FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public

13580 posts / 0 new
Last post
tpc2084
Offline
Last seen: 7 months 4 weeks ago
Joined: 04/26/2019 - 07:40
Posts: 2
Location: Illinois

1 please

EnlightenMe
Offline
Last seen: 8 months 3 weeks ago
Joined: 10/29/2018 - 07:46
Posts: 43
Location: United States

TK, instead of a timed script, wouldn’t it be easier to find out from Lumintop how many units are ready (X), and send notification to the first X/2 people on the waiting list? Then, repeat when more units are ready/leftover from the IPO.

Paulz323
Offline
Last seen: 1 year 1 month ago
Joined: 04/26/2019 - 07:44
Posts: 1

Interested in picking up 2 if list is still open!

dukeface13
Offline
Last seen: 1 year 1 month ago
Joined: 07/21/2017 - 12:52
Posts: 14

Put me down for 1 more. 2 total. Thanks TK

Duke™

pennzy
pennzy's picture
Offline
Last seen: 16 min 8 sec ago
Joined: 12/10/2017 - 19:45
Posts: 1867
Location: United States , Pa.

What are the two color temps again please?

flucero28
Offline
Last seen: 8 months 1 week ago
Joined: 04/24/2012 - 11:24
Posts: 44
Location: New Mexico

I’m in for one WW please.

cwright314
cwright314's picture
Offline
Last seen: 9 months 2 weeks ago
Joined: 04/26/2019 - 08:20
Posts: 5
Location: Nice France

Signed up for this! I would like 1 please.

oweban
oweban's picture
Offline
Last seen: 6 hours 21 min ago
Joined: 02/12/2019 - 06:34
Posts: 1027
Location: Sydney AU

pennzy wrote:
What are the two color temps again please?

3D is 4750-5000K or so
7A is 3000-3250K or so (I think?)
mortuus
mortuus's picture
Offline
Last seen: 3 hours 32 min ago
Joined: 12/16/2014 - 09:33
Posts: 2591
Location: Sweden

But im confused, if its listed at Neals then how will lights be sent, those in this list should be sent before anyone at neals page to randoms or ?

...where Frugal meets with Flashlight!

headburger
Offline
Last seen: 3 weeks 2 days ago
Joined: 09/11/2016 - 17:02
Posts: 11
Location: UK

Orders for FW3A are already being accepted on Nealsgadgets, if the little pop up messages are anything to go by.
I saw 2 presumably full-price orders from Germany just in the few seconds it took me to register on Neals site.

So it looks like BLF codes when we receive them might only give discounted price, not ordering priority?

pennzy
pennzy's picture
Offline
Last seen: 16 min 8 sec ago
Joined: 12/10/2017 - 19:45
Posts: 1867
Location: United States , Pa.

oweban wrote:
pennzy wrote:
What are the two color temps again please?

3D is 4750-5000K or so
7A is 3000-3250K or so (I think?)

Thanks.
M4D M4X
M4D M4X's picture
Online
Last seen: 13 min 26 sec ago
Joined: 03/19/2014 - 05:17
Posts: 8379
Location: Austria (GMT + 1)

Neal needs the shop to enable correct ordering (invoices, tax, customer data security etc)

the groupbuy people still get the benefit of the better price. 

that's not new Wink 

 

and someone just paid the full price I think Big Smile

 

the Ordering will start today and shipping will start in a week or so

so being first or fivehundredst to place the order does not make a massive delay in shipping date

but waiting for batches of 20 or 50? people as in the list to place their orders may delay the groupbuy for weeks! 

 

 a groupbuy with payment upfront would be different.of course 

here the power of the community did allow to make this light come to reality for a great price 

 

 

 all new deals are posted here: 

deals.m4dm4x.com

ask MARTIN@M4DM4X.COM - i will try to save you money!

FindThisHumerus
FindThisHumerus's picture
Offline
Last seen: 2 weeks 50 min ago
Joined: 05/16/2017 - 07:15
Posts: 113
Location: United States

Possible to still get this at the discounted price? If so I’d like one with the XPL-HI in warm white

Bored anesthesia resident

Kuyaaaron
Offline
Last seen: 2 months 1 week ago
Joined: 04/26/2019 - 08:40
Posts: 2

Please put me down for 1 XP-L HI and 1 SST-20 when available.

clip.
Offline
Last seen: 11 months 3 weeks ago
Joined: 03/19/2019 - 11:31
Posts: 40

There hasn’t been much more discussion on this, but just a thought – the hole at the end of the clip might be used for manufacturing purposes (aligning in a jig, for example).

fgials
fgials's picture
Offline
Last seen: 5 months 2 weeks ago
Joined: 09/18/2012 - 13:28
Posts: 11
Location: Mississippi

In for at least 1 maybe 2. Please!

Soft kitty, Warm kitty, Little ball of fur.
Happy kitty, Sleepy kitty, Purr Purr Purr

Nowhere
Offline
Last seen: 9 months 2 weeks ago
Joined: 04/26/2019 - 09:08
Posts: 2

Put me down for 1 please

kevinmartingreen
Offline
Last seen: 9 months 6 days ago
Joined: 04/26/2019 - 09:12
Posts: 1
Location: US

I’m just commenting to get signed up for group buy. Thanks for producing a cool light. I will buy 1 maybe 2.

Creeker18
Offline
Last seen: 1 year 3 weeks ago
Joined: 04/26/2019 - 09:22
Posts: 5
Location: Cave Creek AZ

I would like in for one please. Very neat little light!

MascaratumB
MascaratumB's picture
Online
Last seen: 7 sec ago
Joined: 10/29/2016 - 12:12
Posts: 4934
Location: Portugal
M4D M4X wrote:
so being first or fivehundredst to place the order does not make a massive delay in shipping date

I just hope it doesn’t imply that people waiting for so long for this light has to wait another X months in case if Lumintop runs out of stock on the first batches due to the increasing number of interested people… That is market logic in case it happens, but I’d rather not have to wait more than it was supposed, and my first request is above the 500.

This said, maybe Neal, M4D M4X and Toykeeper (and eventually other people involved in the “from now on > order & buy” process or with relevant information about it) could communicate to uniformize the process and to let us know clearly how things will be done, avoiding speculation on the process. It is just a proposal.

And of course, thank you again to all the involved people in this process.
And don’t forget those that helped before (pepinfaxera included!!!)

Thumbs Up

[REVIEWS] ACEBEAM: H20 / TK16 // AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 // BLITZWOLF: BW-ET1 // BRINYTE: T28 // DQG: AA Slim Ti // FIREFLIES: ROT66 GEN II // HC-LIGHTS: SS AAA // KLARUS: XT1C // LIVARNOLUX: 314791 // LUMINTOP: Tool AA V2.0 + Tool 25 // NITEFOX: UT20 / ES10K / K3 // ODEPRO: KL52 / B108 // OLIGHT: M2R Warrior // ON THE ROAD: M1 / i3 / M3 Pro // ROVYVON: A2 + A5R / E300S / A8 // SKILHUNT: M150 / M200 // SOFIRN: SF14 + SP10A / SP32A / SP10B // WUBEN: TO10R / E05 / T70 / E10 / TO50R / E19 // XTAR: PB2 Charger // Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 // TIR: 1 / 2 // Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 /// My Collection /// My Review's Blog (PT) /// OL Contest 2019 /// GIVEAWAY: 1 / 2

trakcon
trakcon's picture
Online
Last seen: 56 sec ago
Joined: 01/23/2019 - 15:50
Posts: 274

I’m particularly interested in how it will work for those to want to wait for the SST-20’s. My concern is getting stuck not being able to get the group buy price, or having Lumintop run out of the bunny-less switches before the SST-20’s arrive.

dubyrunning
Offline
Last seen: 1 year 1 month ago
Joined: 03/14/2019 - 15:37
Posts: 9
Location: Maine

Sign me up for one please! 

koolranch
Offline
Last seen: 4 months 3 weeks ago
Joined: 11/28/2018 - 09:26
Posts: 40
Location: United States

In for 3 please.

swiftblade13
Offline
Last seen: 4 days 21 hours ago
Joined: 05/30/2018 - 13:43
Posts: 151

trakcon wrote:
I’m particularly interested in how it will work for those to want to wait for the SST-20’s. My concern is getting stuck not being able to get the group buy price, or having Lumintop run out of the bunny-less switches before the SST-20’s arrive.

I’m also concerned about this
Paradise
Offline
Last seen: 1 month 3 weeks ago
Joined: 04/14/2019 - 08:27
Posts: 85

In for at maybe 1 or possibly 2
Maybe I missed it but it would be great if the emitter can be selected during the checkout.

mortuus
mortuus's picture
Offline
Last seen: 3 hours 32 min ago
Joined: 12/16/2014 - 09:33
Posts: 2591
Location: Sweden
Paradise wrote:
In for at maybe 1 or possibly 2 Maybe I missed it but it would be great if the emitter can be selected during the checkout.

only xpl for now, but 2 choices of tints if thats what u mean ?

...where Frugal meets with Flashlight!

adsum
adsum's picture
Offline
Last seen: 1 month 3 weeks ago
Joined: 12/13/2015 - 17:53
Posts: 223

Add another one for me for CRI option, thanks!

Paradise
Offline
Last seen: 1 month 3 weeks ago
Joined: 04/14/2019 - 08:27
Posts: 85

yes, meant tint. But I am new on here and I wasn’t sure how the entire checkout process will happen (selection of light, address, paypal, tint, and so on).
I guess there will be something like a universal voucher for the people on this list.

mortuus
mortuus's picture
Offline
Last seen: 3 hours 32 min ago
Joined: 12/16/2014 - 09:33
Posts: 2591
Location: Sweden
Paradise wrote:
yes, meant tint. But I am new on here and I wasn’t sure how the entire checkout process will happen (selection of light, address, paypal, tint, and so on). I guess there will be something like a universal voucher for the people on this list.

If ordering will be done on Neals page u will be able select tint of your choice and add extra battery if u want that.

  • Cree XP-L HI 3D(NW) and Cree XP-L HI 7A(WW) LED **

https://www.nealsgadgets.com/collections/blf/products/tlf-blf-fw3a-edc-l...

...where Frugal meets with Flashlight!

Marc E
Offline
Last seen: 1 day 17 hours ago
Joined: 05/18/2013 - 08:14
Posts: 381
Location: South West UK

ToyKeeper wrote:
So what should Lumintop do? Should they wait for a good rosy tint bin which might not exist… or use the widely-available FB4 tint which people are already familiar with in other lights?
The FB4 is my tint of choice and are planned for both my FW3As so naturally i’d want Lumintop to install them as standard.

Pages