Silicone Battery cases: 1x yellow and 1x green, please. If those colors are not available I would prefer black, then white, but not the black/green/yellow.
CJ - thanks for the feedback. It means a lot when I’m not the only one saying my stuff is good.
Matkinson - You should have a tracking number.
electricjelly - the wraps you asked for are ready - just waiting for your paypal address and/or shipping address will ship Monday.
Currently assembled and ready to go:
1 set A BLF Collaboration on white
1 set Let There Be Light on white
1 set Budget Light Forum on white, but the negative end of the D cell’s wrap is a little rougher than I’d like it. 90% of folks would not notice/care, but this one falls a hair shy of my standards. I’ll toss in an extra set of cases if anyone takes these before I get around to taking them apart and re-wrapping them.
I posted a positive review in the rechargeable batteries sub forum on these cells & the overall transaction 'cause I didn't know where else to post it.
I would like one set of four please
White color printed with LT1 logo and identifiers for battery A, B, C and D in the set, clear over-wrap.
Any solid color silicone case will be ok
Thanks!
I do my best to not ship like BangGood. :innocent:
That said… this week will be full of disruptions. Restocking on supplies, clearing everything from the first floor so a construction crew can rip the place apart on Friday, etc.
As much as I’d like to, I will not be able to assemble/ship much - if at all - this week. I can still talk about what you want and get your orders lined up, but please assume that no new orders will ship till next week.
Hello There!
I assume these batteries will work in the LT1?
If YES - Please put me down for [1] Set. Dealers Choice. Whatever you have lying around that you want to get rid of!
I will pay via Paypal.
Awaiting PM with directions.
Thank You for doing this!
Daniel.
If these were not LT1 compatible, I’d have a lot of expensive egg on my face by now. The GA has a taller than normal flat positive contact, so it will touch the LT1 contact ring properly. (The SP36 has the same design, and they work there)
Dan - the only set currently unclaimed is a White “Let There Be Light”. If those are what you want, I’ll put your name on them.
I’m not going to be able to ship anything till next week. If you let me know now, I can get any design & color combination you want assembled by then.
My Amazon Order for the Lantern says it will arrive in the next 25 - 60 days.
The Batteries you send me will never see the light of day until they die - they will live in the lantern forever!
No hurry on the shipping - get them out whenever you can - and no real preference on the cases.
Any 4 batteries and any 2 cases will be awesome.
Thank You Again for all the super hard work and effort on this project!
amishbill, I will take one set. What ever color and design you have available will be fine. The color of the cases doesn’t matter either. Send me your paypal info and I’ll pay you quickly. Thanks
You lucked out - I was able to get one of my last assembled sets packed & sent on my way out the door to enjoy the thrills of getting everything out of half our house so the floors could be replaced. We’re still working on getting everything back in from the porches.
Tarvos, Jigsaw — PMs in your mailboxes.
Anyone else on the fence - I’m getting my supplies together to have another assembly run. Want a set of Pink LET THERE BE LIGHT or a Bright YELLOW A BLF COLLABORATION set? This is the time to make your request!