What blade did you EDC today?

Petrified Fish PF712 flipper:

Is it a good quality brand? They have a nice gentleman with wood handle knife with 12C27 on balls bearing but I don’t like the screws they are using. Many noname knifes use the same screws and the steel must be super soft.

Both of my Petrified Fish folders arrived with excellent fit & finish, smooth action, centered blade and solid lock-up. I have no problem with the pivot screws but the pocket clips are only for tip down carry.
Those wooden handle gentleman’s folders also look nice I might give them a try sooner or later. At the moment I’m tempted by this similar styled but more robust one with 3.5” AUS-8 blade.

Today EDC are two RAD Shepherd brothers from a different mother.
Bronze Ti ano handle with brushed blade and stonewashed black Ti handle with stonewashed black Ti coated blade.

Don’t go for a swim with those in your pockets. :wink: :slight_smile:

I won’t…Can’t swim. LoL

almost no blade…

just a 1.5” blade in a 20 year old leatherman micro

maybe i would use a blade more if it was better, but as it is, i probably get that one out about once a year

my flashlight, probably 50 times a day

wle

Asymmetric flipper G10 version:

I dusted off my forgotten Brother 1607 for this Sunday:

Bugout clone with aluminium handle:

Today I carry a Twosun TS127 in S90V blade steel. I also have a TS127 in 14C28N blade steel. About as good as an EDC knife gets for $71 (S90V model), and $40 (14C28N model)

I’m still trying to figure out how to post pictures on this site. When i do figure it out, I will post some.

https://budgetlightforum.com/t/-/47268

Bottom knife is a Ka-Bar BK7 with custom scales
Second from bottom is a Twosun TS127 in S90V. I dyed the scales so to be red and black, original is orange and black.
Third is a Twosun TS127 in 14C28N. I dyed the scales to be green and black, original was light gray and black.
Then a Ruike P155 I dyed dark sapphire blue, was tan colored.
Bestech Warwolf at the top I dyed burgundy, was tan colored.

!

!

Is this ROXON worth the price? Usable scissors?

Ok, I EDC these two the most. I think I finally took a decent picture of the TS127’s. Please be patient with me and my multiple posts of pictures. I have it fine tuned now, and will minimize my pic posts going forward.

!

!

I find it easiest with imgur to go to the album and just right click the picture and “copy image address”. Then I use that link with the “Insert image” button here on the forums. I also use the “Relative width” option set to 30-50% rather than setting the dimensions. It comes out without that frame around the image, and works better for phone screens… like this (quote my post to see how I formatted it, but don’t post it again):

The S90V version looks pretty! :+1: How do you like the handle? Isn’t it too thick?

Thank you for the information.

The S90V handle is a little thicker than the 14C28N variant, because they use a wider back spacer on it. I wear a size large glove, and I find the S90V model to be a perfect fit and the most comfortable of all my EDC knives. Even if my hands were a little smaller, the S90V would still be a great fit.

The TS127’s are awesome folding knives: the action, the build quality, every aspect of its design, and materials are awesome.

[/quote]
Is this ROXON worth the price? Usable scissors?
[/quote]

Yeah I think so . I’ve used the scissors a lot and they have kept sharp so far .