[M4D deal] FW3T Titanium Stonewashed - Interest list open

163 posts / 0 new
Last post
Agro
Agro's picture
Offline
Last seen: 17 hours 28 min ago
Joined: 05/14/2017 - 11:16
Posts: 4560
Location: Ślōnsk

BlueSwordM wrote:
No, it’s actually more efficient.

http://budgetlightforum.com/node/52227

http://budgetlightforum.com/node/61851

Up until 5A, the SST-20 is more efficient than the XP-L HI.


Surprising result. I had a lot of respect for SST-20 and now I have even more.
Note that TA has tested V2 bin while the top one from Hank is V4 and normally V3.
Also, TA lumens may be significantly different from maukka ones, either higher or lower.

Assuming TA lm = maukka lm V4 would be more efficient in FW3T Turbo. But without this assumption it’s not so sure…
I think it would be interesting to compile some direct comparisons…

CRX
CRX's picture
Offline
Last seen: 35 min 48 sec ago
Joined: 04/02/2013 - 15:27
Posts: 3776
Location: Scotland
M4D M4X wrote:

Neal had written about the SST20 – maybe a missunderstanding

they will test the full Ti of course and maybe dactivate the FET if needed too

Noooooo! Big Smile
Or at least make it an option.

Nite Shadow
Nite Shadow's picture
Offline
Last seen: 3 hours 2 min ago
Joined: 11/17/2011 - 00:12
Posts: 230
Location: PA, USA

I am interested in a FW3T stonewashed, only if FET is NOT deactivated..

Firelight2
Firelight2's picture
Offline
Last seen: 9 hours 47 min ago
Joined: 04/08/2011 - 15:17
Posts: 3635
Location: California

BlueSwordM wrote:
No, it’s actually more efficient.

http://budgetlightforum.com/node/52227

http://budgetlightforum.com/node/61851

Up until 5A, the SST-20 is more efficient than the XP-L HI.

Not sure we can generalize a whole lot from that since the testing was done by 2 different people. Were they both using Maukka calibrated spheres?
BlueSwordM
BlueSwordM's picture
Offline
Last seen: 4 hours 58 min ago
Joined: 11/29/2017 - 12:34
Posts: 5342
Location: Canada

At the time, no.

Maukka is more precise and accurate, and usually has lower numbers than TA.

My very own high current Beryllium Copper springs Gen 3:
http://budgetlightforum.com/node/67401
Liitokala Aliexpress Stores Battery Fraud: http://budgetlightforum.com/node/60547

MikeH
MikeH's picture
Offline
Last seen: 1 day 23 hours ago
Joined: 09/17/2011 - 08:21
Posts: 26
Location: Kansas, USA

Interested in 1 FW3T Stonewashed.

Warm white (XPL-HI 7A, SST-20 3000K – whichever is available), but can emitter swap if not available.

bucky
Offline
Last seen: 1 month 5 days ago
Joined: 01/25/2018 - 20:41
Posts: 51
Location: Delaware

Interested

EcuBebge
Offline
Last seen: 11 hours 24 min ago
Joined: 04/09/2019 - 14:24
Posts: 38

Interested in one F3WT stonewashed.

Wotorbottl
Offline
Last seen: 3 months 1 week ago
Joined: 06/20/2019 - 19:23
Posts: 2
Location: Canada

Interested in 1 stonewashed FW3T (SST-20 4000K).

M4D M4X
M4D M4X's picture
Offline
Last seen: 1 hour 45 min ago
Joined: 03/19/2014 - 05:17
Posts: 7580
Location: Austria (GMT + 1)

Yokiamy wrote:
Is it possible to buy a non stonewashed FW3Ti?


the polished + copper will be ready in a few weeks

 

already member of M4DM4X.com ?

the best deals are waiting for YOU!

 

before you buy elsewhere mail me: MARTIN@M4DM4X.COM - i will try to save you money!

abhinit90
Offline
Last seen: 1 month 2 weeks ago
Joined: 05/07/2017 - 10:31
Posts: 126

Will there be the rainbow titanium FW3As?

cujo255
cujo255's picture
Offline
Last seen: 9 hours 9 min ago
Joined: 02/27/2017 - 15:39
Posts: 76
Location: Minnesota

interested, but more interested if there would be a stonewashed with copper head

lmcmann
Offline
Last seen: 3 weeks 5 hours ago
Joined: 12/21/2017 - 12:53
Posts: 39

Interested. Would buy one for sure if I could get a copper shelf separately. Yes, I’m going to get a polished/copper for sure.

I really hope we can lego all versions of this light. And get some parts separately.

tom3091jp
Offline
Last seen: 3 months 18 hours ago
Joined: 05/29/2019 - 09:42
Posts: 1
Location: japan

I want 1 FW3T stonewashed 100%

Lion42
Offline
Last seen: 3 hours 27 min ago
Joined: 03/26/2016 - 13:46
Posts: 29

I want 1 FW3T stonewashed 100%

Scallywag
Scallywag's picture
Offline
Last seen: 10 hours 41 min ago
Joined: 01/11/2018 - 22:23
Posts: 668
Location: Ohio, United States

Looks great. I'll go in as interested

I'm not sure if I'll buy, though. The switch on my FW3A is still leaving me wanting.

EDC Rotation: ZL SC62 | Jaxman E2L XP-G2 5A | Purple S2+ XPL-HI U6-3A | D4 w/ Luxeon V | RRT-01 
EagTac D25C Ti | DQG Slim AA Ti | UF-T1 by CRX | Olight S1 | Klarus Mini One Ti
L6 XHP70.2 P2 4000K FET+7135 | Jaxman M8 | MF02 | Jaxman Z1 CULNM1.TG | Blue S2+ w/ ML Special
In-progress: Supfire M6 3xXHP50.2 
Others: Nitecore EC23 | Nebo Twyst | Streamlight ProTac 1AA | TerraLux LightStar 100

Enlightened1
Offline
Last seen: 2 days 22 hours ago
Joined: 06/11/2018 - 15:09
Posts: 20
Location: Orange County, CA

I want 1 FW3T stonewashed 100% (SST-20 4000K)

Thank you!

TUNE4IT
Offline
Last seen: 1 day 9 hours ago
Joined: 01/26/2018 - 08:20
Posts: 14
Location: Netherlands

Interested as welk. Though I would rather have the polished version..

Moefti
Offline
Last seen: 2 months 1 week ago
Joined: 05/02/2019 - 14:53
Posts: 1
Location: Netherlands

I want 2 FW3T stonewashed 100%.
Thanks!

qandeel
Online
Last seen: 3 min 24 sec ago
Joined: 11/23/2011 - 15:11
Posts: 512
Location: عُمَانْ

Interested

 عُمَانْ

mlodyulek
Offline
Last seen: 13 hours 49 min ago
Joined: 05/06/2017 - 07:16
Posts: 20
Location: NorthEast

I would be interested in one stonewashed

illuminos
Offline
Last seen: 1 hour 45 min ago
Joined: 10/17/2014 - 23:30
Posts: 85

100% want an fw3ti in sst20

oakheath
Offline
Last seen: 1 hour 11 min ago
Joined: 12/23/2017 - 11:36
Posts: 56
Location: England

Interested Big Smile

6AL4V
Offline
Last seen: 2 months 1 week ago
Joined: 07/12/2019 - 23:32
Posts: 1
Location: Kansas City

Will buy 100% 1 fw3t sst20 4000k

matjeshering
Offline
Last seen: 1 week 20 hours ago
Joined: 07/15/2019 - 08:37
Posts: 2

“I want 1 FW3T stonewashed 100%”, sst20 3000k or XPL hi 7a
Doesn’t matter if fet ist deactivated

badtziscool
Offline
Last seen: 13 hours 53 min ago
Joined: 06/18/2019 - 15:09
Posts: 7

I want 1 FW3T stonewashed 100% sst-20 4000k

hodor
hodor's picture
Offline
Last seen: 9 hours 22 min ago
Joined: 07/11/2018 - 03:58
Posts: 557
Location: UK

I haven’t seen any mention of this yet so I’ll ask the tough questions:

  1. What colour will the clip be?
  2. Will the switch be plain or will it have a bunny on it?
Innocent
Darkspace
Offline
Last seen: 4 weeks 1 day ago
Joined: 06/17/2019 - 15:59
Posts: 6
Location: United States

whats the likelihood that the fw3t is produced and how many people need to be at “100%” on buying one for this to happen?

azhu
azhu's picture
Offline
Last seen: 9 hours 27 min ago
Joined: 09/24/2015 - 06:48
Posts: 176
Location: Los Angeles, CA

I would also like to know if we can have the option of purchasing the FW3T as just a host without the mcpcb and driver. Could cut costs down a bit for those of us that end up just modding it.

Need Nichia 219b r9080 Emitters? (。◕‿◕。)

“The Light shines in the darkness, and the darkness did not comprehend it.” John 1:5

M4D M4X
M4D M4X's picture
Offline
Last seen: 1 hour 45 min ago
Joined: 03/19/2014 - 05:17
Posts: 7580
Location: Austria (GMT + 1)

i hear they test 3mm thick MCPCBs to handle the heat problems atm 

 

already member of M4DM4X.com ?

the best deals are waiting for YOU!

 

before you buy elsewhere mail me: MARTIN@M4DM4X.COM - i will try to save you money!

Pages