CRXs BIG BRASS NUTZ

CRX BIG BRASS NUTZ Triple Luxeon v2 5000K - MTN FET Driver - 18650 - Fw Clicky Sw - 3200lm.Hand made
Copper & brass construction, triple layered
Triple Luxeon v2 5000K emitters
Noctigon copper DTP MCPCB
22mm x 2mm ARC glass
Carclo 10511 TIR optic
Green GITD glow gasket
Copper pill
MTN FET Driver (GuppyDrv1)
Copper lined & sprung battery tube
Copper switch enclosure
15A Forward clicky tail switch (djozz test)
Rubber switch boot with copper button cover
Glass covered 10mm x 2.5mm green tritium vial
Green GITD hex switch surround

Max - 3200lm
cd - 6800 - 165m throw
Length - 109mm
Width - 30mm/ 34mm
Weight - 400g (With 18650 cell)Made from some 3/4" brass threaded tube, 30mm brass couplers, brass sheet, 28mm and 21mm copper tube.
This light is a bit of a monster, my heaviest build yet weighing in at four hundred grams.CRX Big Brass Nutz runtime graph:
(Still need to do the 40% test)

Oxidized.

Sometimes I wonder whether you have a real job :wink: Or do you just design, develop, engineer and craft flashlights all day :smiley:

These are wonderful! Thank you for sharing.

Same. :stuck_out_tongue:

:+1:

The industrial look and feel of so many of the builds just sets them apart. Excellent work again!

I’ve been working on this one over the last few weeks.

Is that a smear of the blood of the artist I see on the “bezel” nut? Another fantastic build.

Red pen, but there is usually blood involved :smiley:

:+1: Nicely done!!

Nice work, again :+1:

I hate to admit it CRX but you are a somewhat talented Scotsman! I am a “Knucklehead” that really admires your work.

I have one of your earlier Brass Nutz and it’s brilliant and one of my all time favorite lights.

Does your inspiration come from your constant consumption of great Scottish whiskey or your Scots penny-pinching?

And it turned out quite good :wink:

The oxidation gives it a nice look!! :sunglasses:

Those are nuts! Really nice, both of them.

You’re definitely an artist. A good one.

Beautiful work! You are an artist, technical designer, master craftsman, engineer all at once.

Amazing work as ever. Always look forward to seeing the next CRX post.

What about an angle version?

:beer:

Incredible, I’ve never seen anything like that before…

Made me look. Nice.