KC1 keychain light is available now

Do you have a magnetic tail cap installed? Does it do it with the non-magnetic one as well?

Some of the talk around the issue was EM fields interfering and making magnetic tail or other small parts vibrate or resonate.

No magnetic tailcap I did not get it because I have a d4s with one to work on stuff with

I’ve done some research and it seems it’s quite commonplace wuth these lights having inductors

Has anybody had any luck putting the V2 stainless bezel on a V1 light?

I have a V1 and V2. The aluminum bezels can be easily swapped between the two. Stainless bezel threads onto the V2 easily, but won’t thread onto the V1. It goes on approx 1 turn and then stops, as if it’s the wrong thread pitch. I don’t think the threads are different though because the aluminum bezels interchange without an issue.

:question:

Are the threads trapezoidal in the V2 head and triangular in the V1 head?

I have an Early Cyan V1 and a V2 and neither the aluminum or stainless bezel from V2 not fit on my cyan V1.

That could be it. The threads do look a little different.

I have been carrying the D4V2 with raised switch ring in my front pants pocket all day long for one week now and just got my first spontaneous activation. This is much better than the V1 (with flat switch ring) that went nuclear twice in the first day. The max ramp of my V2 was set at 450 lumen so when I felt it warming up there was plenty time to notice and switch it off again.
This is what else is in the pocket:

Did you secretly sand your C01S down?

No, this is the no-ano low-high version, it polishes itself to a nice shine having been in my pants for a few months.

Quite a bit of stuff! That must create an interesting bulge in your pants….

DJozz you EDC a pencil sharpener?

Family board game night EDC.

where is the pool cue???

Sand’s natural fine polish is fine sand.

I do, I’m a teaching assistent in secondary school, in biology class we do pencil drawings of biological subjects regularly and I insist on sharp pencils :smiley:

mmm kay… I can see this :slight_smile: I watched Big Bang Theory before…… :wink: :+1:

Love my D4V2 it’s a fantastic light. However, I opted for the SST-20 5000k hoping for max power and throw, which it definitely delivers on high/turbo. Sadly as others have reported the tint is super green at anything less than about 80% brightness. It’s ugly.

I love the SST-20 4000k emitters in my D4S and FW3A tint-wise, though they are not quite as blisteringly bright.

Now I might just have to order another D4V2 with XPL-HI 3A emitters.

I wish Hank made it in titanium too

Yes, there will be cooper + titanium D4V2 Ti with the switch backlight.

on the site could you please add a 26350 battery to be able to buy it too? I mean you only letting us buy the 26650 so yep :slight_smile:

Hell yeah… and I hope you can make the d1s-v2 with a short tube that we can actually put a 18350 and a plastic tube to make the battery not shake around pleease i know it looks silly but there are few of us that like silly things :stuck_out_tongue: