Hi BanL,
I have an order processing since 06/03/2019 and everything is in stock.
Can you check why my order still not shipped.
Thank you and have a nice day.
Regards
#4094
I ordered from KD on 5th, they sent on the 7th and it arrived the 13th, i was stunned! Very quick. And it was well packed with everything correct.
I also ordered on the 11th, received notification today (16th) that it’s been sent, slightly longer but still quick.
Feel like i’ve had 2 wins in row. 
Thanks KD!
(That’s not in response to those whose orders haven’t been shipped yet btw, i’m genuinely thankful.)
And now i feel a need to order the JA3 2700K SST-20. Will it be 3 in a row?
What were you searching on that netted 801 pages of products?
Maplin products were referenced by a 5 or 6 letter SKU, not that it changes their customer service but it could have saved you some typing if you’d know that at the time!
Hi allegreto
Please don’t worry.
Your package had shipped out and is processing in our logistics courier service provider.
I will get the tracking status updated on today.
Thank you
Ban
Hi Ban,
Last year (I do not know when exactly because I never made an account on KD) I bought 2 XHP35 Hi leds, 4000K 80CRI from Kaidomain.
I have used them both in a flashlight now and measured CRI, both are 70.1 CRI, so not 80 CRI as listed on your site. Is your whole batch 70 CRI, or are you currently selling a different batch? As you understand I’m a bit disappointed.
Thanks 
Hi djozz
Let me verified with our current stock.
Sorry for any inconvenience cause to you.
Ban
Thanks for checking. As for the inconvenience: the 70CRI leds that I used have good output and a good tint so the flashlights that I built with them are still nice enough. But I really wanted the 80CRI, that is why I bought the leds.
Hi BanL,
Can you please give me some advice where to get this plasticine and white potting compound you use on this driver?
http://kaidomain.com/Flashlight-DIY-and-Tools/Circuit-Board-Driver-Board/S026841-KX70-32mm-4A-1-cell-6-Mode-Boost-Driver-Circuit-Board-with-Side-Switch-for-Cree-XHP70-6V
Hi Lux-Perpetua
This is RTV Silicone.
Thank you BanL! 
Is there any way to reach you besides of this thread? I have some technical questions concerning your H1-A and H2-C drivers (mostly about tweaking them with alternative resistors to run them with 12V LEDs like XHP35). I also sent you private messages before but did not get any response so far. I also started a new thread that I would like to invite you to: WTB: XHP35 20mm Boost Driver (improvements of Kaidomain H1-A)
It would be great if you were to help me as these tweaks might be beneficial for Kaidomain, selling a high performance XHP35 boost driver for flashlights like the brandnew Convoy S11 or Convoy L2 or your own KD-brand flashlights, of course.
Cheers, Thomas
Hi Lux-Perpetua
Sure. I will take into that.
I am sorry for the late reply.
I will get back and catch up the thread.
Ban
Thank you Ban!
Hi freinds
I had gotten some SST-40 dedomed LED in KD.
Please note that the dedomed led will have the color temp. shift to around 5000K to 5500K
Enjoy
Ban
Wait, did you dedome them manually?
If so, that is amazing.
Hello BanL,
Can you sell a 3 or 4 mode variant (e.g. 5% - 30% - 100% or 1% - 8% - 30% - 100%, no strobes) of this buck driver?
http://kaidomain.com/Flashlight-DIY-and-Tools/Circuit-Board-Driver-Board/BD39-17mm-1_5A-3V-9V-1-cell-or-2-cells-1-Mode-Buck-Driver-Circuit-Board
If that would be possible, that would be very useful for me for driving a few specific 3 to 5 W powered very low Vf LEDs.
And Ban did not respond to that post? 
Ban, did you check your current inventory of XHP35 Hi 4000K 80CRI? If these are indeed 80CRI, could I have a replacement of the two wrong 70CRI ones from last year?
Hi
Sorry for the replying you late.
Do you have any order number so that i can refer to?
The current wheel is in CRI80.
Thank you
Ban
No, I’m sorry. I never created an account on Kaidomain because it works fine to send the goods to my PayPal address. And it was still on the old site when I ordered them and your order conformation mail when the old site was still on, did not contain a summary of the ordered items, just an order nr and the amount of money. There is no way for me to know which of my 2018 orders were these leds.
So there’s no order nr coupled to the leds. Maybe it is in your administration? (I’m sure there’s just one Jos from Amsterdam )
Yes, we get a customer that is used for the SST-40 dedomed LED.
I had tried to reserve some for selling.