JasonWW
(JasonWW)
June 22, 2019, 10:24pm
486
Like I said a few posts back:
Also remember that the original MF01 had a set thermal stepdown and you could not adjust it. This new one is adjustable so technically you could set the thermal limit super high and control it manually which may give more turbo runtime than the original even though the new light is much brighter.
If I understand correctly, it ships with the 2019-06-02 version.
bhstinger
(bhstinger)
June 24, 2019, 2:26am
488
Hi FREE. Please add me to the list, thanks.
SamHaLeKe
(SamHaLeKe)
June 25, 2019, 10:07am
489
thank you TK, it has been noticed ...
:BEER:
- SAM -
robinogi
(robinogi)
June 25, 2019, 12:38pm
490
Interested in 2 of these, too!
Gr8Swammee
(Gr8Swammee)
June 27, 2019, 12:45pm
491
interested! please and thank you
Glennac
(Glennac)
June 27, 2019, 7:20pm
493
We’re getting close! I can smell the anodizing and flux from here.
blueb8llz
(blueb8llz)
June 27, 2019, 8:28pm
494
Interested in another 2-3
Miguel_79
(Miguel_79)
June 28, 2019, 8:53pm
495
Interested, free shipping worldwide?
Wait, what LED is this?
That’s not the SST-20.
That’s the 219C, or another 90CRI 5000k LED.
Could you ask what LED is this?
freeme
(youtube.com/@1thedeals)
June 29, 2019, 4:38pm
499
CRI is on the high side for SST20 right? I will double check with them.
@freeme , the high CRI SST-20 is only available at 4000k CCTs.
The picture shows a 5000k LED.
SKV89
(SKV89)
June 29, 2019, 5:14pm
501
Something is not right with those test results
X=0.3366, Y=0.3222 results in a CCT of 5290K and an IMPOSSIBLY ROSY duv of –0.0119
A 90Cri 5000k emitter can either be the 219C or LH351D, both are known to be greenish tinted. I would much prefer a tint mixed SST-20 3500k with 6500k to produce a tint similar to the 219B 9080 and still have 80+ CRI.
I mean, that duv could be possible with FA3 emitters.
However, that CCT has to be a 219C or LH351D.
Maybe they managed to get Digikey’s high CRI LH351D 5000k that I found last year?
SKV89
(SKV89)
June 29, 2019, 5:38pm
503
Absolutely impossible with FA3 emitters. FA3 may be able to achieve –0.00119 but not –0.0119, which will make Cree 3D and 219B 9080 look green
Wait, I just noticed too.
That duv is insanely low.
Are they taking the measurements with the red LEDs for some reason?