requested a clear option as well, they made one but it was after that last picture was taken:

Tom E
Tom E's picture
Online
Last seen: 42 sec ago
Joined: 08/19/2012 - 08:23
Posts: 11771
Location: LI NY

It's March 14th, so must be 18 LED day! coolcoolcoolcoolcoolcoolcoolcoolcoolcoolcoolcoolcoolcoolcoolcoolcoolcool

 

Wow!! Nice job TA/LEXEL!!

Guines69
Offline
Last seen: 14 hours 29 min ago
Joined: 09/08/2018 - 17:54
Posts: 28
Location: Toronto

Interested for sure!

Weidercs
Offline
Last seen: 2 days 5 hours ago
Joined: 03/10/2019 - 00:48
Posts: 2

Interested

nokoff
nokoff's picture
Offline
Last seen: 3 hours 53 min ago
Joined: 12/12/2013 - 20:26
Posts: 340
Location: East Coast USA

Mateminco MT18 version?

looks larger too than the MF01S

Texas_Ace wrote:
Future Lights wrote:
Why not a clear body and light green top bessel, head what ever, or maybe blue – I don’t know.

I requested a clear option as well, they made one but it was after that last picture was taken:

Nokoff..still Made in China 山寨主義

Texas_Ace
Texas_Ace's picture
Online
Last seen: 50 sec ago
Joined: 03/24/2016 - 07:44
Posts: 8188
Location: Everything is brighter in Texas

nokoff wrote:
Mateminco MT18 version?

looks larger too than the MF01S

Texas_Ace wrote:
Future Lights wrote:
Why not a clear body and light green top bessel, head what ever, or maybe blue – I don’t know.

I requested a clear option as well, they made one but it was after that last picture was taken:

Yeah, the MT18 and MF01 are the same light, just a different logo. I just call it an MT18 as that was the working name when the project was started last year.

Size wise, it should be the same size as the MF01, just a little taller so we could fit the extra fins. I think the hand is just small and makes the light look larger.

malamask
malamask's picture
Offline
Last seen: 2 hours 52 min ago
Joined: 12/16/2015 - 19:41
Posts: 335
Location: Greece

Interested

klrman
klrman's picture
Offline
Last seen: 10 hours 45 min ago
Joined: 11/07/2016 - 22:44
Posts: 2136
Location: Canada

Texas_Ace wrote:
Future Lights wrote:
Why not a clear body and light green top bessel, head what ever, or maybe blue - I don't know.
I requested a clear option as well, they made one but it was after that last picture was taken: !{width:50%}http://pballandmore.com/images/2019/MT18-Color-10.jpg!:http://pballandmo...

 

Clear version looks about 10 times nicer than the silver one.

Texas_Ace
Texas_Ace's picture
Online
Last seen: 50 sec ago
Joined: 03/24/2016 - 07:44
Posts: 8188
Location: Everything is brighter in Texas
klrman wrote:

Texas_Ace wrote:
Future Lights wrote:
Why not a clear body and light green top bessel, head what ever, or maybe blue – I don’t know.
I requested a clear option as well, they made one but it was after that last picture was taken:

 


Clear version looks about 10 times nicer than the silver one.

I agree, not sure why it was so hard for them to see that lol.

vik267777
Offline
Last seen: 2 hours 9 min ago
Joined: 05/05/2018 - 00:20
Posts: 14
Location: Canada

Interested

Future Lights
Future Lights's picture
Offline
Last seen: 2 days 17 hours ago
Joined: 02/14/2019 - 15:05
Posts: 11
Location: Copenhagen suburbia

A clear version with some bezel selections or even set! I want Orange!

Can these batteries be used with this light? I know performance will be reduced but I want an every day option with some safety. I am limmited by local tax limit:

Here:

oweban
oweban's picture
Offline
Last seen: 1 hour 25 min ago
Joined: 02/12/2019 - 06:34
Posts: 109
Location: Sydney

They’ll either trip, or it won’t go anywhere near max.

edit:: actually, even samsung 30Qs were a squeeze into the MF01; I don’t think they’ll even fit. I’ll let someone more knowledgeable than I answer that fully.

Tubercle
Offline
Last seen: 6 days 10 hours ago
Joined: 03/10/2019 - 14:28
Posts: 7
Location: USA

I’m interested

Slipgun
Offline
Last seen: 1 week 8 hours ago
Joined: 12/09/2018 - 02:27
Posts: 2
Location: Canada

Interested. Price depending

Pages