Sofirn C01S SST-20 4.000K 95CRI / Low-High version available again!

Yes, there will be a limited run with that especially for BLF. Should be ready one of these days btw.

they should make a run of these in copper :slight_smile:

nice :sunglasses:
I was going to get 2 C01s along with a few other lights during the big AX sale.
But in that case wil hold off on the 2 C01S untill we can get the BLF edition :smiley:

Will you like these diffuser?

https://www.aliexpress.com/store/product/2pcs-lot-White-diffuser-for-sofirn-C01-C01S-SP10-SF14-Q8/2933049_32991805908.html

Great news djozz! So wait for long!

Hi Barry, they look good and look like they will diffuse well. Looks like they are not made of silicone but a harder plastic, right?
I think the price is too high, especially the small ones may not sell well because of the price.

Espeially when there are “free” alternatives out there like Chapstick and Vick’s nasal inhaler caps that work pretty nicely.

Thanks!

I would say their prices looks pretty good, especially since they are offering 2pcs/package.

They are a better value anyway than the Fenix diffusers.

Updated post #2 with my impressions of the C01S in comparison to the C01.

Why it's not potted?

The diffuser is made of POM, I know nothing about it but I was told it can survive in 100℃

Does it really can replace metal sometimes?

it seems XPG3 real has ugly beam. I can see purple blue green in the beam of lumintop aaa

@Barry, acetal/POM plastic is actually perfect for a diffuser, as it can resist to high temperature, is extremely tough(meaning it won’t get destroyed like acrylic), and most importantly, has extremely good light distribution properties since its thickness is usually very uniform.

Cool, sounds like a good material.

I’ve seen worse to be honest. The XP-G3 is known for it’s ugly beam / tintshift but Lumintop used a pebble-design TIR lens on the EDC01, so the beam is both floodier and more smoothed. But I agree that C01S’ beam looks much more appealing in comparison to any other AAA light I have tried out so far. :wink:

I just got my C01s in. I really like it, the high and low are both very usable and the tint and CRI is nice… I don’t notice ugly green on low like this led is supposed to have. It does get warm on high with extended use and that’s expected. This will be a great backup light for me. Debating on adding a magnet to this.

I’m absolutely in for a BLF version with low- high.

I have been using this light for a few days. The low is really useful and brighter than the lumens number suggests. I have been mostly using the low mode but the high is very bright as well. I like this led/optic combination. I paired this up with my lumintop IYP365 head on an aaa tool body. The low on the C01s appears about the same as the medium on the lumintop combo.

Is there any updates for the BLF version?
Low/high would be much better for daily use.

No updates atm

Thank you!