FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public

[SamHaLeKe]

@xevious

Prince explained the meaning of “Purple Rain” as follows: “When there’s blood in the sky – red and blue = purple… purple rain pertains to the end of the world and being with the one you love and letting your faith/god guide you through the purple rain.”

Off Topic: For China it means spiritual awareness, physical and mental healing, hence strength, abundance, red purple brings luck and fame. Purple (紫; zǐ) refers to the North Star (Polaris), which in ancient China was called the Ziwei Star, the North Star was in traditional Chinese astrology the abode of the Celestial Emperor. (see also: Purple Forbidden City).

:D

- SAM -

[Neal]

@SamHaLeKe

@xevious

Prince explained the meaning of “Purple Rain” as follows: “When there’s blood in the sky – red and blue = purple… purple rain pertains to the end of the world and being with the one you love and letting your faith/god guide you through the purple rain.”

Off Topic: For China it means spiritual awareness, physical and mental healing, hence strength, abundance, red purple brings luck and fame. Purple (紫; zǐ) refers to the North Star (Polaris), which in ancient China was called the Ziwei Star, the North Star was in traditional Chinese astrology the abode of the Celestial Emperor. (see also: Purple Forbidden City).

- SAM -

exactly!

[SamHaLeKe]

@Neal

@SamHaLeKe

@xevious

Prince explained the meaning of “Purple Rain” as follows: “When there’s blood in the sky – red and blue = purple… purple rain pertains to the end of the world and being with the one you love and letting your faith/god guide you through the purple rain.”

Off Topic: For China it means spiritual awareness, physical and mental healing, hence strength, abundance, red purple brings luck and fame. Purple (紫; zǐ) refers to the North Star (Polaris), which in ancient China was called the Ziwei Star, the North Star was in traditional Chinese astrology the abode of the Celestial Emperor. (see also: Purple Forbidden City).

:D

- SAM -

exactly!

欢聚一堂

生意兴隆

[Neal]

@SamHaLeKe

@teacher

/\ … Where did the picture come from??

I think that here at BLF most just forget that this is a collaboration between TLF and BLF.

So there are efectively TWO comunities ACTIVE for this flashlight.

TLF is even holding a “official” poll on wich collor it should be! One can only choose two colors for fisrt run …

Seems that the communication is one direction these days?

- SAM -

i make a poll in BLF,
so let’s choose which color we make.

Link: Which two colors of FW3A you prefer?

[SamHaLeKe]

@Neal

@SamHaLeKe

@teacher

*/* … Where did the picture come from??

I think that here at BLF most just forget that this is a collaboration between TLF and BLF.

So there are efectively TWO comunities ACTIVE for this flashlight.

TLF is even holding a "official" poll on wich collor it should be! One can only choose two colors for fisrt run ...

Seems that the communication is one direction these days?

:BEER:

- SAM -

i make a poll in BLF, so let’s choose which color we make. Link: Which two colors of FW3A you prefer? !https://cdn.shopify.com/s/files/1/0031/0155/6806/files/colors.7.jpg?280!

Thank you Neal :THUMBS-UP:

Edit: if possible, please make sure all future FW3A versions ship with latest Unduril as (next to the design) It's The Purple Star of this flashlight :D

[teacher]

Thanks for the FW3A Color Choice Poll Neal!!

It’s a tough choice……

The Purple is a given, gotta have it. But it’s a tough call between the Blue & Army Green…. I like them both.

[zak.wilson (Zak)]

The SST-20 in TK’s photos looks very green. I’ve never seen one that looks that bad, though they certainly don’t look good next to the 219B sw45k I have in my FW3A.

Tint beamshots are hard. Cameras capture colors differently, automatically post-process colors differently unless the photographer shoots in raw and does it manually, and displays display them differently. When I tried to get beamshots of the Armytek Prime XHP35, which is very rosy according to maukka’s testing, it just looked neutral. The beamshot in maukka’s review looks a little rosy, but doesn’t really capture it.

Anyway, I wouldn’t like SST-20s my eyes see the way TK’s camera does, but the FB4s I have don’t look nearly that bad. The FA3 supposedly being offered for the FW3A should be considerably better. I have FD2s on the way, and I have some Lee 801 minus green, which makes FB4 look great. Filters are a lot easier than sourcing emitters with nice tint the way the LED market is going lately.

[BlueSwordM]

Yeah. They look extremely green.

[Lick]

Wow what a dreadful tint. I like the throw on it but I don't know if I want a different batch 219C or an SST20 that may be 3500k or 4000k. I was trying to choose until I found out that the 219C version does not exist and I cannot add it to my cart. I will take the maybe bad DUV and swap if I need to. Good luck to everyone hope we all get a good one!

We can at least all agree that its relative to the other LEDs. It was not "as green" before, but it is relatively so. I am coping hard because I hope that its a good DUV now. -_-

Now if I order it, it should be here in in about a month. So exciting!

[teacher]

@SamHaLeKe

@teacher

/\ … Where did the picture come from??

I think that here at BLF most just forget that this is a collaboration between TLF and BLF.

So there are efectively TWO comunities ACTIVE for this flashlight.

TLF is even holding a “official” poll on wich collor it should be! One can only choose two colors for fisrt run …

Seems that the communication is one direction these days?

- SAM -

I really don’t think most people who know, forget TLF is equally in on this too. So yeah, as you stated; that would make “TWO comunities ACTIVE for this flashlight”.

But when someone posts pictures (now deleted) with no caption or informarion besides…. “tint choices :heart_eyes: ” …. It is kinda natural to want to know where they came from. Especially since these light are not on the market yet.

So…. I’ll just now figure they came from TLF.

As far as the “one was communication” you mention… I have no idea?? But now that I really think about what you said, it does seem BLF gets quite a bit of 2nd & 3rd hand info.

But… at least we get it. So it’s all good…. … :+1:

[contactcr]

People need to stop comparing to 219B, it’s too far under the BBL to make a good comparison for 99% of LEDs

[Firelight2]

TK’s SST-20 pictures aren’t that far off from what I experience when I turn on my SST-20 95-CRI lights on lower power settings. They look VERY green.

Installing a Lee minus green filter helps a lot… but the Lee #279 filter I’m using itself has major disadvantages (14% reduction in output, color temp gets noticeably warmer. Not a Zircon filter so excessive output will damage it.).

At lower power settings the green of the SST-20 is instantly noticeable. Indoors and outdoors. And even if you don’t have a less-green light on-hand to compare it to.

[Bob_McBob]

I have some SST-20 FW3As on order and I’ll post colour output results whenever they arrive.

[Klayking]

Nice, we’ll look forward to it.

[Minocc]

I got some gitd filament, made a diffuser with it.

Looks interesting with the lightning flashy.

Glow cone for FW3A

I should be getting a really nice red later this month.

[ToyKeeper]

@djozz

No SST-20 4000K 95 CRI I have ever seen in reality looks remotely so green.

It looks great if I turn it up high enough to activate the FET… in other words, 1000+ lumens. It makes an awesome 4000K white light. At the lower levels I actually use though, it’s not even close to white.

@PBWilson

That sand/oiled bronze/gold color is fantastic!

You mean the green one?

The color samples show olive green, blue, pinkish purple, and white.

It looks like it may be somewhere between “olive” and “olive drab”, somewhere between the food and the military color.

About the purple one, I’d ideally make it a bit darker… sort of a candy grape purple or midnight purple. But this pinkish purple is good too.

@SamHaLeKe

Surely hoping TK is getting one!

I hope so too!

I like purple, and I want a moonbeam button.

I hope the logo is okay. I think people were expecting me to put my avatar or “TK” or the button, but that just seems tacky. I’d rather have some sort of simple geometric design, so I made one. “Press here for moonbeams”

@SamHaLeKe

I think that here at BLF most just forget that this is a collaboration between TLF and BLF.

So there are efectively TWO comunities ACTIVE for this flashlight.

TLF is even holding a “official” poll on wich collor it should be! One can only choose two colors for fisrt run …

Seems that the communication is one direction these days?

It’s more that Bluzie at TLF is actively engaged in the ongoing FW3A process, and … I’m trying not to be. Now that it’s released, I mostly need to focus on other projects. And maybe a nap.

[teacher]

I think the ‘TK Moonbeam Button’ looks great on the ’FW3A-TK’….
.

[JasonWW]

I’m just not seeing the green. It looks more brown/bronze. Maybe it’s my screen colors deceiving me.

Is that other one white? I didn’t think you could do white anodization. I though it was a light silver that looked a bit whitish due to the camera.

[PBWilson]

I see more dark bronze.

And it DEFINITELY says “yanny” in turbo mode.

[Flying_Luminosity]

@ToyKeeper

[…] About the purple one, I’d ideally make it a bit darker… sort of a candy grape purple or midnight purple. But this pinkish purple is good too. […]

I completely agree, and I’ll be the first to admit that I’m not overly keen on the type of purple like the one pictured. We’ve already seen lights in thst shade of purple that looks almost like fuchsia (e.g. Astrolux A01 with its horrible next-mode memory). Personally, I prefer the darker tones with a higher blue component such as Cadbury’s Purple. Or if we stay with warmer tones, maybe a dark plum / wine red. There are so many shades of purple, so why stick with what is so common? That particular shade seems over-used to me - not just in flashlights but also in other products, which imho makes it look ‘cheap’. Let’s be a bit more adventurous!