interested! please and thank you
Interested
We’re getting close! I can smell the anodizing and flux from here.
Interested in another 2-3
Interested, free shipping worldwide?
Yes.
We made it!
Wait, what LED is this?
That’s not the SST-20.
That’s the 219C, or another 90CRI 5000k LED.
Could you ask what LED is this?
CRI is on the high side for SST20 right? I will double check with them.
Something is not right with those test results
X=0.3366, Y=0.3222 results in a CCT of 5290K and an IMPOSSIBLY ROSY duv of –0.0119
A 90Cri 5000k emitter can either be the 219C or LH351D, both are known to be greenish tinted. I would much prefer a tint mixed SST-20 3500k with 6500k to produce a tint similar to the 219B 9080 and still have 80+ CRI.
I mean, that duv could be possible with FA3 emitters.
However, that CCT has to be a 219C or LH351D.
Maybe they managed to get Digikey’s high CRI LH351D 5000k that I found last year?
Absolutely impossible with FA3 emitters. FA3 may be able to achieve –0.00119 but not –0.0119, which will make Cree 3D and 219B 9080 look green
Wait, I just noticed too.
That duv is insanely low.
Are they taking the measurements with the red LEDs for some reason?
Interested.
I have a tint mixed sst-20 FA3 / 6500k setup in my EDC and while it looks good it is not nearly that rosy.
Hi,
I’m interested !
I am interested and want to be added to the group buy list
Interested. Please and thank you!
Interested