FW3A mod thread. Post yours!

No that was great, always good to have someone else’s input, especially the creator of the thing.
I do these for myself and maybe help everybody who’s interested in some way too :+1:

True.

I added a strip of the glow tape to the clip groove too.

Maybe… you just can’t help it. . :innocent:

Cool! Thanks for the tip. Going to try that too.

@CRX — nice move on the thin GITD for the clip groove. I’m pretty happy with the top one. Also have a thin one on the body, but might take it off (looks a little busy).

I thought there would be enough space for the tape to go under the tailcap by about 3mm or so but the tape I have is just a little too thick, thinner tapes might do this.

Be nice to ToyKeeper!

She does shower pics!

:person_facepalming:

:smiley: … Hey, it is what it is… many women are much more detailed than many men. No need to be sorry for that. :slight_smile:

正在使用发音
In our country, call him a hooligan rabbit

Luxeon V2’s in 5000k, my favorite emitter behind TIR optics.

I also found very poor thermal compound application on mine so I lightly sanded the bottom of the mcpcb and replaced the white crap with AS5.

How’s the beam compared to XP-L HI?



Just saw it in FB group

SST20 2700K/3000K/4000K on Noctigon

I just ordered a stick of Titanium off Flea-Bay to do the same thing… :+1:

Did you measure the tint on the Luxeon V. Sounds like this will look similar to 5A or 5D tint. How does output compare to xpl?

Slightly wider with a perfect white tint.

I don’t dislike the 3D HI’s, just that the Luxeon V2’s are my favorite led so I wanted to put some in my favorite light!

Nice…

I really like the V2’s as well.
Do you have any estimates on lumens and max Amps?

Sory to be a pest, which Archer?

Was it just the rubber boot?

About a 20% reduction in lumens (I have a tube style “sphere” but it isn’t calibrated from any known sources so I can only do direct comparison).

I’ll measure current when I find my meter, I recently moved my shop from the basement (winter) back to my garage (summer) and haven’t got all my gear set back up yet and don’t know where my clamp meter is ATM.

Cant find anything.

Thank you TrueRMS.

20% sounds good.

I’m also hoping it comes with a few Amps less draw.