✌ FREEME - ASTROLUX MF01S 15000lm Flashlight Group Buy - ENDED

There are four colors LEDs embedded on the board.

3.9v or more color: green + pink + blue
3.3v-3.9v color: pink + blue
2.9v-3.3v color: red
2.9v or less: OFF

Personally, I don’t like the green. Makes it too Christmas toy like. I would prefer another color such as orange or warm white over green.

Yh too many colours. It should be one colour at a time.
Edit: actually it doesn’t look to bad but the guy above is right. Green should be replace with something else. Maybe warm white?

Agreed one color at a time. How about

3.9v or more color: green
3.3v-3.9v color: yellow or amber
2.9v-3.3v color: red
2.9v or less: OFF

Aux color status showing depended on the Volts is a good idear, but bling bling overload especially Pink is a “No Go”…
Would be nice to choose the color of Aux…

I like the green and blue. Being able to choose colors would be the best choice.

I agree, one color at time, if all aux colors are on at the same time it will look hideous lol

if it has Anduril then it has volt readout already, no need for the aux lights to show battery status imo

I couldn't agree more. I did feedback to BG today but i believe it is already too late to make changes to it. Wish they have shared the demo to me earlier.

According to LEXEL's AUX board diagram, brightness of the LEDs can be adjusted with the trimmers. Maybe we can disable from there? We will get LEXEL to explain on this later.

I also absolutely agree. Don’t mix up Aux light colors!!!

If they didn’t glue the bezel.

Folks, joined the Interested list a few weeks ago. This will be my first Interested project I’ve participated in. Now that manufacturing has begun, what is the procedure from this point forward for participants? When it’s available, do we simply purchase from BG with a code? Are there other steps necessary to complete the process?

Thanks guys!

You should get a PM with instructions.

Terrible. Looks awful. I would prefer 1 color aux LEDs

they should not make such drastic multi-color aux leds without even asking, shame its just too much “bling-bling”…

If it hasn’t changed, the aux LEDs can be turned off in firmware. There are four modes: off, low, high, and blinking.

I generally set it to low when the main LEDs are off, or blinking when the light is locked.

that’s good news! I will be turning my Aux off because of the christmas lights

Interested ! Please add me to this Group Buy :THUMBS-UP:

:BEER:

- SAM -

As others are stating, multi-colored options for the aux lights is fine if you have the ability to choose. But if the Disney Electric Parade effect is unacceptable if that’s the only option.

So no controls within the UI like on the D4S? That’s annoying. Not everyone has the rigs to flash firmware anytime they please.

This is getting less and less ‘Interesting’ as we learn more.