[USA] ☀︎ Illumn: PB2S Blue, Red, Yellow. FW1A (waiting on SST-20), FW3A in stock and shipping

Emisar refused to sell to us, limited to one USA Distributor. FireFlies we're still concerned about quality control. We could pick up the Sofirn BLF Lantern but I have a feeling they're going to just sell direct, will attempt.

KeepPower 1000mAH 14500s are now available as well as Nichia NVSL219BT-V1 SW40 D200 L2 R9080



The Thrunite T1 is an amazing light with a nice regulated driver. I bought three of them already. Perfect for gift and modding. I plan to put one of those XHP70.2 on 16mm board from Kaidomain in there and maybe some quad E21A 9080 on VR16SP4.

Turbo Glow Gaskets are now available!

FW3A Lineup expanded to include:
XP-L HI 3D 5000K NW
XP-L HI 7A 3300K WW
Nichia 219C 4000K NW

Great price!

I see some Ti and TiCu leaks. Eagerly awaiting

Subscribed

Thanks for making these available. Hover, I wish you carried the aqua color, because several people on BLF have commented that Aqua will continue to glow significantly longer than the others,even though it may be a little less bright on onset than green, which is the brightest of all colors on turn on.

Typically, green lume is the brightest and longest lasting.

I prefer aqua as well.

Received my Jetbeam jet-st titanium yesterday! Ordered on Monday! Didn’t realize you have a store so close to me could of picked it up.

We will continue trying to source the other colors.



Yeah it's not a simple thing to notify people where we're located.

And what’s the status of Malkoff stuff? :laughing:
#219B… M3x, M6x…

We are planning a production run with the 219B 4000K R9080.

I just received a Carclo 10507 optic from illumn.com. I was surprised how easy it was to remove the original optic from the FW3A that I recently got also from illumn.com. There wasn’t the excess thermal paste holding the optic as with some of the lights from the earlier batch. Anyway, I love the less floody beam with the new optic.
There is a more recognizable hot spot but still some spill. It seems to have better throw with my stt40 4000k emitters.

Could you offer a production run of the fw3a with the 219B 4000K R9080 and flashed with the lower max amp custom anduril toykeeper made for the 219b. I’d pay a premium for that since I don’t flash my own drivers.

[/quote]

Could you offer a production run of the fw3a with the 219B 4000K R9080 and flashed with the lower max amp custom anduril toykeeper made for the 219b. I’d pay a premium for that since I don’t flash my own drivers.
[/quote]

Now that would be a killer deal! A lot of tint freaks could go nuts in a second

I'd be interested in this -- depending on the price. It would be my first 219b light.

What is the lower max amp value changes in this particular case and how much of an impact is there on tint?