Sofirn C01R deep red [sold out, discontinued]

Commercial Sellers' Spot BLF User Negotiated Deals
19

Interested in two. Thanks Lux-Perpetua!

20

hi I am interested.
I am using Clemence Virence JetBeam Nichia Deep Red LED at moment AAA.

any differences ?
thanks.

21

I’m interested but my interest caps at twenty bucks. If it’s under fifteen bucks, I’d buy at least one. At ten bucks or less, I’d buy at least two.

22

Interested in two units. Deep red anodization would be nice.

23

Interested.

Been wanting a simple, small, just-red light.

24

Interested in two

25

Interested only, if Deep Red emitter is used (then, 2 pcs).

26

Interested

Thanks,
Mike

27

Interested in deep red. 3 pcs.

28

Please note that XP-G3 deep red is not confirmed, pending more evaluation on actual dome size (need to fit underneath the C01S optic), availability, beam quality and additional costs. Priority is currently given to XP-E2 red (625nm).

29

Interested

30

Interested in two.

31

Interested.

If possible both LEDs (625, 660 nm)

32

What about XP-E2 Photo Red (660 nm)? If the photos are accurate, it has the same dome size as XP-E2 Red (625 nm).

33

Interested in two.

34

Two please

35

Interested

36

Interested

37

Interested

38

As far as I know, looks like a C01S with emitter swap. It should be straight away compatible unless the emitter Vf is too low. According to Cree XP-E2 datasheet Vf for photo red at 350mA is 2.05V. Since the C01S drives the SST-20 at ≈300mA on high, doability will depend on the C01S driver's minimum input/output voltage difference. In low mode the XP-E2 photo/XP-G3 deep red will have a very low Vf, but there's a super pretty good chance it'll handle it, at least if Sofirn did their homework well with the C01S driver.