Noctigon KR4, 5A constant current+DD is for sale.

688 posts / 0 new
Last post

Pages

Hank Wang
Online
Last seen: 5 min 56 sec ago
Joined: 10/19/2011 - 10:28
Posts: 412
Location: China
Noctigon KR4, 5A constant current+DD is for sale.

March, 22, Noctigon KR4 is for sale.

• 5A Constant Current + Direct Drive

• Pocket clip and lanyard ring are both included in the price, which is easy to exchange

• Discrete knurling

• Grippy anodized surface

https://intl-outdoor.com/noctigon-kr4-quad-tail-e-switch-edc-led-flashli...

——————————————————————-
March, 2, 2020, we have come back to work, everything is back to normal.
————————————————————————

November, 24, 2019, D4V2 Brass is up for sale.


——————————————————————————-

Emisar D4V2 Ti is for sale now

https://intl-outdoor.com/d4v2-ti.html

Apart from the Cu+Ti host, the main upgrade of D4V2 Ti is the switch back light.

When the light is at OFF state, the switch backlight behaves the same as the aux LED.

When the light is at ON state, the switch backlight changes brightness with the main LED.

https://intl-outdoor.com, Noctigon, Emisar, flashlight components.

Edited by: Hank Wang on 03/22/2020 - 09:38
cgocela
Offline
Last seen: 4 months 5 days ago
Joined: 05/12/2019 - 21:28
Posts: 7
Location: hongkong

Excited and waiting for it

BlueSwordM
BlueSwordM's picture
Offline
Last seen: 15 hours 46 min ago
Joined: 11/29/2017 - 12:34
Posts: 5501
Location: Canada

@Hank, are there differences in the driver circuit?

Is it a FET+1×7135 driver, or another type like the Emisar D4S?

My very own high current Beryllium Copper springs Gen 3:
http://budgetlightforum.com/node/67401
Liitokala Aliexpress Stores Battery Fraud: http://budgetlightforum.com/node/60547

pinkpanda3310
pinkpanda3310's picture
Offline
Last seen: 18 hours 33 min ago
Joined: 12/28/2013 - 08:45
Posts: 2452
Location: Perth

Are the internal parts interchangeable with V1 ? Would like to stick it in my ti version.

pennzy
pennzy's picture
Offline
Last seen: 9 hours 59 min ago
Joined: 12/10/2017 - 19:45
Posts: 1683
Location: United States , Pa.

Recessed switch?

Hank Wang
Online
Last seen: 5 min 56 sec ago
Joined: 10/19/2011 - 10:28
Posts: 412
Location: China

BlueSwordM wrote:
@Hank, are there differences in the driver circuit?

Is it a FET+1×7135 driver, or another type like the Emisar D4S?

It’s still FET+1×7135 driver.

https://intl-outdoor.com, Noctigon, Emisar, flashlight components.

oweban
oweban's picture
Offline
Last seen: 44 min 52 sec ago
Joined: 02/12/2019 - 06:34
Posts: 936
Location: Sydney AU

Daaaamn Hank!

Still all the same emitter options? SST20 helloooo

Jay
Offline
Last seen: 1 month 1 week ago
Joined: 07/02/2018 - 19:33
Posts: 104
Location: California

Will the new tail cap be compatible with the old D4?

bmengineer
bmengineer's picture
Offline
Last seen: 6 hours 50 min ago
Joined: 01/26/2018 - 11:38
Posts: 923
Location: Ontario, Canada

Looks great! Have you thought of making a single LED tube light with a smaller head? It would make a nice companion for people who want more throw without jumping up to the chunky D1

Find all my reviews of flashlights and more gear at www.bmengineer.com

zak.wilson
Offline
Last seen: 1 day 7 hours ago
Joined: 09/29/2014 - 14:27
Posts: 956

I’ve seen those pictures somewhere before….

Thanks for doing continuous quality improvement rather than continuous cost optimization like another popular multi-emitter FET driver light. It’s probably about time I bought an Emisar.

Ceilingbounce – flashlight testing and runtime graphs for Android

lotrbfme
lotrbfme's picture
Offline
Last seen: 1 week 5 days ago
Joined: 12/05/2018 - 18:03
Posts: 389
Location: FL

Interesting

AlexGT
AlexGT's picture
Offline
Last seen: 3 hours 8 min ago
Joined: 06/07/2012 - 17:39
Posts: 4409
Location: Texas

What are the dimensions of the light? Are they the exact same as the previous version?

saypat
saypat's picture
Offline
Last seen: 9 hours 52 min ago
Joined: 07/13/2011 - 20:32
Posts: 3576
Location: Calif

this will cost me! FANTASTIC!

mitsuki08
Offline
Last seen: 3 hours 59 min ago
Joined: 03/08/2019 - 05:36
Posts: 193

I just bought a D4 recently as well Facepalm . I guess it’s going to be an early Christmas when this goes on sale then.

trakcon
trakcon's picture
Offline
Last seen: 6 hours 7 min ago
Joined: 01/23/2019 - 15:50
Posts: 247

It looks great, Hank.

HONDARIDER
HONDARIDER's picture
Offline
Last seen: 1 month 1 week ago
Joined: 04/22/2018 - 11:45
Posts: 933
Location: Hot Springs, Arkansas

Decent price @$45, may take me a while to collect the ones I want. I have several of the V1’s. There goes another couple hundred bucks. Emmiter options, auxiliary light options and color options. I’m doomed, at least my bank account is. Thanks Hank. Wink

charwinger21
Offline
Last seen: 3 months 2 days ago
Joined: 02/25/2019 - 20:21
Posts: 43

Fantastic.

Are there any driver efficiency improvements as well?

The FW3A’s driver is quite popular, but Lumintop’s screwup by replacing the TIR+glass with an all-in-one plastic TIR might drive quite a few people to the Anduril D4 v2, especially if the D4 v2 does a better job of avoiding pocket activation than the original version.

contactcr
Offline
Last seen: 9 hours 21 min ago
Joined: 05/19/2017 - 18:52
Posts: 2925
Location: US

Does it still use Carclo optics or something else?

Vaxd
Offline
Last seen: 3 hours 58 min ago
Joined: 11/28/2018 - 01:45
Posts: 10

Will the magnetic tailcap be compatible with the d4v1?

korpzgrinda
korpzgrinda's picture
Offline
Last seen: 4 hours 52 min ago
Joined: 01/09/2017 - 16:52
Posts: 380
Location: Eastern Woodlands in the Wilderness of North America

Also, will the stainless bezel be compatible with the D4v1?

lightdecay
Offline
Last seen: 5 days 5 hours ago
Joined: 06/17/2019 - 08:55
Posts: 145
Location: U.S.A.

It would be great if a magnetic tail cap without the lanyard hole was also an option.

Also on my wish list: a 21700 tube.

alex64
alex64's picture
Offline
Last seen: 4 hours 8 min ago
Joined: 03/16/2017 - 01:42
Posts: 125
Location: Balearic Islands

Has the latest version of Anduril from TK with the improved stepdown?

charwinger21
Offline
Last seen: 3 months 2 days ago
Joined: 02/25/2019 - 20:21
Posts: 43
alex64 wrote:
Has the latest version of Anduril from TK with the improved stepdown?

I’m more excited for the dual stage lockout momentary (allowing for moon mode while in lockout by holding, and ~60 lumens while in lockout by double tapping and holding).

It’s still low enough that it won’t cause any major problems (beside battery drain), it’s unlikely to activate in your pocket, and it is bright enough to be useful.

 

Fingers crossed. TK messaged Hank about it 2 weeks ago when Anduril launched on the original D4 (that one was using one build version too early for dual brightness lockout momentary).

Ratus
Offline
Last seen: 8 months 2 weeks ago
Joined: 01/19/2016 - 17:30
Posts: 41
Quote:
7 aux LED colors options which is selectable through config UI,

So each light has all the aux colors?

I’m thinking that “main LED tint x 7 aux color x 3 body colors” would be way too many sku’s for anyone to stock.

Refugee from CPF and long time lurker on BLF.

Ratus_ on r/flashlight.

1536 on the GT List, Arrived 05-23-18

1271 on the FW3A List

 
 
xevious
xevious's picture
Offline
Last seen: 1 day 52 min ago
Joined: 02/27/2013 - 21:55
Posts: 1340
Location: Hoboken, NJ USA

Color me impressed. I’d passed over the D4 before… now, subscribed. Thumbs Up

How about a limited run with trit slots on the body and cap? Smile

charwinger21
Offline
Last seen: 3 months 2 days ago
Joined: 02/25/2019 - 20:21
Posts: 43
Ratus wrote:
Quote:
7 aux LED colors options which is selectable through config UI,

So each light has all the aux colors?

I’m thinking that “main LED tint x 7 aux color x 3 body colors” would be way too many sku’s for anyone to stock.

I’m guessing it means “pick your aux LED colour when ordering, and then the settings for that one colour of aux LEDs are configurable on the light”, but I could be wrong.

edit: looks like I was wrong.

Hank Wang
Online
Last seen: 5 min 56 sec ago
Joined: 10/19/2011 - 10:28
Posts: 412
Location: China
Ratus wrote:
Quote:
7 aux LED colors options which is selectable through config UI,

So each light has all the aux colors?

I’m thinking that “main LED tint x 7 aux color x 3 body colors” would be way too many sku’s for anyone to stock.


Each light has all the colors, you can choose any color by any time through ui.

https://intl-outdoor.com, Noctigon, Emisar, flashlight components.

charwinger21
Offline
Last seen: 3 months 2 days ago
Joined: 02/25/2019 - 20:21
Posts: 43
Hank Wang wrote:
Ratus wrote:
Quote:
7 aux LED colors options which is selectable through config UI,

So each light has all the aux colors?

I’m thinking that “main LED tint x 7 aux color x 3 body colors” would be way too many sku’s for anyone to stock.


Each light has all the colors, you can choose any color by any time through ui.

Colour me pleasantly surprised. Smile

Hank Wang
Online
Last seen: 5 min 56 sec ago
Joined: 10/19/2011 - 10:28
Posts: 412
Location: China

AlexGT wrote:
What are the dimensions of the light? Are they the exact same as the previous version?
The only size difference is the tailcap, which is 3mm longer than then D4V1 tailcap, due to the magnet space.

https://intl-outdoor.com, Noctigon, Emisar, flashlight components.

Hank Wang
Online
Last seen: 5 min 56 sec ago
Joined: 10/19/2011 - 10:28
Posts: 412
Location: China

alex64 wrote:
Has the latest version of Anduril from TK with the improved stepdown?
It’s with the latest anduril ui from TK.

https://intl-outdoor.com, Noctigon, Emisar, flashlight components.

Hank Wang
Online
Last seen: 5 min 56 sec ago
Joined: 10/19/2011 - 10:28
Posts: 412
Location: China

korpzgrinda wrote:
Also, will the stainless bezel be compatible with the D4v1?
Most likely, it should be compatiable, but we are not able to 100% sure since there are many different batches for the D4V1.

https://intl-outdoor.com, Noctigon, Emisar, flashlight components.

Pages