Sofirn C01S SST-20 4.000K 95CRI / Low-High version available again!

As requested by me/BLF, the BLF-edition is un-anodised. Sofirn had a hard time accepting that they should deliver an “unfinished” flashlight but did so in the end.

A clear anodised C01S would have had a harder finish, but the rough alu look is what quite a few BLF-members were after.

:point_up: Thanks

so there will be no Blue/Red blf version ? :person_facepalming:

Nice. I ordered it. These are going fast, it seems.

I have a red c01 3200, I have a black c01s, and I will have an “unfinished” flashlight c01s BLF edition. Thank you so much! I am very happy!

Thanks for making the special BLF edition unanodized low-high version happen!
I just ordered a “naked” BLF C01S as well.
Really looking forward to how this light turned out.
Hopefully the tint of the 4000K SST20 is not too green on the low setting…

Order placed. Sofirn (Barry, Jackie, etc) - thanks for the special run of these!

My normal c01s, on low mode the tint is not green at all

Maybe you want to take a look onto my beamshot comparison in post #2. ;-)

When will Amazon actually have them in hand?
Thanks

Keith

I ordered today and it’s expected June 6- June 27. So it will be a (slow) race to see who delivers it first- Amazon or AliExpress.

I bet you get both on the same day if you ordered both at the same date at about same time

I saw a video on YouTube of someone putting a 10440 battery in a C01s and it put out around 200 lumens. What do you guys think about this? Do you think it would burn out if you left it on high for too long? Has Anyone else tried experimenting with a 10440. I think it would be cool if you you could use a 10440 reliably, besides that there is no LVP.

Gone from Amazon already.
Me thinks they better fire up the machines and build like another 1000 if 200 sold out that quick.

Me too^

Just bought one of the last 3 from aliexpress!

I’m seeing three left :slight_smile:

This time though, with the low – high and anodized.

Sofirn Store: “Only 1 left”

That was fast.

Would be awesome if it is safe for the light.

Today I have momentarily tested the use of 10440 in C01 and C01S: the first illuminates the same as with 1.5V, the second goes to triple that with 1.5V. But it was only for testing, not in continuous use.