My Imalent DX80 caught fire, vented smoke, almost exploded (replacement head arrived)

The photos probably helped determine its likely a component failure or bad trace/solder point. its likely an isolated incident, as like any electronic component, every now & then a bad one fails. Remember the 7880 20-mode driver fire i had a few years ago in a single AA light? that little firecracker went off like july-4th on three NiMH AA cells in parallel.

I started loosening the caps months ago just in case. Something none of us want to think about, but we know there will always be a certain risk that we have to live with whether we like it or not.

Same here. Better safe than sorry. Pretty much the only light that’s “live”, is the light I actual carry.
All my lights come with batteries, and almost all the Li-ion ones are mechanical locked out.
Unless that’s not possible, like Cu, Ti, and SS lights, and lights with flaky matte ano.
Those lights I store with a plastic disk between tailspring and anode.
Most of them are in the same place (cupboards). If one battery goes rogue, it will be like the 4th of july.

ALL my tail caps are loosened in my smaller lights[Initial reasons are parasitic drain and accidental activation] and my bigger lights[3 or 4 batteries w/ carriers] have the batteries in big pill bottle w/ silica gel packet,until I use them. I also have silica gel packets in ALL the body tubes. I started this in 2013 when condensation became an issue w/ some of my lights,starting w/ the TK75 which I started and what turned out to be a massive thread for a few years[CPF]

NOW after reading this thread I have another and BETTER reason to loosen tail caps! :sunglasses:

my god

My DX80 blew up again, WTF!
I mechanically locked it out before use because the damn button is so easy to turn on. I twisted the light and tried to turn it back on, smoke went to the glass, light stinks and now dead, SUCKSSS!

sigh…. guess they should switch name, from Imalent to Imminent death instead… :person_facepalming: really ditch that crap and buy it a better brand like olight,acebeam etc with better warranties and quality. its awful how it can happen a second time… their QA is worse then any other brand i know off today.

if that was an american brand u could have sue them for huge money, but since they are from china they can produce whatever crap and get away with it…

Wow,I am sorry to hear that. My friend had the same light. It did not blow up but had all kinds of issues and was inoperable.From his experience alone, and I have heard of others, I decided never to get that brand.

My Olight, Thrunite, Fenix, Convoy have had zero issues. Great customer service for replacement parts[Holster and cigar rings] that were given to me for free! :smiley:

wow sounds like a similar incident to what happened to mine… can you post any photos of the damage?

I just took pictures but posting them, forget it, third party and shrinking them, too much work.

Why does this have to happen again?

How many drivers shorts have to happen for this to be fixed?

I would try Olight since they have customer service in the USA that is great and they don’t sell pipe bombs.
Or you know what they say… third time’s a charm. Of course that one could either work, or kill you. Not sure.

You will only get 25,000 lumens out of Olight, but some people know when to quit.

“but some people know when to quit.” :smiley:

:laughing:

They may be cutting corners, or it may just be that Imalent is really pushing the bleeding-edge of tech to produce very high-powered lights. With all that power, comes safety and reliability concerns. You can’t really compare a 30,000 lumen light to a 1,000 lumen light.

I think I’ll be returning my ms18.

.

I like Olight too for their premium feel and quality but their lights cost 3x as much as Imalent. For Olight to build a light like MS18 it would cost like $2,000 with all the overly conservative safety features they would build in. But I doubt a company as conservative as Olight would be willing to push the performance envelope like Imalent would so we would never see these ultra high powered flashlights if it weren’t for Imalent. You get what you pay for.

TY…. :+1:

It doesnt matter, user concern is a big thing now when it comes to Imalent, who wants a light that blows up in your hand? not many i guess… whats the point pushing lumens war if that high lumens means the user cannot feel safe buyin such light? then i want less lumens but reliable and doesnt explode in your face. Its only a matter of time before we will read someone died operating a high lumens Imalent light…

Yes, I agree. But, there are some people that just want the max possible, and are willing to push the safety limits. Somebody is going to sell to them. We have 100,000 lumen handheld flashlights now. Totally ridiculous, but there’s an entertainment factor that draws some people to them. Lots of other entertainment is dangerous too (bungee cord jumps, parachuting, car racing, a motorcycle, etc.).

Yes but at least you die doing something extreme, not holding a flashlight. I think kids and neighbors will laugh they saw us die by flashlight.