【convoy】convoy S12 / M21B / M4U

2073 posts / 0 new
Last post
Simon Mao
Simon Mao's picture
Offline
Last seen: 6 hours 47 min ago
Joined: 12/06/2018 - 23:44
Posts: 500
Location: China,Dong guan
Mocarny wrote:
Simon, is it possible to make turbo mode access only after 2 click, from any position(on or off) without memorizing it? So it could be 0,1% – 1% – 10% – 40% and turbo after 2 click

yes ,and what driver model?

Satan@103TFS
Offline
Last seen: 12 hours 48 min ago
Joined: 09/04/2017 - 12:51
Posts: 562

Simon when will the slightly bigger inner-diameter of your 21700 available ?

Mocarny
Mocarny's picture
Offline
Last seen: 17 hours 31 min ago
Joined: 05/10/2019 - 04:03
Posts: 174
Location: Poland
Simon Mao wrote:
Mocarny wrote:
Simon, is it possible to make turbo mode access only after 2 click, from any position(on or off) without memorizing it? So it could be 0,1% – 1% – 10% – 40% and turbo after 2 click

yes ,and what driver model?

It could be in driver for SST40 and new 3*SST20

If turbo is only 1-2 min I can’t see point of memorizing it, and it would give more modes, 4 in loop and turbo when needed. Then it could be really “turbo”, not the highest mode

Yokiamy
Yokiamy's picture
Offline
Last seen: 1 hour 9 min ago
Joined: 10/18/2016 - 15:47
Posts: 2036
Location: Netherlands

Simon, is there an easy method to change or disable the temperature regulation of the L21a SST40 driver (i have the version with 4 modes only) ?

Maybe by disassembling the temperature controller, or soldering a bypass resistor, or just bypassing it with a wire?

  BLF

Simon Mao
Simon Mao's picture
Offline
Last seen: 6 hours 47 min ago
Joined: 12/06/2018 - 23:44
Posts: 500
Location: China,Dong guan
Satan@103TFS wrote:
Simon when will the slightly bigger inner-diameter of your 21700 available ?

i’m not sure ,which mode do you need? i will leave you a message when it’s ready

Simon Mao
Simon Mao's picture
Offline
Last seen: 6 hours 47 min ago
Joined: 12/06/2018 - 23:44
Posts: 500
Location: China,Dong guan
Mocarny wrote:
Simon Mao wrote:
Mocarny wrote:
Simon, is it possible to make turbo mode access only after 2 click, from any position(on or off) without memorizing it? So it could be 0,1% – 1% – 10% – 40% and turbo after 2 click

yes ,and what driver model?

It could be in driver for SST40 and new 3*SST20

If turbo is only 1-2 min I can’t see point of memorizing it, and it would give more modes, 4 in loop and turbo when needed. Then it could be really “turbo”, not the highest mode

i have a driver sample ,0.1%-3%-30%,double click turbo

KevinZA1988
KevinZA1988's picture
Offline
Last seen: 11 hours 36 min ago
Joined: 02/26/2018 - 02:26
Posts: 734
Location: South Africa

Simon, that mode spacing sounds good to me for the XHP35.

Astrolux MF01 Mini, BLF Q8, BLF A6, BLF FW1A, BLF FW3A, BLF FW3C, Convoy L6, Convoy C8+ , Convoy S3, Convoy M21A, Convoy S11, Emisar D4, Fireflies E07, Jaxman E2L, Lumintop EDC18, Manta Ray C8.2 long version, Olight S1R Baton II special edition series, S2R Baton II, Nitecore HC65, Olight H1R Nova.

https://photos.app.goo.gl/JaJaDv4V838AEJf39

Mocarny
Mocarny's picture
Offline
Last seen: 17 hours 31 min ago
Joined: 05/10/2019 - 04:03
Posts: 174
Location: Poland
Simon Mao wrote:
Mocarny wrote:
Simon Mao wrote:
Mocarny wrote:
Simon, is it possible to make turbo mode access only after 2 click, from any position(on or off) without memorizing it? So it could be 0,1% – 1% – 10% – 40% and turbo after 2 click

yes ,and what driver model?

It could be in driver for SST40 and new 3*SST20

If turbo is only 1-2 min I can’t see point of memorizing it, and it would give more modes, 4 in loop and turbo when needed. Then it could be really “turbo”, not the highest mode

i have a driver sample ,0.1%-3%-30%,double click turbo

There can be even 4 modes, but 3 are ok too. But 2 click turbo should be from any state, on or off, and long press for low is really great and handy, no need to cycle through all this bright levels. Good reading light is about 20-25 lm in warm white or NW, in CW little less (for me), so if it is an EDC light (in my opinion 3*sst20) there should be mode to have this 25 lm. 40 lm is too much for me, M3 has ~ 40 lm on 1% and it is too bright for reading, but good enough for walking. But M3 isn’t EDC reading light, I guess, so it is ok Silly

Will it be diffuser for 3*sst20?

Yokiamy
Yokiamy's picture
Offline
Last seen: 1 hour 9 min ago
Joined: 10/18/2016 - 15:47
Posts: 2036
Location: Netherlands

Yokiamy wrote:
Simon, is there an easy method to change or disable the temperature regulation of the L21a SST40 driver (i have the version with 4 modes only) ?

Maybe by disassembling the temperature controller, or soldering a bypass resistor, or just bypassing it with a wire?

Simon, any ideas about this ?

  BLF

Simon Mao
Simon Mao's picture
Offline
Last seen: 6 hours 47 min ago
Joined: 12/06/2018 - 23:44
Posts: 500
Location: China,Dong guan
Mocarny wrote:
Simon Mao wrote:
Mocarny wrote:
Simon Mao wrote:
Mocarny wrote:
Simon, is it possible to make turbo mode access only after 2 click, from any position(on or off) without memorizing it? So it could be 0,1% – 1% – 10% – 40% and turbo after 2 click

yes ,and what driver model?

It could be in driver for SST40 and new 3*SST20

If turbo is only 1-2 min I can’t see point of memorizing it, and it would give more modes, 4 in loop and turbo when needed. Then it could be really “turbo”, not the highest mode

i have a driver sample ,0.1%-3%-30%,double click turbo

There can be even 4 modes, but 3 are ok too. But 2 click turbo should be from any state, on or off, and long press for low is really great and handy, no need to cycle through all this bright levels. Good reading light is about 20-25 lm in warm white or NW, in CW little less (for me), so if it is an EDC light (in my opinion 3*sst20) there should be mode to have this 25 lm. 40 lm is too much for me, M3 has ~ 40 lm on 1% and it is too bright for reading, but good enough for walking. But M3 isn’t EDC reading light, I guess, so it is ok Silly

Will it be diffuser for 3*sst20?

uh ,it’s for reverse switch ,it only works when flashlight is on .
In the future, I can design a diffuser for 3*SST20 flashlight

Simon Mao
Simon Mao's picture
Offline
Last seen: 6 hours 47 min ago
Joined: 12/06/2018 - 23:44
Posts: 500
Location: China,Dong guan

Yokiamy wrote:
Yokiamy wrote:
Simon, is there an easy method to change or disable the temperature regulation of the L21a SST40 driver (i have the version with 4 modes only) ?

Maybe by disassembling the temperature controller, or soldering a bypass resistor, or just bypassing it with a wire?

Simon, any ideas about this ?

i didnt get reply from manufacturer,yet.
i will reply you later

Yokiamy
Yokiamy's picture
Offline
Last seen: 1 hour 9 min ago
Joined: 10/18/2016 - 15:47
Posts: 2036
Location: Netherlands

Simon Mao wrote:
Yokiamy wrote:
Yokiamy wrote:
Simon, is there an easy method to change or disable the temperature regulation of the L21a SST40 driver (i have the version with 4 modes only) ?

Maybe by disassembling the temperature controller, or soldering a bypass resistor, or just bypassing it with a wire?

Simon, any ideas about this ?

i didnt get reply from manufacturer,yet.
i will reply you later

Thank you, looking forward to it !

  BLF

hodor
hodor's picture
Offline
Last seen: 9 hours 2 min ago
Joined: 07/11/2018 - 03:58
Posts: 573
Location: UK

Anyone tried the SST40 in DA tint yet?

KevinZA1988
KevinZA1988's picture
Offline
Last seen: 11 hours 36 min ago
Joined: 02/26/2018 - 02:26
Posts: 734
Location: South Africa

Still waiting for my 5000K DA from Simon and 5000K DD from Kaidomain to be delivered.

Astrolux MF01 Mini, BLF Q8, BLF A6, BLF FW1A, BLF FW3A, BLF FW3C, Convoy L6, Convoy C8+ , Convoy S3, Convoy M21A, Convoy S11, Emisar D4, Fireflies E07, Jaxman E2L, Lumintop EDC18, Manta Ray C8.2 long version, Olight S1R Baton II special edition series, S2R Baton II, Nitecore HC65, Olight H1R Nova.

https://photos.app.goo.gl/JaJaDv4V838AEJf39

hodor
hodor's picture
Offline
Last seen: 9 hours 2 min ago
Joined: 07/11/2018 - 03:58
Posts: 573
Location: UK

Ooo will be interesting to see how those compare Innocent

KevinZA1988
KevinZA1988's picture
Offline
Last seen: 11 hours 36 min ago
Joined: 02/26/2018 - 02:26
Posts: 734
Location: South Africa

Yeah I’m quietly optimistic… I hope that they will be a lot better than the “regular stuff” they have always sold in the past.

Astrolux MF01 Mini, BLF Q8, BLF A6, BLF FW1A, BLF FW3A, BLF FW3C, Convoy L6, Convoy C8+ , Convoy S3, Convoy M21A, Convoy S11, Emisar D4, Fireflies E07, Jaxman E2L, Lumintop EDC18, Manta Ray C8.2 long version, Olight S1R Baton II special edition series, S2R Baton II, Nitecore HC65, Olight H1R Nova.

https://photos.app.goo.gl/JaJaDv4V838AEJf39

Wieselflinkpro
Wieselflinkpro's picture
Offline
Last seen: 1 hour 40 min ago
Joined: 05/21/2015 - 04:34
Posts: 944
Location: Germany - TLF

Wieselflinkpro wrote:
Is it possible, that you fit your 22mm XHP35 Boost-Driver to a 17mm driver board? That would be realy great.

Hi Simon, did you overread my question?
Simon Mao
Simon Mao's picture
Offline
Last seen: 6 hours 47 min ago
Joined: 12/06/2018 - 23:44
Posts: 500
Location: China,Dong guan

Yokiamy wrote:
Simon Mao wrote:
Yokiamy wrote:
Yokiamy wrote:
Simon, is there an easy method to change or disable the temperature regulation of the L21a SST40 driver (i have the version with 4 modes only) ?

Maybe by disassembling the temperature controller, or soldering a bypass resistor, or just bypassing it with a wire?

Simon, any ideas about this ?

i didnt get reply from manufacturer,yet.
i will reply you later

Thank you, looking forward to it !

Simon Mao
Simon Mao's picture
Offline
Last seen: 6 hours 47 min ago
Joined: 12/06/2018 - 23:44
Posts: 500
Location: China,Dong guan
Wieselflinkpro wrote:
Wieselflinkpro wrote:
Is it possible, that you fit your 22mm XHP35 Boost-Driver to a 17mm driver board? That would be realy great.
Hi Simon, did you overread my question?

17mm is too small ,friend

Satan@103TFS
Offline
Last seen: 12 hours 48 min ago
Joined: 09/04/2017 - 12:51
Posts: 562

Simon is it possible to make XHP35 driver to run on 1S/2S battery and in 20 MM size?

VaKo
Offline
Last seen: 1 day 23 hours ago
Joined: 08/15/2015 - 15:28
Posts: 168
Location: United Kingdom

Got an issue with my XHP35 driver in a L21A host with a freshly charged 40T – on 100% mode it will just flash and drop back down to 1% mode instantly. Also makes a high pitched whine sound that gets louder as you go to 10% and 40%.

Any ideas?

Simon Mao
Simon Mao's picture
Offline
Last seen: 6 hours 47 min ago
Joined: 12/06/2018 - 23:44
Posts: 500
Location: China,Dong guan

VaKo wrote:
Got an issue with my XHP35 driver in a L21A host with a freshly charged 40T – on 100% mode it will just flash and drop back down to 1% mode instantly. Also makes a high pitched whine sound that gets louder as you go to 10% and 40%.

Any ideas?

high resistance or low voltage,friend

Simon Mao
Simon Mao's picture
Offline
Last seen: 6 hours 47 min ago
Joined: 12/06/2018 - 23:44
Posts: 500
Location: China,Dong guan
Satan@103TFS wrote:
Simon is it possible to make XHP35 driver to run on 1S/2S battery and in 20 MM size?

little small size 20mm
maybe can make xhp35 driver run on 2cells

Di_Joker
Di_Joker's picture
Offline
Last seen: 2 hours 52 min ago
Joined: 02/21/2018 - 08:07
Posts: 216
Location: RU

Hi Simon.
Is it possible, that you fit your 22mm XHP Boost-Driver to a 20mm driver board?
Will the Convoy S3 (I like the design and the lack of pill) appear with thermal control and the choice of XML and SST emitters?

Sorry for my poor english.

KevinZA1988
KevinZA1988's picture
Offline
Last seen: 11 hours 36 min ago
Joined: 02/26/2018 - 02:26
Posts: 734
Location: South Africa

Yeah I also love the S3. I have two custom built ones! I don’t even own an S2/S2+ because of the brass pill, and I won’t even buy the S21A because of that. Integrated shelf tube lights/hosts as well, please Simon?

Astrolux MF01 Mini, BLF Q8, BLF A6, BLF FW1A, BLF FW3A, BLF FW3C, Convoy L6, Convoy C8+ , Convoy S3, Convoy M21A, Convoy S11, Emisar D4, Fireflies E07, Jaxman E2L, Lumintop EDC18, Manta Ray C8.2 long version, Olight S1R Baton II special edition series, S2R Baton II, Nitecore HC65, Olight H1R Nova.

https://photos.app.goo.gl/JaJaDv4V838AEJf39

Simon Mao
Simon Mao's picture
Offline
Last seen: 6 hours 47 min ago
Joined: 12/06/2018 - 23:44
Posts: 500
Location: China,Dong guan
Di_Joker wrote:
Hi Simon. Is it possible, that you fit your 22mm XHP Boost-Driver to a 20mm driver board? Will the Convoy S3 (I like the design and the lack of pill) appear with thermal control and the choice of XML and SST emitters?

sorry ,only 22mm currently

sst40 and following driver can be installed in S3

17mm SST40 driver

Simon Mao
Simon Mao's picture
Offline
Last seen: 6 hours 47 min ago
Joined: 12/06/2018 - 23:44
Posts: 500
Location: China,Dong guan
KevinZA1988 wrote:
Yeah I also love the S3. I have two custom built ones! I don’t even own an S2/S2+ because of the brass pill, and I won’t even buy the S21A because of that. Integrated shelf tube lights/hosts as well, please Simon?

i will add a link in my store

hodor
hodor's picture
Offline
Last seen: 9 hours 2 min ago
Joined: 07/11/2018 - 03:58
Posts: 573
Location: UK

Any update on this beauty yet?

Simon Mao
Simon Mao's picture
Offline
Last seen: 6 hours 47 min ago
Joined: 12/06/2018 - 23:44
Posts: 500
Location: China,Dong guan

hodor wrote:
Any update on this beauty yet?

available soon,about in 10 days

oweban
oweban's picture
Offline
Last seen: 46 min 40 sec ago
Joined: 02/12/2019 - 06:34
Posts: 803
Location: Sydney AU

Exciting!

Pages