new JAXMAN light-M1,USB powered strong headlight

how about to use a USB powerbank for a headlight? I have tried……

Wating yours feedback…

Interesting.

More info?

try by this link: our little store. https://www.aliexpress.com/item/4000118308868.html

I like it a lot, surely will buy.
Do you have more info about the driver? What type?

And hope it’s modding friendly, without glued parts :smiley:

Does the driver maintain constant current without step down due to temperature? Does the XHP.50 version requiere higher than 6V input or is it 3V emitter?

wide scope input CC driver, without time control or temperature control. I think the Jaxman lights can bear this kind of hot… :person_facepalming:

No glue, absolutely… It that Jaxman lights means glue? :rage: :rage:

Why no temp. control?
Aren’t you afraid the light will underperform with good cooling? (e.g. while cycling) Having available unlimited power(banks) this could be a serious disadvantage.

All my Jaxman lights, unmodified run fine on high without temperature control. Also, no glue in any of them :wink: :+1:

All right then, this will be my first choice when searching for survival light.
Still, when biking, I’d rather trust thermal control than hoping “it’ll be hopefully OK”

Anyway, I’ll get this light with or without temp management.

Hi Jaxman, are the E2L hosts ever coming back? I missed them the first time around. I see the matching triple MCPCB is still for sale on the Jaxman Aliexpress page.

Does this use the XHP50.2 3V emitter?

At just 8W of power, isolated battery and massive heatsinking area I think it will do just fine. All the components inside can handle very high temps without affecting performance. We usually consider 60°C very hot but even if there was a battery in there it can run at 80°C.

hi friend, it is working at 8Watts approx. and with more heatsink in the host. we have test it, the temperature increasing will be about 27 c. so the present solution is no problem.

Rgs

hi, surely. if BLFers need it, we can. But,we cant provide assembling guide, and aftersale service…
Too busy in human resources…

Pardon me.

hi friend, yeah. the flood version is a XHP50.2 3V version inside.

hi will34, I think this with you in great. high. strong agreement, absolutely, undoubtedly,unchangeable, ever, never…. :person_facepalming:

for a simple and practical tool, the flashlight, especially a Jaxman <20 watts flashlight, I trust the old British saying:

THE SIMPLE IS THE BEST

and I want add 1 word, SOLID, for a simple flashlight.

and I also have a very small opinion, that is let flashlights to be TOOL much, not a TOY much. I am waiting the criticisms from you.

Yes, you’re right guys. I just did expect some more output than 800lm from XHP50.2 which I read after posting my doubt.
All good, we’ll take care of this light’s guts. It seems to be leaving China now.

hi dont hurry. hold on….
China is some big, so that it will take few days to leave the last Chinese shipping station :frowning:

Sure, no worries. Not the first Jaxman ordered (was lucky enough to participate in your short Z1 and X1 hosts actions - please repeat!)